|
3.099 bytes |
Service Hints & Tips |
Document ID: DJON-3G6R6K |
Aptiva - 2144-S15 Recovery instructions
Applicable to: United States
Creating a Recovery Diskette:
Normal Process:
If your system is working and you need to create a recovery diskette, do the following:
1. Find the Aptivaware icon on the Desktop.
2. Double-click on the icon.
3. Find the Custom Tools (or First Steps) icon and double-click on it.
4. Choose Make Recovery Diskette.
5. Make sure the diskette in drive A is formatted.
NOTE: Any data on the diskette will be lost.
FDISK:
FDISK will destroy all of the data on the hard drive!!
1. Boot with the recovery diskette and choose the option 3 off of the menu that reads:
2. Go to a DOS prompt.
3. At the DOS prompt, type FDISK.
4. Choose Option 3. Delete primary partition or logical drive.
5. It will warn you that all data will be lost, does you want to continue? Choose Y for Yes.
6. Choose Option 1. Create primary DOS partition or logical DOS drive.
7. Choose Option 1 again. Create primary partition.
8. Press the ESC key twice to exit FDISK. With the diskette in drive A:, press Ctrl-Alt-Del to reboot the system.
Format:
1. From the menu, choose option 3, Go to a DOS prompt.
2. At the command prompt again, type FORMAT C: .
3. It will warn you that all data will be lost, Choose Y to continue with the format.
4. After the hard drive is formatted, type EXIT.
Recovery:
At the blue menu screen again, choose option 1. Reload original IBM Aptiva Software. At this point it will tell you to place the recovery CD in the CD ROM drive and press any key to continue. The system will reload automatically.
|
Search Keywords |
| |
|
Hint Category |
Software Installation/Configuration | |
|
Date Created |
15-04-97 | |
|
Last Updated |
12-03-99 | |
|
Revision Date |
12-03-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2144 | |
|
Model |
21442R3; S15 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |