|
8.442 bytes |
Product Information |
Document ID: MCGN-3TMTRX |
PC Server 315 - Technical Specifications
Applicable to: World-Wide
2.1GB Hard Disk
-------------
- Formatted Capacity: 2100 million bytes *
- Average Seek Time: 8.5ms
- Burst Transfer Rate (max) 20.0MB/s
- Sustained Transfer Rate (max) 5.0 - 8.0MB/s
- Average latency: 5.56 ms
- Drive rotation speed (RPM) 5400 rpm
- Sector Interleave 1:1
8X SPEED CD-ROM DRIVE CHARACTERISTICS:
- Average Access Time: 150ms
- Average Data Transfer Rate: 1200KB/s
- Data Burst (sync. or async. mode) 5.0MB/s
- Buffer size 256KB
VIDEO SUBSYSTEM:
- 1MB DRAM display memory
- True color VGA graphical user interface accelerator
- Bit block transfer
- PCI interface
- Support for up to 24-bit per pixel color
- Compatible with VGA color, analog monochrome monitors, and multiple frequency monitors
- Integrated RAMDAC with 262,144 color palette
- Extensive graphic mode support
Supported video mode capabilities for the SVGA adapter standard on the PC Server 315.
OS/2 Warp
----------
RESOLUTION RATE (HZ)
640x480x16 60
640x480x256 60
640x480x64K 60
640x480x16M 60
800x600x256 56, 60
800x600x64K 56, 60
1024x768x256 60, 70
Windows NT V3.51
----------------
RESOLUTION RATE (HZ)
640x480x16 60
640x480x256 60
640x480x64K 60
640x480x16M 60
800x600x16 56, 60
800x600x256 56, 60
800x600x64K 56, 60
1024x768x16 43i, 60, 70
1024x768x256 43i, 60, 70
1280x1024x16 43i
Notes:
(1) 43i denotes 43Hz interlaced
(2) NetWare and SCO drivers are contained in the respective operating system packages or bulletin boards.
DIMENSIONS:
W/O Pedestal W/ Pedestal
- Width: 190mm (7.5 inches) 245mm (9.7 inches)
- Depth: 445mm (17.5 inches) 445mm (17.5 inches)
- Height: 380mm (15.0 inches) 395mm (15.6 inches)
- Weight: (open bay configuration) 12.2kg (26.9 lbs)
- Weight: (configured model) 13.1kg (28.8 lbs)
NOTE: The noise emission level stated is the declared (upper limit) sound power level, in bels, for a random sample of machines, typically configured, and operating in idle mode; i.e., powered on, but no disk drive read/write or other I/O activity. All measurements made in accordance with ANSI S12.10 and ISO 7779, and reported in conformance with ISO 9296.
PC Server 315 models are intended for use as floor-standing systems and are tested and designed to operate in a vertical position.
STANDARDS:
These systems comply with or support:
- Plug and Play Standard V1.1
- Peripheral Component Interconnect (PCI) specification 2.1
- Hardware enablement to meet the International Standards Organization (ISO) 9241, Part 3.
EQUIPMENT APPROVALS AND SAFETY:
US, AP, LA, CAN, EMEA
US, LA, CAN
- FCC - Verified to comply with Part 15 of the FCC Rules (Class A)
- UL 1950
- CSA C22.2 No. 950
- NOM
AP
- VCCI Class 1
- New Zealand Ministry of Commerce Approval-CISPR 22, Class A
- IEC-950 manufacturer's declaration of compliance for APG
EMEA
- CE Mark (EN 55022 Class A)
- CISPR 22, Class A
- FCC - Verified to comply with Part 15 of the FCC Rules (Class A)
- TUV/CDE EN60950/IEC-950
For non-Nordic European Countries:
These products have been certified by TUV Rheinland to the requirements of IEC-950/EN60950 "Safety of Information Technology Equipment" and ZH 1/618/10.80, the ergonomic standard covering safety at the workplace. The products hold the German GS License as an indication of this certification.
For Nordic European Countries:
These products have been tested to the requirements of IEC-950/EN60950 "Safety of Information Technology Equipment".
OPERATING ENVIRONMENT:
Temperature:
- 10.0 to 35.0 degrees C (50 to 95 degrees F) at 0 - 914m (0 - 3000ft.)
- 10.0 to 32.0 degrees C (50 to 90 degrees F) at 914 - 2133m (3000 - 7000 ft.)
Relative Humidity: 8 to 80 (percent)
Maximum Altitude: 2133m (7000 ft.)
HARDWARE REQUIREMENTS:
The PC Server 315 requires an analog display (P70, G40, G42, G50, G52, G70, G72 or equivalent) for system setup and service.
The PC Server 315, with an integrated SVGA controller and an ISO-capable display, such as P70, G40, G42, G50, G52, G70, G72 Color Monitors, and OS/2 Warp Server, are designed to comply with the requirements specified in the International Organization for Standardization (ISO) standard 9241/3.
SOFTWARE REQUIREMENTS:
PROGRAMMING REQUIREMENTS:
The following IBM operating systems/extensions support the PC Server 315:
- OS/2 Warp V4
- OS/2 Warp Server V4(*)
- OS/2 Warp Server Advanced V4(*)
AP
- OS/2 Warp Server 4.0(*)
(*) Certification is planned for these network operating systems
The following vendor network operating systems are supported in the PC Server 315:
- The Santa Cruz - Open Server 5.0.2(*)
Operation, Inc. - UnixWare 2.1.1(*)
- Microsoft - Windows NT 3.51 Server
- Windows NT 4.0 Server(*)
(*) Certification is planned for these network operating systems
|
Search Keywords |
| |
|
Document Category |
Technical Specifications | |
|
Date Created |
17-04-98 | |
|
Last Updated |
03-12-98 | |
|
Revision Date |
03-12-99 | |
|
Brand |
IBM PC Server | |
|
Product Family |
PC Server 315 | |
|
Machine Type |
8638 | |
|
Model |
KJ0; KS0; PJ0; PS0; PSV | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |