| ali |
| |
Lists mail aliases and their addresses. |
| anno |
| |
Annotates messages. |
| ap |
| |
Parses and reformats addresses. |
| bugfiler |
| |
Automatically stores bug reports in specified mail directories. |
| burst |
| |
Explodes digests into messages. |
| comp |
| |
Composes a message. |
| conflict |
| |
Searches for alias and password conflicts. |
| dist |
| |
Redistributes a message to additional addresses. |
| dp |
| |
Parses and reformats dates. |
| folder |
| |
Selects and lists folders and messages. |
| folders |
| |
Lists all folders and messages in mail directory. |
| forw |
| |
Forwards messages. |
| inc |
| |
Incorporates new mail into a folder. |
| install_mh |
| |
Sets up mailbox directories. |
| mark |
| |
Creates, modifies, and displays message sequences. |
| mhl |
| |
Produces formatted listings of messages. |
| mhmail |
| |
Sends or receives mail. |
| mhpath |
| |
Prints full path names of messages and folders. |
| msgchk |
| |
Checks for messages. |
| msh |
| |
Creates an MH shell. |
| next |
| |
Shows the next message. |
| packf |
| |
Compresses the contents of a folder into a file. |
| pick |
| |
Selects messages by content, and creates and modifies sequences. |
| post |
| |
Routes a message. |
| prev |
| |
Shows the previous message. |
| prompter |
| |
Invokes a prompting editor. |
| rcvdist |
| |
Sends a copy of incoming messages to additional recipients. |
| rcvpack |
| |
Saves incoming messages in a packed file. |
| rcvstore |
| |
Incorporates new mail from standard input into a folder. |
| rcvtty |
| |
Notifies the user of incoming messages. |
| refile |
| |
Moves files between folders. |
| repl |
| |
Replies to a message. |
| rmf |
| |
Removes folders and the messages they contain. |
| rmm |
| |
Removes messages from active status. |
| scan |
| |
Produces a one line per message scan listing. |
| send |
| |
Sends a message. |
| sendbug |
| |
Mails a system bug report to a specified address. |
| show |
| |
Shows messages. |
| slocal |
| |
Processes incoming mail. |
| sortm |
| |
Sorts messages. |
| spost |
| |
Routes a message. |
| vmh |
| |
Invokes a visual interface for use with MH commands. |
| whatnow |
| |
Invokes a prompting interface for draft disposition. |
| whom |
| |
Manipulates Message Handler (MH) addresses. |
| automount |
| |
Mounts NFS file systems automatically. |
| biod |
| |
Handles client requests for files. |
| bootparamd |
| |
Provides information for booting to diskless clients. |
| chnfs |
| |
Changes the configuration of the system to invoke a specified number of biod and nfsd daemons. |
| chnfsexp |
| |
Changes the options used to export a directory to NFS clients. |
| chnfsmnt |
| |
Changes the options used to mount a directory from an NFS server. |
| exportfs |
| |
Exports and unexports directories to NFS clients. |
| lockd |
| |
Processes lock requests. |
| mknfs |
| |
Configures the system to run NFS. |
| mknfsexp |
| |
Exports a directory to NFS clients. |
| mknfsmnt |
| |
Mounts a directory from an NFS server. |
| mountd |
| |
Answers requests from clients for file system mounts. |
| nfsd |
| |
Starts client requests for file system operations. |
| nfso |
| |
Configures Network File System (NFS) network options. |
| nfsstat |
| |
Displays statistical information about the Network File System (NFS) and Remote Procedure Call (RPC) calls. |
| on |
| |
Executes commands on remote systems. |
| portmap |
| |
Converts RPC program numbers into Internet port numbers. |
| rexd |
| |
Executes programs for remote machines. |
| rmnfs |
| |
Changes the configuration of the system to stop invoking the NFS daemons. |
| rmnfsexp |
| |
Unexports a directory from NFS clients. |
| rmnfsmnt |
| |
Removes an NFS mount. |
| rpcgen |
| |
Generates C code to implement an RPC protocol. |
| rpcinfo |
| |
Reports the status of Remote Procedure Call (RPC) servers. |
| rpc.pcnfsd |
| |
Handles service requests from PC-NFS (Personal Computers Network File System) clients. |
| rstatd |
| |
Returns performance statistics obtained from the kernel. |
| rup |
| |
Shows the status of a remote host on the local network. |
| rusers |
| |
Reports a list of users logged in remote machines. |
| rusersd |
| |
Responds to queries from the rusers command. |
| rwall |
| |
Sends messages to all users on the network. |
| rwalld |
| |
Handles requests from the rwall command. |
| showmount |
| |
Displays a list of all clients that have remotely mounted file systems. |
| spray |
| |
