|
1.554 bytes |
Service Hints & Tips |
Document ID: GSMH-3FBLZ3 |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
IBM PS/2 - Voltage Selector Switch
Applicable to: EMEA
Service Information:
To prevent accidental switching to 115V and subsequent possible damage. A grey plastic label has been fitted over the selector switch at assembly stage. If it is necessary to change the setting to 115V, use the following procedure.
Unlock the system unit cover, loosen the two cover securing screws and pull the cover forward and upward to remove it. The rear plastic panel may now be removed by pushing against its retaining clips and pulling the panel away from the unit. Once the rear plastic cover has been removed it is possible to peel back the label and change the setting.
SAS KEYWORDS:
D/T9577 D/T9557 PSY2 9577PWR
9557PWR PSY2PART 9577PART 9557PART
|
Search Keywords |
| |
|
Hint Category |
Retain, Power | |
|
Date Created |
08-04-94 | |
|
Last Updated |
01-05-98 | |
|
Revision Date |
30-04-99 | |
|
Brand |
IBM PC | |
|
Product Family |
PS/2 | |
|
Machine Type |
9557, 9577 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H045288 | |
|
Reverse Doclinks |