2.678 bytes |
Service Hints & Tips |
Document ID: DDSE-3QPJ4F |
Netfinity3500 - Onboard ethernet controller RIPL does not abort
Applicable to: World-Wide
Onboard Ethernet Controller RIPL Does Not Abort
Symptom:
Pressing the <HOME> key to "Abort RIPL" (Remote Initial Program Load), does not abort the RIPL.
Problem Isolation Aids:
- The system is an IBM Netfinity 3500 (8644-1xx/2xx/3xx)
- The Onboard Ethernet Controller is NOT connected to the LAN, or the connection is faulty.
Fix:
Connect the Onboard Ethernet Controller Port to the LAN.
If a there is a good LAN connection, the "Abort RIPL" works and the next device in the Startup Sequence is tried.
But if the cable is disconnected or faulty, the system waits indefinitely until a valid LAN connection is detected before continuing to RIPL.
SAS Keywords:
PSY2, D/T8644, D/T8644RPL, ETHERNET, D/T8644CONN, NETFINITY, 3500, UNCLASSIFIED, RPL
Search Keywords |
PSY2, D/T8644, D/T8644RPL, ETHERNET, D/T8644CONN, NETFINITY, 3500, UNCLASSIFIED, RPL | |
Hint Category |
Retain | |
Date Created |
13-01-98 | |
Last Updated |
14-05-98 | |
Revision Date |
13-05-99 | |
Brand |
IBM PC Server | |
Product Family |
Netfinity 3500 | |
Machine Type |
8644 | |
Model |
10U; 10X; 20U; 20X; 21U; 21X; 30U; 30X | |
TypeModel |
| |
Retain Tip (if applicable) |
H162378 | |
Reverse Doclinks |