2.764 bytes |
Service Hints & Tips |
Document ID: MCGN-3YLKJE |
Netfinity 7000 M10 - BIOS reports incorrect processor speed
Applicable to: World-Wide
Source: RETAIN tip H164724
SYMPTOM:
BIOS displays a processor speed different from what is expected.
PROBLEM ISOLATION AIDS:
- The system is a Netfinity 7000 M10 server, Type 8680, all models.
- The system has a processor whose speed is different than what is reported by BIOS.
FIX:
Reference the white print on the Processor Board near the Processor Speed jumpers, or directions below.
- 400 MHz:
Pins 1-2 on J44, J45 and J46.
Pins 2-3 on J43.
- 450 MHz:
Pins 1-2 on J44 and J46.
Pins 2-3 on J43 and J45.
DETAILS:
On page 146 of the "Hardware Information Book", the jumper settings for processor speeds are incorrect. BIOS will display a processor speed different than from what is expected if the directions on page 146 are used to set the processor speed jumpers.
SAS KEYWORDS:
PSY2, D/T8680, UNCLASSIFIED, PROCESSOR, SPEED, JUMPER, SETTINGS, BIOS, INCORRECT, CORRECTION, PUBLICATION, ERROR, HARDWARE, INFORMATION, BOOK, MANUAL, 8680DOC, DOCUMENTATION, H164724
Search Keywords |
| |
Hint Category |
BIOS, Processors, Retain | |
Date Created |
23-09-98 | |
Last Updated |
19-01-99 | |
Revision Date |
19-01-2000 | |
Brand |
IBM PC Server | |
Product Family |
Netfinity 7000 M10 | |
Machine Type |
8680 | |
Model |
ALL | |
TypeModel |
| |
Retain Tip (if applicable) |
H164724 | |
Reverse Doclinks |
Date last altered: A98/09/17 |