6.860 bytes

Service Hints & Tips

Document ID: PMYS-3LYJYA

This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose.

Aptiva - 2140/2142 MKE (Panasonic) 24X max CD-ROM specifications

Applicable to: World-Wide

Overview of Building Block
24X Max CD-ROM
P/N: 12J3524 FRU P/N: 12J3525
Source: MKE (Panasonic)

Specification Compatibility
IDE/ATAPI Conforms to SFF-8020i and SFF-8070i

Feature Specifics
MKE Model CR-585-B

Support is provided for the following formats:
CD-Audio
CD-ROM (Mode 1 and Mode 2)
CD-ROM XA (Mode 2 form 1 and form 2)
CD-I (Mode 2 form 1 and form 2)
CD-I Ready
CD-I Bridge
Photo CD (single and multiple sessions)
CD-WO (fixed and variable packets)
Video CD
Enhanced Music CD
CD Plus
CD-E
CD-R Type 2

Performance Characteristics:
Transfer Rate: 24X Maximum (Full CAV varies from 10X at the CD hub to 24X at the CD edge or 1,500 KB/sec to 3,600 KB/sec)

Access Time: Less than 90 ms

Data Capacity: 656 MB (Mode 1) and 748 MB (Mode 2)

Burst Rate:
11.1 MB/sec (PIO Mode 3 w/o IORDY)
8.33 MB/sec (Single Word DMA Mode 1)
13.3 MB/sec (Multi Word DMA Mode 2)

Spin Up Time: 7.0 sec typical

Drive Reliability Features:
Nonrecoverable errors: Less than 1 error in 10**12 bits

Mean Time Between Failures: 125,000 POH

Mean Time to Repair: 0.5 hours

Service Life: 5 years

Drive Insertion/Removal Cycles (multiple disks): 30,000 minimum

Environmental Limits:

	Operating	Storage (6 months)
Temperature:	5 to 50 C	-30 to 65 C
Relative Humidity (non-c)	5% to 90%	5% to 95%
Max Temperature Gradient	12 deg C / hour	-
Altitude	10,000 feet	-
Shock	10 G, 1/2 sine wave for 11 ms	10 G, 1/2 sine wave for 11 ms

Electrical Power Requirements:
+5 VDC +/-5% Max continuous: 550 mA Peak: 1300 mA

+5 VDC Maximum Ripple: 100 mV P-P

Physical Characteristics:
Height: 41.3 mm
Width: 146.0 mm
Length: 190.0 mm
Weight: 1.95 lbs

ATAPI Interface Channels:
NOTE: Aptiva Intrepid/Defiant Models with Zip ships with the HDD as the MASTER on the PRIMARY channel and the ZIP as SLAVE on the SECONDARY channel. The CD-ROM is a MASTER on the SECONDARY channel.

-The MASTER drive on the PRIMARY must be the boot drive, Drive C.
-If the Zip is to be the PRIMARY boot drive for the computer (Drive C) it must be configured as the MASTER on the PRIMARY channel.
-When configured as a MASTER drive the Zip drive will support either a second Zip ATA or ATAPI drive installed in the SLAVE configuration or an ATA hard drive configured as a SLAVE.
-When configured as a SLAVE drive, ZIP must be daisy-chained to a MASTER drive.

Jumper Settings: (When viewed from the rear of the CD-ROM Drive, also reference label on drive) To view expanded document on jumper settings, click here .

Drive 0 Select (MASTER)            Drive 1 Select (SLAVE)       Cable Select (AUTO)





         o   o   o                                            o   o   o                                        o   o   o

                    |                                                   |                                              |

         o   o   o                                            o   o   o                                        o   o   o

	Search Keywords
	Hint Category	CD-ROM Drives, Technical Specifications
	Date Created	16-09-97
	Last Updated	22-01-99
	Revision Date	11-01-2000
	Brand	IBM Aptiva
	Product Family	Aptiva
	Machine Type	2140, 2142
	Model	All
	TypeModel
	Retain Tip (if applicable)
	Reverse Doclinks and Admin Purposes