|
1.726 bytes |
Service Hints & Tips |
Document ID: JBAR-438MW3 |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
IBM IntelliStation/IBM PC - IBM 56Kbps ISA modem (P/N 01K1217) will not fit into ISA slot
Applicable to: World-Wide
PROBLEM:
Protruding loops on the chassis and above and below each slot on some machines prevent the modem cable brackets from fitting properly against the chassis.
PERMANENT SOLUTION:
Parts exchange the modem.
EXPLANATION:
A certain number of 6561, 6591, 6862, 6892, and 6893 systems were designed with loop-shaped protrusions near the adapter slots which are intended to provide extra support for installed adapters. The gap between the loops is about 20 mm. A certain number of 56Kbs ISA PnP modems were designed with gray plastic DAA covers that are thicker than 20 mm (21-25 mm) and will not properly fit in machines with these belt loops.
FRU stock has been reworked to eliminate the thick DAA covers.
|
Search Keywords |
| |
|
Document Category |
Adapter Cards, Riser Cards | |
|
Date Created |
16-12-98 | |
|
Last Updated |
16-12-98 | |
|
Revision Date |
| |
|
Brand |
IBM IntelliStation, IBM PC | |
|
Product Family |
E Pro, PC 300GL, PC 300PL | |
|
Machine Type |
6893, 6561, 6591, 6862, 6892 | |
|
Model |
all | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |