2.419 bytes

Service Hints & Tips

Document ID: MCGN-44PJBG

Netfinity 7000 M10 - On/Off switch cable detect not working

Applicable to: World-Wide

Source: RETAIN tip H165796

Abstract: ON/OFF switch cable detect not working.

SYMPTOM:
The system may not respond to ON/OFF, RESET, SCROLL or ENTER switches on the front panel and the system will NOT display any error. There are no cable detect codes installed in system.

PROBLEM ISOLATION AIDS:

• The system is a Netfinity 7000 M10 server, Type 8680, any model.
• The system's Diagnostics pass.

FIX:
No permanent fix available.

WORKAROUND:
If system control buttons, ON/OFF, RESET, SCROLL and ENTER are not working, lift the top cover of the system and make sure the ends of all of the above switches are connected to the back of the front panel through a set of cables. Make sure that this cable is seated firmly to the back of the front panel. If cables are attached and buttons still do not function, turn system off by removing AC chord and replugging AC, then restart.

SAS KEYWORDS:
PSY2, D/T8680, NETFINITY, UNCLASSIFIED

	Search Keywords	PSY2, D/T8680, NETFINITY, UNCLASSIFIED
	Document Category	Retain
	Date Created	01-02-99
	Last Updated	01-02-99
	Revision Date
	Brand	IBM PC Server
	Product Family	Netfinity 7000 M10
	Machine Type	8680
	Model
	TypeModel
	Retain Tip (if applicable)	H165796
	Reverse Doclinks and Admin Purposes	Date last altered: A98/10/21