Sends a specified number of packets to a host and reports performance statistics. |
| sprayd |
| |
Receives packets sent by the spray command. |
| statd |
| |
Provides crash and recovery functions for the locking services on NFS. |
| chkey |
| |
Changes your encryption key. |
| chmaster |
| |
Executes the ypinit command and restarts the NIS daemons to change a master server. |
| chslave |
| |
Re-executes the ypinit command to retrieve maps from a master server and restarts the ypserv daemon to change the slave server. |
| chypdom |
| |
Changes the current domainname of the system. |
| domainname |
| |
Displays or sets the name of the current NIS domain. |
| keyenvoy |
| |
Acts as an intermediary between user processes and the keyserv daemon. |
| keylogin |
| |
Decrypts and stores the user's secret key. |
| keyserv |
| |
Stores public and private keys. |
| lsmaster |
| |
Displays the characteristics for the configuration of an NIS master server. |
| lsnfsexp |
| |
Displays the characteristics of directories that are exported with the Network File System (NFS). |
| lsnfsmnt |
| |
Displays the characteristics of NFS mountable file systems. |
| makedbm |
| |
Makes a Network Information Service (NIS) map. |
| mkclient |
| |
Uncomments the entry in the /etc/rc.nfs file for the ypbind daemon and starts the ypbind daemon to configure a client. |
| mkkeyserv |
| |
Uncomments the entry in the /etc/rc.nfs file for the keyserv daemon and invokes the daemon by using the startsrc command. |
| mkmaster |
| |
Invokes the ypinit command and starts the NIS daemons to configure a master server. |
| mkslave |
| |
Executes the ypinit command to retrieve maps from an NIS master server and starts the ypserv daemon to configure a slave server. |
| newkey |
| |
Creates a new key in the /etc/publickey file. |
| revnetgroup |
| |
Reverses the listing of users and hosts in network group files in NIS maps. |
| rmkeyserv |
| |
Stops the keyserv daemon and comments the entries for the keyserv daemon in the /etc/rc.nfs file. |
| rmyp |
| |
Removes the configuration for NIS. |
| ypbind |
| |
Enables client processes to bind, or connect, to an NIS server. |
| ypcat |
| |
Prints out an NIS map. |
| ypinit |
| |
Sets up NIS maps on an NIS server. |
| ypmatch |
| |
Displays the values of given keys within an NIS map. |
| yppasswd |
| |
Changes your network password in NIS. |
| yppasswdd |
| |
Receives and executes requests from the yppasswd command. |
| yppoll |
| |
Displays the order number (ID number) of the NIS map currently in use on the server. |
| yppush |
| |
Prompts the NIS slave servers to copy updated NIS maps. |
| ypserv |
| |
Looks up information in local NIS maps. |
| ypset |
| |
Directs a client machine to a specific server. |
| ypupdated |
| |
Updates information in NIS maps. |
| ypwhich |
| |
Identifies either the NIS server or the server that is the master for a given map. |
| ypxfr |
| |
Transfers an NIS map from an NIS server to a local host. |
| arp |
| |
Displays and modifies address resolution. |
| chnamsv |
| |
Changes TCP/IP-based name service configuration on a host. |
| chprtsv |
| |
Changes a print service configuration on a client or server machine. |
| f |
| |
Shows user information. |
| finger |
| |
Shows user information. |
| fingerd |
| |
Provides server function for finger command. |
| ftp |
| |
Transfers files between a local and a remote host. |
| ftpd |
| |
Provides the server function for the Internet FTP protocol. |
| gated |
| |
Provides gateway routing functions for the RIP, EGP, HELLO, and SNMP protocols. |
| gettable |
| |
Gets NIC format host tables from a host. |
| host |
| |
Resolves a host name into an Internet address or an Internet address into a host name. |
| hostent |
| |
Directly manipulates address-mapping entries in the system configuration database. |
| hostid |
| |
Sets or displays the identifier of the current local host. |
| hostname |
| |
Sets or displays the name of the current host system. |
| htable |
| |
Converts host files to the format used by network library routines. |
| ifconfig |
| |
Configures or displays network interface parameters for a network that is using TCP/IP. |
| inetd |
| |
Provides Internet service management for a network. |
| ipreport |
| |
Generates a packet trace report from the specified packet trace file. |
| iptrace |
| |
Provides interface-level packet tracing for Internet protocols. |
| lpd |
| |
Provides the remote print server on a network. |
| lsnamsv |
| |
Shows name service information stored in the database. |
