|
2.365 bytes |
Product Information |
Document ID: DDSE-452KFL |
PC Server 315 - General Checkout
Applicable to: World-Wide
This general checkout procedure is for computers that are supported by the QAPlus/PRO Diagnostics test.
Diagnostic error messages appear when a test program finds a problem test Passed, Failed, or Aborted. The test programs check the error-return code at test completion.
General error messages appear if a problem or conflict is found by an application program, the operating system, or both. For an explanation of these messages, refer to the information supplied with that software package.
NOTES:
1. If multiple error codes are displayed, diagnose the first error code displayed.
2. If the computer reports a POST error, go to "Symptom-to-FRU Index."
3. If the computer hangs and no error is displayed, go to "Undetermined Problem."
4. If a device cannot be selected from the Module Test menu, that device might be defective.
Step 1:
- Power-off the computer and all external devices.
- Check all cables and power cords.
- Set all display controls to the middle position.
- Insert the Diagnostics diskette into drive A.
- Power-on all external devices.
- Power-on the computer.
- Check for the following responses:
1. One beep.
2. Readable instructions or the Main Menu.
Step 2:
DID YOU RECEIVE THE CORRECT RESPONSES? NO
Find the failure symptom in the "Symptom-to-FRU Index."
DID YOU RECEIVE THE CORRECT RESPONSES? YES
Run the Advanced Diagnostics Test. If necessary, refer to "Diagnostics."
If you receive an error, go to the"Symptom-to-FRU Index."
|
Search Keywords |
| |
|
Document Category |
Diagnostics | |
|
Date Created |
12-02-99 | |
|
Last Updated |
12-02-99 | |
|
Revision Date |
12-02-2000 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 315 | |
|
Machine Type |
8638 | |
|
Model |
| |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |