TP 340 - Numeric Error Codes

5.473 bytes

Service Hints & Tips

Document ID: GSMH-3BUEN9

TP 340 - Numeric Error Codes

Applicable to: World-Wide

Numeric Error Codes:

Symptom/Error

FRU/Action

10X

1. System Board

110

1. Go to ¿Memory Checkout—.
2. IC DRAM Card
3. System Board

111

1. Go to ¿Memory Checkout—.
2. System Board

161

1. Go to ¿Checking the Backup Battery—.
2. Backup Battery
3. System Board

163
(Time and Date was not set.)

1. Set Time and Date.
2. System Board

173
(Configuration data were lost.)

1. Select OK in the error screen; then set time and date.
2. Backup Battery
3. System Board

174
(Perform ¿Checking the Installed Devices List— on page 21 before changing any FRUs.)

1. Check Device Configuration.
2. System Board
3. Diskette Drive Assembly
4. Hard Disk Drive Assembly

184
(POP check sum error.)

1. Reset the POP in Easy-Setup.

190
(A depleted battery pack was installed when the power was on.)

1. Go to ¿Checking the Battery Pack—.

191XX

1. System Board

199XX

1. System Board

1XX

1. System Board

2XX

1. Go to ¿Memory Checkout—.
2. IC DRAM Card
3. System Board

301, 303, 304, 305, 3XX

1. Go to ¿Keyboard/Auxiliary Input Device Checkout—.
2. Keyboard
3. External Numeric Keypad
4. External Keyboard
5. Keyboard/Mouse Cable
6. System Board

601, 6XX

1. Go to ¿Diskette Drive Test—.
2. Diskette Drive Assembly
3. Diskette
4. System Board

602
(Diskette read error.)

1. Go to ¿Diskette Drive Test—.
2. Diskette
3. Diskette Drive Assembly

604
(Non-acceptable ID was read from the diskette drive.)

1. Go to ¿Diskette Drive Test—.
2. Diskette Drive Assembly
3. System Board

11XX

1. Serial Device (First)
2. Communication Cable
3. System Board

12XX

1. Serial Device (Second)
2. Communication Cable
3. System Board

17XX

1. Hard Disk Drive
2. System Board

24XX

1. System Board

808X

1. PCMCIA Slot Assembly
2. PCMCIA Device
3. System Board

860X
(Pointing device error when TrackPoint II or III is disabled.)

1. External Mouse
2. External Keyboard
3. System Board

861X
(Pointing device error when TrackPoint II or III is enabled.)

1. Reseat the keyboard TrackPoint II or III cable. (See ¿1080 Keyboard Unit—.)
2. Keyboard
3. External Mouse
4. System Board

I9990301
I9990302
I9990305

1. Reseat the boot device.
2. Check the startup sequence for the correct boot device.
3. Check that the operating system has no failures, and is installed correctly.

I9990303

1. System Board

Other codes not listed above

1. Go to ¿Undetermined Problems—.

Search Keywords

Hint Category

Hardware Maintenance Information

Date Created

28-11-96

Last Updated

06-04-98

Revision Date

03-04-99

Brand

IBM ThinkPad

Product Family

ThinkPad 340

Machine Type

2610

Model

Various

TypeModel

Retain Tip (if applicable)

N/A

Reverse Doclinks
and Admin Purposes

Symptom/Error	FRU/Action
10X	1. System Board
110	1. Go to ¿Memory Checkout—. 2. IC DRAM Card 3. System Board
111	1. Go to ¿Memory Checkout—. 2. System Board
161	1. Go to ¿Checking the Backup Battery—. 2. Backup Battery 3. System Board
163 (Time and Date was not set.)	1. Set Time and Date. 2. System Board
173 (Configuration data were lost.)	1. Select OK in the error screen; then set time and date. 2. Backup Battery 3. System Board
174 (Perform ¿Checking the Installed Devices List— on page 21 before changing any FRUs.)	1. Check Device Configuration. 2. System Board 3. Diskette Drive Assembly 4. Hard Disk Drive Assembly
184 (POP check sum error.)	1. Reset the POP in Easy-Setup.
190 (A depleted battery pack was installed when the power was on.)	1. Go to ¿Checking the Battery Pack—.
191XX	1. System Board
199XX	1. System Board
1XX	1. System Board
2XX	1. Go to ¿Memory Checkout—. 2. IC DRAM Card 3. System Board
301, 303, 304, 305, 3XX	1. Go to ¿Keyboard/Auxiliary Input Device Checkout—. 2. Keyboard 3. External Numeric Keypad 4. External Keyboard 5. Keyboard/Mouse Cable 6. System Board
601, 6XX	1. Go to ¿Diskette Drive Test—. 2. Diskette Drive Assembly 3. Diskette 4. System Board
602 (Diskette read error.)	1. Go to ¿Diskette Drive Test—. 2. Diskette 3. Diskette Drive Assembly
604 (Non-acceptable ID was read from the diskette drive.)	1. Go to ¿Diskette Drive Test—. 2. Diskette Drive Assembly 3. System Board
11XX	1. Serial Device (First) 2. Communication Cable 3. System Board
12XX	1. Serial Device (Second) 2. Communication Cable 3. System Board
17XX	1. Hard Disk Drive 2. System Board
24XX	1. System Board
808X	1. PCMCIA Slot Assembly 2. PCMCIA Device 3. System Board
860X (Pointing device error when TrackPoint II or III is disabled.)	1. External Mouse 2. External Keyboard 3. System Board
861X (Pointing device error when TrackPoint II or III is enabled.)	1. Reseat the keyboard TrackPoint II or III cable. (See ¿1080 Keyboard Unit—.) 2. Keyboard 3. External Mouse 4. System Board
I9990301 I9990302 I9990305	1. Reseat the boot device. 2. Check the startup sequence for the correct boot device. 3. Check that the operating system has no failures, and is installed correctly.
I9990303	1. System Board
Other codes not listed above	1. Go to ¿Undetermined Problems—.

	Search Keywords
	Hint Category	Hardware Maintenance Information
	Date Created	28-11-96
	Last Updated	06-04-98
	Revision Date	03-04-99
	Brand	IBM ThinkPad
	Product Family	ThinkPad 340
	Machine Type	2610
	Model	Various
	TypeModel
	Retain Tip (if applicable)	N/A
	Reverse Doclinks and Admin Purposes