|
2.627 bytes |
Service Hints & Tips |
Document ID: JBAR-3UXNE4 |
IBM PC300PL (Type 6862, 6892) - Supported memory types
Applicable to: World-Wide
TEXT:
The following sections, taken from product announcements and online user publications, document the supported memory types, and memory speeds in IBM PC300PL Series 6862/6892 systems equipped with an Intel 440BX chipset featuring a 100MHz front-side bus.
Working with System Memory
You can add memory to your computer to increase system performance. Your computer has three connectors for installing system memory modules. The maximum amount of system memory your computer supports is 384MB.
Note: To locate the memory connectors inside your computer, see Identifying Parts on the System Board on page 13.
The memory modules your computer uses are dual inline memory modules (DIMMs). The IBM-installed DIMMs that come with your computer are nonparity (NP) or ECC (error correcting code) 100Mhz SDRAM (synchronous dynamic random access memory) modules.
When installing or replacing DIMMs, follow these guidelines:
1. Use only 3.3 V dc, unbuffered, 100 MHz DIMMS.
2. Each memory connector supports a maximum of 128 MB of SDRAM.
3. Install only ECC SDRAM DIMMS to enable ECC. Do not mix non-parity DIMMS and ECC DIMMS.
When you are adding or removing memory, you can use any combination of DIMM sizes 16, 32, 64, or 128 MB.
System Memory:
* Expandable to 384 MB.
* Three 168-pin DIMM sockets, 3.3 V ECC and nonparity SDRAM supported.
* 100 MHz DIMMs supported.
SAS KEYWORDS:
PSY2 PSY2MEM CDT CDTMEM
D/T6862 D/T6892 6862 6892
UNCLASSIFIED
|
Search Keywords |
| |
|
Hint Category |
Memory, Retain | |
|
Date Created |
29-05-98 | |
|
Last Updated |
01-06-98 | |
|
Revision Date |
29-05-99 | |
|
Brand |
IBM PC | |
|
Product Family |
PC 300PL | |
|
Machine Type |
6862, 6892 | |
|
Model |
all | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H163765 | |
|
Reverse Doclinks |