|
10.656 bytes |
Service Hints & Tips |
Document ID: RMIE-3BRGVU |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
TP 360 - ECA002 LCD hinge and cover replacement - Expired
Applicable to: AP-N, AP-S, Canada, LA, United States
|
Record number: |
H135337 |
Service code: |
33 |
|
Device: |
D/T2620 |
Parts source: |
LOC |
|
ECA number: |
ECA002 |
Publish Flag: |
R |
|
EC number: |
ECE67321 |
Hit count: |
UHC00234 |
|
Mandatory: |
N |
Success count: |
USC003 |
|
Automatic shipment: |
N |
Publication code: |
PC40 |
|
Availability date: |
96/11 |
Date created: |
O96/11/20 |
|
Plant of control: |
24 |
Date last altered: |
A97/11/20 |
|
Tip key: |
|
Owning B.U.: |
USA |
Abstract:
2620 MOD 360 LCD Hinge and cover Replacement ECA.
Purpose :
To correct LCD cover damage caused by loose hinge screws install the new FRU components listed in the detail area of this ECA.
Features :
|
Type, Model, Stage |
With B/M |
Machines Affected and/or |
B/M to be |
Service Hours |
System Hours |
|
2620 |
B/M9999999 |
All models |
B/M9999999 |
00.7 |
00.5 |
Physical Check :
Any 2620 360C, CS, CE, and CSE with cracks or breaks in or near the hinge area of the LCD cover.
OR
Any 2620 360C, CS, CE, and CSE with hinge screws that are not tightly seated or are loose within the LCD unit.
Detail :
This is a no cost ECA that will be applied to systems identified in the FEATURES and PHYSICAL CHECK sections.
A small percentage of 2620 systems have been reported to have LCD cover stress cracks or breakage in the hinge area. It has been determined that this is caused by loose hinge screws. New level FRUs, listed below, have been released to correct this condition.
An installation instruction sheet is included in the Hinge Kits.
Note: In order to make these parts available quickly it was necessary to release the ECA without the instruction sheet in the initial shipment of Hinge Kits. This exception only relates to a small number of kits.
Note: There are 2 6mm screws and 2 4mm screws that hold the hinge to the back of the LCD rear cover. Replace the 6mm screws with coated 6mm screws (P/N in chart).
The 2 4mm brass screws that are removed from the hinge area of the LCD back cover should be coated with Loctite before they are reinstalled in the new cover (P/N in chart).
The 2 other screws holding the LCD to the cover and the 1 screw holding the card to the cover should be tightened if loose. Do not use Loctite on these screws.
Important :
The following FRU numbers in the far right column can be used until the FRU kits are available.
Required ECA Material
|
Description |
FRU P/N |
Quantity neede for each ECA TFT LCD |
Seperate FRU components of DSTN LCD |
The Kits |
|
TFT Hinge Kit |
P/N 11J9524 |
1 |
|
P/N 84G5661 P/N 84G5662 |
|
DSTN Hinge Kit |
P/N 11J9522 |
|
1 |
P/N 66G2205 P/N 66G2206 |
|
2.5 x 6mm adhesive screw |
P/N 11J9527 |
2 |
2 |
P/N 66G5124. Screw Kit. Use with locite. |
|
TFT LCD Rear Cover |
P/N 11J9525 |
1 |
|
P/N 84G5654. Must transfer old logo. |
|
DSTN LCD Rear Cover |
P/N 11J9523 |
|
1 |
P/N 84G5865. Must transfer old logo. |
|
Loctite 290 |
P/N 0216348 |
1 |
1 |
|
Notes :
THIS ECA EXPIRES NOVEMBER-22-1998
Order all FRU parts locally and record Time and Material to service code 33, ECA 002, and OTHER OFFICE 990.
|
Search Keywords |
| |
|
Hint Category |
ECA, Display/Monitor | |
|
Date Created |
25-11-96 | |
|
Last Updated |
12-04-99 | |
|
Revision Date |
12-04-2000 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 360 | |
|
Machine Type |
2620 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H135337 | |
|
Reverse Doclinks |
3HSBKW |