|
5.093 bytes |
Parts Information |
Document ID: DDSE-42ZRD8 |
PC Server 300 - Pentium System Board Jumper Settings
Applicable to: World-Wide
Jumper Settings (Pentium System Board)
A label (diagram) showing the following jumper locations is located on the top of the base frame assembly inside the system unit.
Parity Check Selections
Jumper Configuration Setting
J1 Pentium parity check enabled Installed
(Default)
Pentium parity check disabled Not installed
DRQ Selection
Jumper Configuration Setting
W14 DRQ6 Pins 1-2
DRQ7 Pins 2-3
Secondary Cache Selection
Jumper Configuration Setting
J40 5 volts for the Installed:
Pentium Jumper blocks
(all pins)
5.3 volts for the Installed:
Pentium Power module
J41 5.3 volts for ground Installed:
Power module
(ground)
J42 5.3 volts for ground Installed:
Power module
(ground)
Default Settings
Jumper Default Setting
J3 Pins 2-3
J4 Pins 1-2
J35 Pins 1-2
Cache Selections
Jumper Configuration Setting
J2 Pentium write-through cache Installed
Pentium write-back cache (Default) Not installed
DACK Selection
Jumper Configuration Setting
W16 DACK6 Pins 1-2
DACK7 Pins 2-3
Keyboard Selection
Jumper Configuration Setting
W6 PS/2 Mouse installed (Default) Installed
PS/2 Mouse not installed Not installed
Clock Selection
Jumper Configuration Setting
J5 66MHz clock speed (Default) Installed
50MHz clock speed Not installed
Pentium Clock Selection
Jumper Configuration Setting
J6 Oscillator for U15 (Default) Pins 1-2
Clock synthesizer Pins 2-3
BIOS Mode Selection
Jumper Configuration Setting
W2 BIOS in boot recovery mode Pins 1-2
BIOS in normal mode (Default) Pins 2-3
Secondary Cache Selection
Configuration J3 J4 J35
No secondary cache Pins 1-2 Pins 1-2 -
Reserved Pins 1-2 Pins 2-3 -
256KB secondary Pins 2-3 Pins 1-2 Pins 1-2
cache
512KB secondary Pins 2-3 Pins 2-3 Pins 2-3
cache
W17 IRQ Selection
Selection Setting
Redirect modified PCI interrupt to IRQ 5 Pins 1-2
Redirect modified PCI interrupt to IRQ 9 Pins 3-4
Redirect modified PCI interrupt to IRQ 10 Pins 5-6
Redirect modified PCI interrupt to IRQ 11 Pins 7-8
Redirect modified PCI interrupt to IRQ 15 Pins 9-10
Redirect modified PCI interrupt to IRQ 14 Pins 11-12
Reserved Jumpers
Jumper Setting
W20 Pins 2-3
J5 Installed
J6 Pins 1-2
|
Search Keywords |
| |
|
Document Category |
System Boards | |
|
Date Created |
09-12-98 | |
|
Last Updated |
09-12-98 | |
|
Revision Date |
09-12-99 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 300 | |
|
Machine Type |
8640 | |
|
Model |
ALL | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |