7.439 bytes |
Service Hints & Tips |
Document ID: LWIK-3RVMGT |
TP 560/E - Hardware resource assignments
Applicable to: World-Wide
The figure below shows the memory map for a correctly functioning system. Memory can be mapped differently if POST detects an error in system board memory or TR/CMOS RAM. In the figure, the variable x represents the number of 1-MB blocks of system board memory starting at or above the hex 100000 boundary.
Hex Address Range |
Function |
00000000 to 0009FFFF |
640-KB system board RAM |
000A0000 to 000BFFFF |
Video RAM |
000C0000 to 000C7FFF |
System board video BIOS mapped to RAM |
000C8000 to 000EFFFF |
Channel ROM |
000F0000 too 000FFFFF |
64-KB system board ROM mapped to RAM |
00100000 to (00100000 + x MB) |
x MB system board RAM |
FFFF0000 to FFFFFFFF |
64-KB system board ROM (same as 000F0000 to 000FFFFF) |
The following table summarizes the available system resources for the computer and expansion units. Values in parentheses are alternative values that are selectable in the ThinkPad Configuration program or application programs. The default values are highlighted.
System Resources |
IRQ |
I/O Address |
Memory Address |
DMA |
Timer |
0 |
0040-0043 |
none |
none |
Keyboard |
1 |
0060 and 0064 |
none |
none |
Serial Port |
4 |
03F8-03FF |
none |
none |
Parallel Port |
7 |
03BC-03BE (and 07BC-07BE) |
none |
0,1,3 or disabled |
Infrared Port |
3, 4 or disabled |
02F8-02FF,03F8-03FF, 02E8-02EF, or 03E8-03EF |
none | |
Diskette Controller |
6 |
03F0-03F7 |
none |
2 |
Video Controller |
none |
03BA,03B4-03B5, |
A0000-BFFFF and C0000-C7FFF |
none |
ESS AudioDrive device |
5, 7, 10, 11 |
0220-022F or 0240-024F |
none |
1 or 0 |
ESS AudioDrive (FM synthesizer |
none |
388-38B |
none |
none |
PCMCIA Controller |
none |
03E0-03E1 |
none |
none |
Real time clock |
8 |
0070-0071 |
none |
none |
TrackPoint III or mouse |
12 |
00600 and 0064 |
none |
none |
Math coprocessor exception |
13 |
none |
none |
none |
Notes:
Addresses in the parentheses are also used when Extended Capability Port (ECP) is enabled by the ThinkPad Configuration program as the printer operating mode.
When you enable ECP as the printer operating mode by the ThinkPad Configuration program, one of the choices (including "disabled") must be selected.
Search Keywords |
| |
Hint Category |
Configuration | |
Date Created |
20-02-98 | |
Last Updated |
28-05-98 | |
Revision Date |
27-05-99 | |
Brand |
IBM ThinkPad | |
Product Family |
ThinkPad 560, ThinkPad 560E | |
Machine Type |
2640 | |
Model |
Various | |
TypeModel |
| |
Retain Tip (if applicable) |
| |
Reverse Doclinks |