| lsprtsv |
| |
Shows print service information stored in the database. |
| mkhosts |
| |
Generates the host table file. |
| mknamsv |
| |
Configures TCP/IP-based name service on a host for a client. |
| mkprtsv |
| |
Configures TCP/IP-based print service on a host. |
| mktcpip |
| |
Sets the required values for starting TCP/IP on a host. |
| named |
| |
Provides the server function for the Domain Name Protocol. |
| namerslv |
| |
Directly manipulates domain name server entries for local resolver routines in the system configuration database. |
| netstat |
| |
Shows network status. |
| nslookup |
| |
Queries Internet domain name servers. |
| ping |
| |
Sends an echo request to a network host. |
| rcp |
| |
Transfers files between a local and a remote host or between two remote hosts. |
| remsh |
| |
Executes the specified command at the remote host or logs into the remote host. |
| rexec |
| |
Executes commands one at a time on a remote host. |
| rexecd |
| |
Provides the server function for the rexec command. |
| rlogin |
| |
Connects the local host with a remote host. |
| rlogind |
| |
Provides the server function for the rlogin command. |
| rmnamsv |
| |
Unconfigures TCP/IP-based name service on a host. |
| rmprtsv |
| |
Unconfigures a print service on a client or server machine. |
| route |
| |
Manually manipulates the routing tables. |
| routed |
| |
Manages network routing tables. |
| rsh |
| |
Executes the specified command at the remote host or logs into the remote host. |
| rshd |
| |
Provides the server function for remote command execution. |
| ruptime |
| |
Shows the status of each host on a network. |
| ruser |
| |
Directly manipulates entries in three separate system databases that control foreign host access to programs |
| rwho |
| |
Shows which users are logged in to hosts on the local network. |
| rwhod |
| |
Provides the server function for the rwho and ruptime commands. |
| securetcpip |
| |
Enables the operating system network security feature. |
| setclock |
| |
Sets the time and date for a host on a network. |
| slattach |
| |
Attaches serial lines as network interfaces. |
| sliplogin |
| |
Configures a standard-input terminal line as a Serial Line Internet Protocol (SLIP) link to a remote host. |
| talk |
| |
Converse with another user. |
| talkd |
| |
Provides the server function for the talk command. |
| tcpdump |
| |
Prints out packet headers. |
| telinit |
| |
Initializes and controls processes. |
| telnet |
| |
Connects the local host with a remote host using the TELNET interface. |
| telnetd |
| |
Provides the server function for the TELNET protocol. |
| tftp |
| |
Transfers files between hosts using the Trivial File Transfer Protocol (TFTP). |
| tftpd |
| |
Provides the server function for the Trivial File Transfer Protocol. |
| timed |
| |
Invokes the time server daemon at system startup time. |
| timedc |
| |
Returns information about the timed daemon. |
| tn |
| |
Connects the local host with a remote host using the TELNET interface. |
| tn3270 |
| |
Connects the local host with a remote host using the TELNET interface. |
| traceroute |
| |
Prints the route that IP packets take to a network host. |
| trpt |
| |
Performs protocol tracing on TCP sockets. |
| utftp |
| |
Transfers files between hosts using the Trivial File Transfer Protocol (TFTP). |
Commands List:
X.25 WAN Support
| chhcons |
| |
Changes an HCON session profile. |
| clhcons |
| |
Classifies an HCON session profile. |
| e789 |
| |
Initiates one or more HCON emulation sessions. |
| e789cln |
| |
Stops an HCON session and its associated resources. |
| e789pr |
| |
Initiates an HCON printer session. |
| fxfer |
| |
Transfers files between a local system and a host computer connected by HCON. |
| genprof |
| |
Generates an automatic logon/logoff profile for an AUTOLOG procedure. |
| hconutil |
| |
Starts the HCON Utility Program. |
| lshconp |
| |
Lists all defined HCON session profiles for an HCON user. |
| lshcons |
| |
Lists the characteristics of a HCON session profile. |
| lshconu |
| |
Lists all HCON users. |
| mkhcons |
| |
Creates an HCON session profile. |
| mkhconu |
| |
Registers an HCON user. |
| rmhcons |
| |
Removes an HCON session profile. |
| rmhconu |
| |
Removes an HCON user. |
| stathcon |
| |
Lists the status of HCON session profiles and SNA Logical Unit (LU) pools. |
| sthcondmn |
| |
Starts the hcondmn subsystem. |
| tlog |
| |
Tests an AUTOLOG script. |
| xhcon |
| |
Invokes an HCON session using the Motif interface. |