|
2.803 bytes |
Service Hints & Tips |
Document ID: MNOK-3TAK2U |
Aptiva - How to select a different channel for a cordless mouse
Applicable to: Canada, United States
On the side of the Receiver (the part that is plugged into the mouse port of the computer) there is a small switch between a picture of one mouse and two mice. Move the switch to the Two position, then back to One.
On the bottom of the Mouse press and HOLD the small blue button until the Receiver light blinks. This could take up to 30 seconds. This changes the channel and establishes communication between the Mouse and the Receiver.
NOTE: If the light on the bottom of the Mouse does not light when the button is pressed, it may need new batteries.
|
Search Keywords |
| |
|
Hint Category |
Input Devices, Hardware Installation/Configuration | |
|
Date Created |
06-04-98 | |
|
Last Updated |
09-12-98 | |
|
Revision Date |
09-12-99 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2159, 2162 | |
|
Model |
S66; 14R; S7H; 19R; S78; 16R; S80; 17R; S90; 18R; S8H; 31R; S9H; 33R; S9C; 29R; SIB; S9M; 41R; S35; 35R | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |