|
3.705 bytes |
Service Hints & Tips |
Document ID: LWIK-3XVN9U |
TP 380Z - Considerations for OS/2 Warp
Applicable to: World-Wide
Below is a list of considerations for running OS/2 Warp on your ThinkPad
- Suspend/resume mode operation may cause a sound distortion while playing back an AVI file by the MediaPlayer under a WinOS/2 session. A SYS3175 error happens intermittently. If this symptom occurs, exit the WinOS/2 session and restart it.
- IBM 33.6 Host Processor Control modem cannot dial into a network server.
- Cannot setup a Xircom Credit Card Ethernet Adapter II PS.
- The following PC Cards do not work after resuming from suspend/hibernation mode under OS/2:
- Megahertz 33.6 Modem
- TDK 56K Modem
- When the system unit is connected to the Port Replicator with the Advanced EtherJet Feature and is attached to the LAN, the user cannot relogon after a suspend or hibernation operation because the system is disconnected from the network. The user needs to restart the system to logon again.
- CardBus PC and ZV cards are not supported.
- When installing OS/2 Warp Version 4.0 on a hard disk with more than 4.3 GB capacity, use the latest installation diskette available from the IBM Web site.
- Some modems' PC cards will not work after resuming from a suspend/hibernation operation mode.
- OS/2 Desktop screen position incorrectly shifts after the following operation.
- Virtual screen (panning) is enabled.
- Win-OS/2 full screen is open.
- Switch from LCD (800 x 600 w/ virtual screen) to external monitor using Fn+F7.
If you have this situation, please switch to the OS/2 Desktop screen, change the Win-OS/2 full screen to a Win-OS/2 window session and then switch to the external monitor again.
- General Protection fault error occurs when opening AmiPro without a printer setting under Win-OS/2 seamless session using 16M colors. If you have this situation, install a Win-OS/2 printer driver and reopen AmiPro.
- DOS full screen session does not change its display output, even after pressing FN+F7 to change displays (i.e. If a DOS full screen session was opened while on LCD only, after pressing FN+F7 to change display to CRT only, it will remain on the LCD).
- System hangs during installation of a WIN-OS/2 component (selective install) if video driver is aready installed.
|
|
Search Keywords |
|
|
Hint Category |
OS/2 |
|
|
Date Created |
31-08-98 |
|
|
Last Updated |
19-01-99 |
|
|
Revision Date |
19-01-2000 |
|
Brand |
IBM ThinkPad |
|
Product Family |
ThinkPad 380Z |
|
|
Machine Type |
2635, 2636 |
|
|
Model |
Various |
|
|
TypeModel |
|
|
|
Retain Tip (if applicable) |
|
|
|
Reverse Doclinks
and Admin Purposes |
|