|
3.522 bytes |
Service Hints & Tips |
Document ID: MCGN-3YLRYL |
Netfinity 7000 M10 - Multiple FORE ATM adapters do not work with NetWare driver
Applicable to: World-Wide
SYMPTOM:
When trying to load driver for second card (referred to as ATM slot = 1), get one (1) of the two (2) following messages:
- Message 1:
LOADING MODULE FORENP2E.LAN
4-16-98 2:11:49pm ATMTSM-1.8.6
ATM HSM FORENP2E HARDWARE REGISTRATION FAILED
FORENP2E: atmtsm_hsm_Control error code -3
FORENP2E: Unable to map adapter RAM into NETWARE
Server-4.11-1957 Attempt to reinitialize re-entrant module failed.
- Message 2:
Loading Module FOREFP2E.LAN
Server-4.11-1957 Attempt to reinitialize re-entrant module FAILED.
FOREMUX: FOREFP2E assigned unit number 1
FOREMUX: Unable to set hardware interrupt
FOREFP2E: Unable to map adapter Ram into NetWare
PROBLEM ISOLATION AIDS:
- The system is a Netfinity 7000 M10 server, Type 8680, all models.
- The system is running Novell NetWare 4.11
- The system has two (2) ForeSystems ATM adapters installed.
- The system complies with the symptom listed in the above "Symptoms" section.
FIX:
Dual "Fore" adapters work with the FAT drivers (forefp2e.lan, 2/12/98) when the PCI IRQ settings are adjusted so that the two (2) Fore cards are not sharing an interrupt with anything else. This means assigning everything else to one IRQ.
Note: Only 9, 10, and 11 are available to reassign.
Also, when using ServeRAID and the Adaptec devices, the newer .ham drivers are more compatible than the older .dsk drivers, when using ForeSystems adapters.
DETAILS:
NetWare 5 will supposedly eliminate this problem.
TRADEMARKS:
Other company, product and service names may be the trademarks or service marks of others.
SAS KEYWORDS:
PSY2, D/T8680, NETFINITY, UNCLASSIFIED, FORESYSTEMS, ATM, NOVELL, NETWARE4.11, 8680ERR, 8640PROG, PCI, IRQ, H164732
|
Search Keywords |
| |
|
Hint Category |
NetWare, Retain | |
|
Date Created |
23-09-98 | |
|
Last Updated |
14-01-99 | |
|
Revision Date |
14-01-2000 | |
|
Brand |
IBM PC Server | |
|
Product Family |
Netfinity 7000 M10 | |
|
Machine Type |
8680 | |
|
Model |
ALL | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H164732 | |
|
Reverse Doclinks |
Date last altered: A98/09/17 |