|
2.194 bytes |
Service Hints & Tips |
Document ID: SSCT-3JNBZV |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
Cross Brand - Getting Into Setup on AT&T Paradyne terminal (IBM P/N20H8212)
Applicable to: United States
Service Information:
The IBM P/N 20H8212 is an AT&T Paradyne terminal that has a special EPROM for NTW. The terminal must be configured prior to placing it in service.
Turn on the unit, holding down the Shift and Print Screen keys. This puts you into setup mode. Press Enter to tab forward. Press C for Communication and P for Printer setup. Use the up or down arrow to go to the next parameter and use the left and right arrows to change the parameter. If you press the Escape key, the terminal will be set to the original default parameters. After the changes have been made, go to the main menu and save it.
SAS KEYWORDS:
1342 SET UP CONFIG CONFIGURATION
|
Search Keywords |
Non IBM | |
|
Hint Category |
Configuration | |
|
Date Created |
21-06-96 | |
|
Last Updated |
04-01-99 | |
|
Revision Date |
04-01-2000 | |
|
Brand |
Cross Brand | |
|
Product Family |
Various | |
|
Machine Type |
| |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H016144 | |
|
Reverse Doclinks |