|
5.891 bytes |
Service Hints & Tips |
Document ID: PMYS-3LZKPA |
|
This document is provided to IBM and our Business Partners to help sell and/or service IBM products. It is not to be distributed beyond that audience or used for any other purpose. |
Aptiva - Sony 24X max CD-ROM
Applicable to: World-Wide
Overview of Building Block
24X Max CD-ROM
P/N: 12J3526 FRU P/N: 12J3527
Source: Sony
Specification Compatibility
IDE/ATAPI Conforms to SFF-8020i and SFF-8070i
Feature Specifics
Sony Model CDU-611
Support is provided for the following formats:
CD-Audio
CD-ROM (Mode 1 and Mode 2)
CD-ROM XA (Mode 2 form 1 and form 2)
CD-I (Mode 2 form 1 and form 2)
CD-I Ready
CD-I Bridge
Photo CD (single and multiple sessions)
CD-WO (fixed and variable packets)
Video CD
Enhanced Music CD
CD Plus
CD-E
CD-R Type 2
Performance Characteristics:
Transfer Rate: 24X Maximum (Full CAV varies from 10X to 24X or 1,500 KB/sec to 3,600 KB/sec)
Access Time: Less than 90 ms
Data Capacity: 656 MB (Mode 1) and 748 MB (Mode 2)
Burst Rate:
11.1 MB/sec (PIO Mode 3 w/o IORDY)
8.33 MB/sec (Single Word DMA Mode 1) (NOTE: DMA is NOT supported on the 2140-2142 systems, this is a drive specific spec)
13.3 MB/sec (Multi Word DMA Mode 2) (NOTE: DMA is NOT supported on the 2140-2142 systems, this is a drive specific spec)
Spin Up Time: 6 sec typical
Drive Reliability Features:
Nonrecoverable errors: Less than 1 error in 10**12 bits
Mean Time Between Failures: 100,000 POH
Mean Time to Repair: 0.5 hours
Service Life: 5 years
Drive Insertion/Removal Cycles (multiple disks): 10,000 minimum
Environmental Limits:
Operating
Temperature: 5 to 50 C
Relative Humidity (non-c): 10% to 90%
Max Temperature Gradient: 10 deg C / hour
Altitude: 10,000 feet
Shock: 5 G, 1/2 sine wave for 11 ms
Storage (6 months)
Temperature: -40 to 60 C
Relative Humidity (non-c): 10% to 90%
Max Temperature Gradient: --
Altitude: --
Shock: 5 G, 1/2 sine wave for 11 ms
Electrical Power Requirements:
+5 VDC +/-5% Max continuous: 600 mA Peak: 1500 mA
+5 VDC Maximum Ripple: 100 mV P-P
Physical Characteristics:
Height: 41.3 mm
Width: 146.0 mm
Length: 190.0 mm
Weight: 2 lbs
ATAPI Interface Channels:
NOTE: Aptiva Intrepid/Defiant Models with Zip ships with the HDD as the MASTER on the PRIMARY channel and the ZIP as SLAVE on the SECONDARY channel. The CD-ROM is a MASTER on the SECONDARY channel.
-The MASTER drive on the PRIMARY must be the boot drive, Drive C.
-If the Zip is to be the PRIMARY boot drive for the computer (Drive C) it must be configured as the MASTER on the PRIMARY channel.
-When configured as a MASTER drive the Zip drive will support either a second Zip ATA or ATAPI drive installed in the SLAVE configuration or an ATA hard drive configured as a SLAVE.
-When configured as a SLAVE drive, ZIP must be daisy-chained to a MASTER drive.
Jumper Settings:
(When viewed from the rear of the CD-ROM Drive, also reference label on drive)
Drive 0 Select (MASTER) Drive 1 Select (SLAVE) Cable Select (AUTO)
o o o o o o o o o
| | |
o o o o o o o o o
|
Search Keywords |
| |
|
Hint Category |
CD-ROM Drives, Technical Specifications | |
|
Date Created |
17-09-97 | |
|
Last Updated |
22-01-99 | |
|
Revision Date |
11-01-2000 | |
|
Brand |
IBM Aptiva | |
|
Product Family |
Aptiva | |
|
Machine Type |
2140, 2142 | |
|
Model |
L31; L3F; L5H; L61; S61; S6FL35; L45; S34; S44; S35; S45; S57; LQ1; LQ2; LQ3; L17; L27; L37; L47; S57; LG1; LV1; LG2; LV2; SG1; SV1 | |
|
TypeModel |
| |
|
Retain Tip (if applicable) |
| |
|
Reverse Doclinks |