2.556 bytes |
Service Hints & Tips |
Document ID: RMIE-3BFFDF |
IBM PC350/PC750 - Cover bends & shifts with large monitor
Applicable to: World-Wide
Abstract :
PC 350/750 Cover Bends & Shifts w/Large Monitor on Top
Text :
A large display installed on top of an IBM PC 300/700 Series 6581, 6583, 6585, 6586, 6587, 6885, 6886 or 6887 (all 5x5 chassis models) system unit may cause the top cover assembly to bend and/or shift if the cover is not installed properly.
When installing the top cover assembly, ensure that the cover tabs on each side of the cover line up with the openings on the base frame assembly, and that the cover top front is flush against the front panel. The rear latch should be held down while installing the top cover and locked into place to secure the cover assembly.
The proper installation of the top cover assembly will prevent the appearance of bent sides due to the cover tabs not being aligned with the base frame openings and eliminate the improper fit caused by the cover being moved whenever the monitor is shifted.
SAS Keywords :
PSVP PSY2 IBMPC PSY2DISP
PSVPDISP BENT D/T6581 D/T6583
D/T6585 D/T6586 D/T6885 D/T6886
D/T6887 D/T6587 PC750 PC300
PC350 UNCLASSIFIED
Search Keywords |
| |
Hint Category |
Retain, General Information | |
Date Created |
15-11-96 | |
Last Updated |
11-05-98 | |
Revision Date |
23-04-99 | |
Brand |
IBM PC | |
Product Family |
PC 350, PC 750 | |
Machine Type |
6581, 6583, 6585, 6586, 6587, 6885, 6886, 6887 | |
Model |
Various | |
TypeModel |
| |
Retain Tip (if applicable) |
H135118 | |
Reverse Doclinks |