|
5.713 bytes |
Service Hints & Tips |
Document ID: RMIE-3BDD2N |
TP 755CE/CSE/CV/CX - Using the IBM PCMCIA 4X CD-ROM drive to install Warp 4.0
Applicable to: World-Wide
To install Warp 4.0 using the IBM PCMCIA 4X CD-ROM drive follow these instructions:
1.) Made a Diskcopy of Warp 4.0 Diskette 1
2.) Deleted the following files from copy of diskette 1:
SONYCDS1.FLT
SONY535.ADD
SONY31A.ADD
3.) This frees up space to copy over the required drivers:(Disk 1) (From the Pcmcia diskette for this machine or from Warp v3.0)
PCMCIA.SYS 2-16-95 47,622
IBM2SS01.SYS 12-01-94 15,890
CD400ROM.ADD 1-24-95 22,246
Copy CD400CRD.SYS to Disk #2
4.) Then edited the Config.sys on disk 1 to remark out the following lines only:
BASEDEV=SONYCDS1.FLT
BASEDEV=SONY535.ADD
BASEDEV=SONY31A.ADD
5.) Then add the following lines to the end of the config.sys file on disk #1:
BASEDEV=PCMCIA.SYS /P
BASEDEV=IBM2SS01.SYS /S0=2
BASEDEV=CD400ROM.ADD
DEVICE=\CD400CRD.SYS
Here is a copy of the config.sys after all the alterations:
buffers=32
iopl=yes
memman=swap,delayswap
protshell=sysinst1.exe
set os2_shell=sysinst2.exe
diskcache=D2,LW
protectonly=yes
libpath=.;\;\os2\dll;\os2\install;
ifs=hpfs.ifs /c:64
pauseonerror=no
codepage=850
devinfo=kbd,us,keyboard.dcp
devinfo=scr,ega,vtbl850.dcp
device=\dos.sys
device=\mouse.sys
set path=\;\os2;\os2\system;\os2\install
set dpath=\;\os2;\os2\system;\os2\install
set keys=on
basedev=ibmkbd.sys
basedev=ibm1flpy.add
basedev=ibm1s506.add
basedev=ibm2flpy.add
basedev=ibm2adsk.add
basedev=ibm2scsi.add
basedev=ibmint13.i13
basedev=os2dasd.dmd
device=\testcfg.sys
basedev=xdfloppy.flt
set os2_shell=cdinst.exe
set saveconnect=1
set cdrominst=1
ifs=cdfs.ifs /q
basedev=aha152x.add
basedev=aha154x.add
basedev=aha164x.add
basedev=aha174x.add
basedev=aic7770.add
basedev=aic7870.add
basedev=btscsi.add
basedev=fd16-700.add
basedev=fd8xx.add
basedev=fd7000ex.add
basedev=dpt20xx.add
basedev=dac960.add
basedev=flashpt.add
basedev=ipsraid.add
basedev=ql10os2.add
basedev=ql40os2.add
basedev=ql510.add
basedev=chincds1.flt
basedev=hitcds1.flt
basedev=neccds1.flt
rem dev=sonycds1.flt ********This line was remmed by tech support********
basedev=toshcds1.flt
basedev=ibmidecd.flt
basedev=tmv1scsi.add
rem dev=sony535.add *********This line was remmed by tech support********
basedev=lms206.add
rem 154569 basedev=lms205.add
basedev=mitfx001.add
basedev=sbcd2.add
rem dev=sony31a.add ********This line was remmed by tech support*********
device=\os2cdrom.dmd
set os2_shell=cdboot.exe
set oemprogram=\ibminst\npconfig.exe
set exitwhendone=1
BASEDEV=PCMCIA.SYS /P
BASEDEV=IBM2SS01.SYS /S0=2
BASEDEV=CD400ROM.ADD
DEVICE=\CD400CRD.SYS
|
Search Keywords |
| |
|
Hint Category |
CD-ROM Drives, OS/2, PCMCIA (PC Card) | |
|
Date Created |
13-11-96 | |
|
Last Updated |
22-01-99 | |
|
Revision Date |
09-06-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 755CE/CSE, ThinkPad 755CX, ThinkPad 755CV, ThinkPad 755CD, ThinkPad 755CDV | |
|
Machine Type |
9545 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |