9.905 bytes

Product Information

Document ID: VLAR-42HKMJ

ZIP 100MB IDE Internal Drive - Product Overview

Applicable to: World-Wide

• Product Publications page.

The IBM ZIP 100MB IDE Internal Drive:

• Provides the standard IDE configuration options of connection as a master or slave device
• Supports automatic configuration when installed in host systems provided with a Cable Select ATA interface cable
• Supports 16-bit data transfers, allowing high data transfer rates of up to 1.4MB/sec

The IBM ZIP 100MB IDE Internal Drive automatically certifies the removable data disk media during the formatting process by providing information such as:

• Specific disk configurations
• Diagnostic results
• Logical block information

The drive can be operated in either a horizontal or vertical position and can function in locations where space is at a premium, necessitating non-standard device orientation. It uses a power down sleep mode to reduce unnecessary electrical power drain. It can also be configured to function as the Drive A: diskette drive for the system, providing the capability for system boot up from the drive.

Warranty: 1 year limited Customer Carry-In Exchange

This product replaces:
None

This product was replaced by:
Not Applicable

Packaging:
One box containing...

• IBM ZIP 100MB IDE Internal Drive
• IDE 2 drop cable
• Accessory Kit
• IBM Tower Chassis Bezel
• IBM Desktop Chassis Bezel
• Publication Group

Marketing and FRU Part Numbers
World Wide...
Marketing part number -> 20L0544
FRU part number -> 28L1605

Additional Part Numbers
Part number(s) for ordering multiple quantities:
None

Associated FRU Part Number(s):
Asia Pacific, Canada, Latin America, United States: IDE Cable FRU part number-> 12J3432.
Asia Pacific, Canada, Latin America, United States: Tower Bezel FRU part number-> 12J4498.
Asia Pacific, Canada, Latin America, United States: Desktop Bezel FRU part number-> 03K8697.

Product Dates
World Wide...
Announce Date-> 8/24/1998
Planned Availability Date-> 10/02/1998
Withdrawal Date-> Not Applicable
Effective Withdrawal Date-> Not Applicable

Technical Specifications
Performance Specifications as known at time of announcement:
Average latency (average rotational delay): 10.2 msec

Data Rates:
Sustained: up to 11.2Mbits/sec
Burst: up to 88.9Mbits/sec

Seek time:
Minimum: 4 msec
Average: 29 msec
Maximum: 55 msec

Spindle Speed: 2942 rpm

Storage capacity: 100MB

Power Requirements:
5vdc +/- 5%

• Maximum Continuous: 800 mA rms
• Peak: 1.65 Amps
• Sleep: 0.07 Amps

• Maximum Continuous: 4.00 Watts
• Sleep: 0.35 Watts

Cartridge Insertion/Removal Cycles: 2 K minimum

Drive Insertion/Removal Cycles: 10 K minimum

Non-recoverable Errors: <10 in 10X13 bits

MTBF: 100 K hours

Service Life: 5 Years

Physical, Environmental, and Compatibility Specifications as known at time of announcement:
Weight: * lbs (* kg)
Height: 1.00 inches (25.4 mm)
Width: 3.99 inches (101.4 mm)
Depth: 6.44 inches (163.6 mm)

Operating Temperature:

• low of 10 degrees Celcius to a high of 51 degrees Celcius
• low of 50 degrees Farenheit to a high of 124 degrees Farenheit

Relative Operating Humidity: low of 20% to a high of 80% (non-condensing)

Agency Approvals:

• UL/cUL
• TUV
• CSA
• CE Mark
• C-Tick

ENERGY STAR-Compliant: *. The ENERGY STAR emblem does not represent EPA endorsement of any product or service.

Hardware Requirements for IBM systems:
The Zip 100MB IDE Internal Drive is supported on all models of the following IBM platforms: 6589, 6272, 6282, 6284, 6275, 6285, 6561, 6591, 6588, 6577, 6587, 6562, 6592, 6862, 6892

Hardware Requirements for Non-IBM systems:
No information available

Supported Operating Systems:

• OS/2 V3.x and V4.0
• Windows 3.1
• Windows 95
• Windows 98
• Windows NT V4.0

Limitations:
Operation as bootable drive A: is possible only when the following conditions pertain:

• Host must be operating under Windows 95 OSR2, or later
• Host must be operating under Windows NT 4.0 Service Pack 3, or later (Microsoft Hot Fix, Art. Q154094 must be applied for operation with Service Pack 3)

Additionally, the host BIOS must include specific Drive A support for the ZIP ATAPI drive. Contact the BIOS vendor for this information. Some configurations may not be compatible.

Supported Software: Not Applicable

Other: IBM has established that the Zip Tools, v.IM5600, packaged with the IBM Zip100 Drive is Year 2000 complaint. The tools that are available from IOMEGA are NOT Year 2000 Compliant. For this reason IBM recommends using the Tools provided with the Zip100 Option.

Document Note(s):

1. The symbol * is used to denote that the information is currently unavailable for this product.
2. All dates are represented in the US English format of mm/dd/yyyy (where mm=month, dd=day, yyyy=year).
3. FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
4. Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product can not be obtained directly from IBM.

	Search Keywords
	Document Category	Overview
	Date Created	23-11-98
	Last Updated	12-04-99
	Revision Date	12-04-2000
	Brand	IBM Options
	Product Family	Diskette/ZIP Drives
	Machine Type	Internal
	Model	20L0544
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes