|
Restrictions: |
- Not all available display modes run at the high refresh rates necessary for flicker-free performance. Display modes at lower refresh rates are available for compatibility with older graphics adapters and system units.
- Supported display modes are a function of the attaching system unit. The full range of display modes available with these monitors may not be available or supported with all combinations of system units, their operating systems, and application software.
- Horizontal and vertical sync signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H/V sync timings for any display mode cannot be stated.
- The number of colors shown in any display mode is not limited by the monitor but depends upon the capabilities of the adapter the monitor is attached to.
- The power management function is invoked only after initiating signals are received from the attached system unit and/or graphic adapter. The method used to implement power management follows the Video Electronics Standards Association (VESA) Display Power Management Signaling (DPMS) standard. This standard must also be implemented in the attaching system unit and/or graphic adapter for monitor power management to be effective.
- Implementation of monitor Plug and Play follows the VESA Display Data Channel (DDC) standard. This standard must also be implemented in the attaching system unit hardware and software to be effective.
- Not all system units are DDC-enable. In this situation the user is required to perform the configuration necessary to obtain optimum performance from the system/graphic, adapter/monitor combinations.
|
|
Supported software: |
N/A |
|
IBM systems: |
- PC 140, PC 330, PC 340, PC 350, PC 360, PC 365, PC 730 (6877), PC 750 (6887), PC 300GL, PC 300GL Pentium II models (6561, 6591), PC 300PL, PC 300PL Pentium II models, PC 300XL
- IntelliStation M Pro, IntelliStation Z Pro (6899), IntelliStation Ultimate Web Design Machine
- Netfinity 3500, Netfinity 3000, Netfinity 5500, Netfinity 5500 Rack Mounted models, Netfinity 7000, Netfinity 7000 Rack Mounted models
- PC Server 310 200MHz models, PC Server 325 Pentium II models, PC Server 325 Rack Mounted Pentium II models, PC Server 330 Pentium II models, PC Server 704
- ThinkPad 310, ThinkPad 315, ThinkPad 365, ThinkPad 380, ThinkPad 385, ThinkPad 560, ThinkPad 600, ThinkPad 730, ThinkPad 760, ThinkPad 765, ThinkPad 770
- SelectaDock I, II, III, SelectaBase 770, SelectaDock Base Model I, ThinkPad 365 Port Replicator, ThinkPad 380 Port Replicator, ThinkPad 560 Port Replicator
|
|
Non-IBM systems: |
The G52 Color Monitor is designed to operate with system units or video adapters that generate a video output signal that falls within the specifications below:
- Maximum addressability (pels) - 1280x1024
- Horizontal frequency (KHz) - 30-69
- Vertical frequency (Hz) - 50-120
|
|
Operating system requirements: |
* |
|
Adapters: |
* |
|
Mounting kit etc.: |
A signal cable adapter part number 96G1999 is required to permit attachment to 3483, 3488-V, and 3489 Modular Display Stations bits presented on the monitor interface. |
|
Product approvals & certifications4: |
- CE MARK (Europe)
- CSA C22.2 No. 950 (Canada)
- DNHW (Canada)
- EMI (B) (Korea)
- FCC Class B (US)
- FDA/DHHS (US)
- GS (Germany)
- ICES-003 Class B (Canada)
- NOM (Mexico)
- PTB (Germany)
- SEMKO (Sweden)
- UL-1950 First Edition
|
|
Energy Star Compliant: |
Yes |
|
Display case colour: |
Stealth black |
|
Terminal type: |
* |
|
Tube type: |
FST CRT |
|
Nominal screen size: |
15inches (381mm) |
|
Viewable image size: |
13.6inches (347mm) |
|
Maximum viewable width: |
280mm |
|
Maximum viewable height: |
210mm |
|
Pixel pitch/type: |
0.28mm dot |
|
Anti-glare: |
Yes |
|
Anti-static: |
Yes |
|
Touch screen: |
No |
|
Tilt/swivel stand: |
Yes |
|
Screen surface treatment: |
Anti-reflective |
|
Multimedia features: |
* |
|
Multiscanning: |
Yes |
|
Number of factory presets: |
9 |
|
Number of user presets: |
14 |
|
Preset modes: |
- 640x480/60, 75, 85
- 720x400/70
- 800x600/75, 85
- 1024x768/70, 75, 85
|
|
Microprocessor control: |
Yes |
|
Syncing: |
Multifrequency |
|
Top flicker free VESA mode: |
1024x768 at 85Hz NI |
|
Maximum addressibility: |
1280x1024 |
|
Onscreen programming: |
Yes |
|
Self-diagnostics: |
* |
|
Plug and play support: |
Yes |
|
Ergonomics: |
- EPA Energy Star compliant (US)
- GS (Germany)
- ISO 9241 Part 3
- NUTEK
- Proposed VESA 85Hz NI support
|
|
Emissions: |
- EMI (B)
- FCC Class B
- ICES-003 Class B
- MPR-II
- SWEDAC
|
|
Acoustics: |
Declared acoustical noise emissions LWAD = 4.5 bels or less |
|
Apple/workstation compatible: |
No |
|
Vertical refresh rate: |
low of 50Hz to a high of 120 Hz |
|
Maximum Horizontal frequency: |
low of 30kHz to a high of 69 kHz |
|
Power management features: |
VESA DPMS compliant
VESA DDC1/DDC2B |
|
Power consumption: |
90Watts |
|
Video inputs (connectors): |
* |
|
User display controls: |
Brightness, Contrast, Degauss, Degauss via Power Switch, Digital Control, Horizontal position, Horizontal size, Image rotation, Pincushion adjustment, Selectable color points, Tilt, Trapezoidal adjustment, Vertical position, Vertical size |
|
Other Information: |
- Supports most standard VGA, SVGA and XGA applications without modification
- A DDC-enabled monitor continually sends a stream of data through the video signal cable. The system unit stores and analyzes the received data and determines the combination of addressability and refresh rate (display mode) that best uses the capabilities of the monitor.
- The factory preset modes cannot be overwritten but any of them can be adjusted to personal choice. The new settings are automatically stored in one of the user locations and are recalled each time that mode is used. The factory setting for the mode is use, if any, can be restored by operating the Geometry Reset control.
- It may be necessary to make some adjustments to the displayed picture to compensate for variations in video signal timings. The user controls can be used to make these adjustments.
- The G52 Color Monitor is supplied with a 1.8 meter (6 feet) video signal cable. This cable carries the same 15-pin D-shell video connector as previous IBM monitor and are DDC 1/2B compatible for connection to newer DDC enabled system units.
- Supports the following InfoWindow Display Modes: 2, 3, 4, 5*, 6 *If the signal cable adapter is not used, this mode can be supported at the 60Hz refresh rate. The mode will not be ISO compliant, and power management will not function.
- Selectable color points: 9300K and 7200K
- Boarderless operation
- Clock Rate (Mpels/sec): 110
- Tilt/swivel stand characteristics: Tilt - 4.5 degrees forward/12 degrees backward, Swivel - 90 degrees (both left and right)
- Status LED
|
|
Weight: |
13.5Kg |
|
Height: |
385mm |
|
Width: |
370mm |
|
Depth: |
418mm |
|
Operating Temperature: |
low of 10 degrees Celcius to a high of 35 degrees Celcius |
|
Relative Humidity: |
low of 8% to a high of 80% |
