|
2.376 bytes |
Service Hints & Tips |
Document ID: DDSE-3U6N5A |
PC Server 320/520 - 'Token-NW-206' error in NetWare Server
Applicable to: World-Wide
Symptom:
When user attempted to load the device driver TOKEN.LAN under NetWare 3.12, the following error message is displayed:
"Token-nw-206: An interrupt failed to occur during initialization. Module initialization failed."
Problem Isolation Aids:
The affected system may be either a Server 320 (8640) or a Server 520 (8641) with an EISA/PCI system board. A 3COM 3C679 Token ring adapter is installed. The operating system is Novell NetWare.
Fix:
The 3COM 3C679 will not function with the TOKEN.LAN driver if the 3COM 3C679 is configured at any address other than D8000 (hexidecimal address).
Note:
This problem may appear to be a lost hardware interrupt, but it is not. No hardware should be replaced.
NetWare is a trademark of Novell Inc.
3COM is a trademark of 3COM Corporation.
SAS KEYWORDS:
PSY2, SERVER, 320, 520, PSY2ADPT, PSY2PROG, PSY2COMM, D/T8641, 8640, 8641, PCI, EISA, PCI/EISA, PSY2OEM
|
Search Keywords |
PSY2, SERVER, 320, 520, PSY2ADPT, PSY2PROG, PSY2COMM, D/T8641, 8640, 8641, PCI, EISA, PCI/EISA, PSY2OEM | |
|
Hint Category |
Adapter Cards, Retain | |
|
Date Created |
18-12-95 | |
|
Last Updated |
15-07-98 | |
|
Revision Date |
14-07-2001 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 320, PC Server 520 | |
|
Machine Type |
8640, 8641 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
H132007 | |
|
Reverse Doclinks |