Select the command you want to read about. You may also go back to the Commands List.

named

Provides the server function for the Domain Name Protocol.

namerslv

Directly manipulates domain name server entries for local resolver routines in the system configuration database.

ncheck

Generates path names from i-node numbers.

ndp

IPv6 neighbor discovery display and control.

ndpd-host

ndp daemon for hosts.

ndx

Creates a subject-page index for a document.

neqn

Formats mathematical text for the nroff command.

netlsd

Starts the license server.

netpmon

Monitors activity and reports statistics on network I/O and network-related CPU usage.

netstat

Shows network status.

newaliases

Builds a new copy of the alias database from the /etc/aliases file.

newfile

Converts a text file into an INed structured file.

newform

Changes the format of a text file.

newgrp

Changes your primary group identification.

newkey

Creates a new key in a /etc/publickey file.

news

Writes system news items to standard output.

next

Shows the next message.

nfsd

Starts client requests for file system operations.

nfso

Configures Network File System (NFS) network options.

nfsstat

Displays statistical information about the Network File System (NFS) and Remote Procedure Call (RPC) calls.

nice

Runs a command at a lower or higher priority.

nim

Performs operations on Network Install Manager (NIM) objects.

nimclient

Allows Network Installation Manager (NIM) operations to be performed from a NIM client.

nimconfig

Initializes the Network Install Manager (NIM) client package.

nimdef

Defines Network Installation Manager (NIM) clients from a stanza file. This command applies to AIX Version 4.2 or later.

niminit

Configures the Network Installation Management (NIM) client package.

nl

Numbers lines in a file.

nm

Displays the symbol table of an object file.

no

Configures network options.

nohup

Runs a command without hangups.

nrglbd

Manages the Global Location Broker database.

nroff

Formats text for printing on typewriter-like devices and line printers.

nslookup

Queries Internet domain name servers.

nsupdate

Updates a DNS server.

ntpdate

Sets the date and time using the Network Time Protocol (NTP). This command applies to AIX Version 4.2 or later.

ntpq

Starts the standard Network Time Protocol (NTP) query program. This command applies to AIX Version 4.2 or later.

ntptrace

Traces a chain of Network Time Protocol (NTP) hosts back to their master time source. This command applies to AIX Version 4.2 or later.

ntsc

Enables or disables NTSC (National Television Standards Committee) video output of IBM ThinkPad Power Series 850 which has G10 Graphics with Motion Video Adapter.

ntx_arp

Displays and modifies the Network Terminal Accelerator (NTX) adapter's Internet-to-Ethernet address translation table.

ntx_chaddr

Displays the configurations of or configures individual Network Terminal Accelerator (NTX) channels.

ntx_chinfo

Displays Network Terminal Accelerator (NTX) channel information. This command applies to AIX Version 4.2 or later.

ntx_chreset

Resets a Network Terminal Accelerator (NTX) channel. This command applies to AIX Version 4.2 or later.

ntx_comun

Displays and configures a Simple Network Management Protocol (SNMP) community profile for a Network Terminal Accelerator (NTX).

ntx_dlli

Accesses the Diagnostic Link Layer Interface (DLLI) for the Network Terminal Accelerator (NTX).

ntx_dloop

Performs a direct memory access (DMA) loopback test for the Network Terminal Accelerator (NTX).

ntx_ifcfg

Displays or assigns the Network Terminal Accelerator (NTX) network interface address.

ntx_load

Downloads code to a Network Terminal Acclerator (NTX) host adapter board.

ntx_log

Displays Network Terminal Accelerator (NTX) log information.

ntx_macaddr

Configures the Network Terminal Accelerator (NTX) MAC-layer addresses.

ntx_nms

Displays and configures network management station (NMS) authentication for the Network Terminal Accelerator (NTX) Simple Network Management Protocol (SNMP) agent.

ntx_nstat

Displays network information for the Network Terminal Accelerator (NTX).

ntx_ping

Sends an echo request to a network host from the Network Terminal Accelerator (NTX).

ntx_pserv

Displays and assigns services to protocol ports for the Network Terminal Accelerator (NTX).

ntx_reset

Resets the Network Terminal Accelerator (NTX) adapter. This command applies to AIX Version 4.2 or later.

ntx_route

Manipulates the Network Terminal Accelerator (NTX) routing tables.

ntx_snmp

Sets and displays the state of the Network Terminal Accelerator (NTX) Simple Network Management Protocol (SNMP) agent.

ntx_stat

Displays and clears Network Terminal Accelerator (NTX) diagnostic information.

ntx_traps

Displays or configures the Network Terminal Accelerator (NTX) Simple Network Management Protocol (SNMP) traps.

ntx_ttype

Adds to, displays, or clears the terminal type database for the Network Terminal Accelerator (NTX).

ntx_ver

Displays Network Terminal Accelerator (NTX) version information.

ntx_wdog

Starts the watchdog timer on a Network Terminal Accelerator (NTX) adapter board. This command applies to AIX Version 4.2 or later.

nulladm

Creates active accounting data files.

number

Displays the written form of a number.

Go back to the Commands List.