5.014 bytes |
Service Hints & Tips |
Document ID: YAST-3GPT2B |
HPC V.34 Modems - General frequently asked questions
Applicable to: World-Wide
Question:
What is the HPC V.34 modem?
Answer:
The "Host Processor Controlled" modem is a Modem driven by the Host CPU over one ASIC chip. It mainly lowers cost and is software upgradable. So, essentially the modem is all software.
Question:
What kind of computer can use the HPC modem?
Answer:
This modem is supported on systems with Pentium 90MHz or faster CPUs.
Question:
What Operating Systems does IBM support with this modem?
Answer:
Only Windows 3.11 & Windows 95 ( Windows NT IS NOT Supported).
Question:
What drivers does the HPC install in Windows 3.11?
Answer:
Mainly it installs drivers in the system.ini:
comm.drv=C:\HPC\comm.drv
device=C:\HPC\vmodem.386
device=C:\HPC\vpctcom.386
device=C:\HPC\vvoice.386
Question:
Under Windows 3.11 what determines the COM port of the HPC modem?
Answer:
It is much like a PCMCIA modem, it takes the next available COM port. A program located in the c:\windows directory controls this aspect of configuration.
Question:
Under Windows 3.11, how does it store or know what IRQ the modem is on?
Answer:
Normally you would use the config utility in the HPC group.
However, in the system.ini you will find a statement in the [386enh] section:
PCTELIRQ=3
Question:
How do you install it under Windows 95?
Answer:
You must install the special HPC communications port first. This is the key to installation.
1. Go to Add new Hardware (do not let Windows 95 search your Hardware.)
2. In the Hardware type menu select "ports (com & lpt)".
3. Then click on "Have Disk".
4. Then point it to the ISA HPC modem diskette.
5. Win 95 will assign I/O and other resources..
6. Then click next and then finish.
Then for the modem it is basically the same thing except that you select modems in the Hardware type menu.
Question:
What does the virtual COM driver need to be set at?
Answer:
In order to function properly under Windows 3.11, the virtual COM driver needs to be set to default:
device=*vcd.
Search Keywords |
| |
Hint Category |
General Information | |
Date Created |
02-05-97 | |
Last Updated |
18-03-99 | |
Revision Date |
18-03-2000 | |
Brand |
IBM Options | |
Product Family |
Modems | |
Machine Type |
33.6K | |
Model |
42H4335 | |
TypeModel |
| |
Retain Tip (if applicable) |
| |
Reverse Doclinks |