|
3.289 bytes |
Service Hints & Tips |
Document ID: GSMH-3EMEQ4 |
TP 365C/CS/CD/CSD/E/ED - Undetermined Problems
Applicable to: World-Wide
Undetermined Problems
You are here because the diagnostic tests did not identify which adapter or device failed, installed devices are incorrect, a short circuit is suspected, or the system is inoperative. Follow the procedures below to isolate the failing FRU (do not isolate non-defective FRUs).
Verify that all attached devices are supported by the computers.
Verify that the power supply being used at the time of the failure is operating correctly. (See "Power Systems Checkout")
1. Power-off the computer.
2. Check the cables, wires, and connectors for short circuits and open circuits. Visually check them for damage. If any problems are found, replace the FRU.
3. Remove or disconnect all of the following devices.
a. Non-IBM devices
b. Devices attached to external connectors
c. Printer, mouse, and other external devices d. Battery pack
e. Hard disk drive
f. Diskette drive or the device attached to the diskette drive connector
g. DIMM card
h. CD-ROM
i. Sound card
j. Port replicator k. Keyboard
l. Keyboard card
Note:
Remember that removing the hard disk drive, or any adapter or device, might cause configuration errors. Ignore error code 174.
4. Power-on the computer.
5. Determine if the problem has changed.
6. If the problem does not occur again, reconnect the removed devices one at a time until you find the failing FRU.
7. If the problem remains, replace the following FRUs one at a time. Do not replace a non-defective FRU.
DC/DC card
System board
LCD assembly
Processor card
|
Search Keywords |
| |
|
Hint Category |
Hardware Maintenance Information | |
|
Date Created |
23-07-96 | |
|
Last Updated |
19-08-98 | |
|
Revision Date |
18-08-99 | |
|
Brand |
IBM ThinkPad | |
|
Product Family |
ThinkPad 365C/CS, ThinkPad 365CD/CSD, ThinkPad 365E/ED | |
|
Machine Type |
2625 | |
|
Model |
Various | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |