|
1.926 bytes |
Parts Information |
Document ID: DDSE-44RNTJ |
Servers - IDE Controllers
Applicable to: World-Wide
IDE Controllers
|
Note: |
Some severs have an IDE controller on the system board. You can connect two drives to the IDE controller on non-disk-array models, and one drive to the IDE controller on disk-array models. If you plan to do this, you must purchase an IDE cable.
The IDE controller is for low-speed devices, such as tape drives, but you can connect hard disk drives. When you connect two drives to the IDE controller, one drive is the primary (master), and the other is the secondary or alternate (subordinate). To set the jumpers to the secondary mode, follow the instructions in the documentation supplied with the drives.
|
Search Keywords |
| |
|
Document Category |
Controllers | |
|
Date Created |
03-02-99 | |
|
Last Updated |
03-02-99 | |
|
Revision Date |
03-02-2000 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 300, PC Server 310, PC Server 320, PC Server 500, PC Server 520, PC Server 720, Rack/Storage Enclosures | |
|
Machine Type |
8640, 8639, 8641, 8642, 3517, 3518 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |