3.113 bytes

Service Hints & Tips

Document ID: DETR-3UFPF2

PS/1 - Can I restore one of the preloaded programs to my 2133, 2155, or 2141?

Applicable to: United States

* This article does not apply to those PS/1 systems with OS/2 pre-installed!

If you have created a Recovery diskette, then you may easily restore all of your "preloaded" programs to your hard disk. For complete instructions, please see the question "How can I restore my original PS/1 software to my 2133, 2155, or 2141?" To restore a specific directory, please follow these steps:

(NOTE: This will not work if you have selected ERASE from the PS/1 Fitness program.)

1) Exit Windows and select the DOS Prompt option.

2) Type: CD\RECOVERY and press [Enter].

3) Type:

PKUNZIP -O -D *.ZIP (dir)\*.* C:\(dir) and press [Enter].

(dir) represents the program directory you wish to restore. For example, if you need to restore Microsoft Windows, then you would type the following:

PKUNZIP -O -D *.ZIP WINDOWS\*.*

C:\WINDOWS and press [Enter].


For PS/1 units that were pre-installed with Dos 6.x, you can use PS1UNZIP (drive letter)\ (directory)\ filename
Ex: PS1UNZIP C:\WINDOWS\SYSTEM.INI
" *.* " = Can be used for all files in a given directory.


**NOTE: This command should be entered on one line.

Search Keywords

Hint Category

Software Installation/Configuration

Date Created

23-04-96

Last Updated

14-12-98

Revision Date

14-04-99

Brand

IBM Aptiva

Product Family

PS/1

Machine Type

2133, 2155

Model

11E; 13T; 14C; 16E; 17A; 18A; 18T; 19C; 21C; 23C; 28A; 46M; 51D; D50; G11; G13; G43; G46; G49; G50; G53; M40; M46; P11; P13; P43; P50; P53; R04; R05; R06; R09; R38; R42; R43; R44; R84; R86; R87; RO3; S11; S13; S43; S45; S47; S48; S50; S53; W11; W13; W42; W43; W45; W50; W53; 20E; 22T; 24C; 24M; 28V; 39E; 41T; 43C; 45V; 48E; 50T; 52C; 55V; 72E; 74T; 76C; 78C; 79C; 81A; 82E; 84T; 86C; 87C; CC1; D53; G14; G44; G52; G54; G72; G76; G78; G82; NM1; P14; P44; P57; P71; P74; P76; P78; P84; R14; R15; R16; R17; R18; R51; R52; R57; R58; R62; R63; R67; R71; R89; R93; R96; R97; S14; S44; S54; S70; S75; S76; S78; S80; W14; W44; W48; W54; W67; W76; W77; W78; Z33

TypeModel

Retain Tip (if applicable)

Reverse Doclinks
and Admin Purposes