|
3.792 bytes |
Service Hints & Tips |
Document ID: RMIE-3FZBGT |
Aptiva - 2136 Hardware interfaces
Applicable to: World-Wide
Hardware Interfaces
The following peripheral interfaces for adapters, options, and drives are supported in the system unit.
|
Table 1- 1 System Board Hardware Interfaces |
|
Item Interface |
|
Hard disk drives - Two Enhanced IDE mode 4 local bus interface (American National Standards Institute-ANSI) |
|
Input/output (I/O) adapter cards - IBM AT-ISA Plug and Play compatible fax/modem adapter card that operates at 8 MHz bus speed |
|
Diskette drive - AT diskette interface |
|
Video - For refresh rates and monitor frequency settings, see "Refresh Rates and Monitor Frequencies" in the 2136 Hardware Maintenance Manual. Physical interface is compatible with the IBM Personal System/2 (PS/2) VGA interface. |
|
Serial port - 9-pin connector with RS232D electrical interface |
|
Parallel port - Bidirectional, ECP bidirectional and EPP bidirectional interfaces are supported. |
|
Pointing device IBM PS/2-compatible mouse |
|
Keyboard device - IBM PS/2-compatible enhanced keyboard |
|
CD-ROM drive - AT IDE, extended architecture (XA) enabled drive |
|
Sound - Sound feature is built in system board with the compatibility to Sound Blaster (Creative Labs, Inc.). Wave table feature is resided in Audio-I/O adapter card. |
|
Table 1- 2 Audio-I/O Card Hardware Interfaces |
|
Item Interface |
|
Game Port - Game port interface for joystick, it also supports MIDI feature. |
|
Microphone-in |
|
Search Keywords |
| |
|
Hint Category |
Hardware Installation/Configuration, Adapter Cards, Hard Drives, Video, Input Devices, Audio, Diskette Drives | |
|
Date Created |
10-04-97 | |
|
Last Updated |
10-02-99 | |
|
Revision Date |
10-02-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2136 | |
|
Model |
all | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |