|
3.438 bytes |
Service Hints & Tips |
Document ID: MNOK-3TAJGJ |
Aptiva - Is the ZIP drive on the primary IDE controller?
Applicable to: United States
2161-C9S
1. Turn the Computer on by pressing the power button.
2. Press F1 when "Press F1 to enter the setup utility" appears at the bottom of the screen.
3. Press the Down Arrow twice (to highlight "Disk Drives") then Press Enter.
4. If "Removable Disk Drive 2" is listed, the Zip Drive is set as Slave to the Hard Drive on the Primary IDE Controller.
2142-S6S
1. Turn the Computer on by pressing the power button.
2. Press F1 when IBM Aptiva screen appears.
3. Press the Down Arrow three times (to highlight "Disk Drives") then Press Enter.
4. If "Removable Disk Drive 2" is listed, the Zip Drive is set as Slave to the Hard Drive on the Primary IDE Controller.
2176-C6Z
1. Turn the Computer on by pressing the power button.
2. Press F1 when "Press F1 to enter the setup utility" appears at the bottom of the screen.
3. Press the Down Arrow twice (to highlight "Disk Drives") then Press Enter.
4. If "Removable Disk Drive 2" is listed, the Zip Drive is set as Slave to the Hard Drive on the Primary IDE Controller.
|
Search Keywords |
| |
|
Hint Category |
BIOS, ZIP Drives | |
|
Date Created |
06-04-98 | |
|
Last Updated |
09-12-98 | |
|
Revision Date |
09-12-99 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2142, 2161, 2176 | |
|
Model |
S6S; C9S; 25R; C6Z; 9R1 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |