System Hangs at "Multiuser Initialization" After a mksysb Restore

Environment

OS Level: AIX Version 4.2.1
Type/Model: 320

Problem

After completing a mksysb restore, on initial reboot, the system hangs on the message below: 
   Multiuser Initialization Complete

Solution

If the console is an IBM 3151 terminal, it is likely to be cabled incorrectly. A clocal must be added to the tty. Complete the following steps.
  1. Boot system in Service mode.
  2. Access a root volume group and start a shell.
  3. Enter export TERM=ibm3151.
  4. Enter smitty tty and select Change/Show Characteristics of a TTY.
  5. Change the stty attributes for runtime and login. Add clocal to the end.
  6. Scroll to the bottom of the SMIT menu and instruct the chdev command to Apply change to DATABASE only.
  7. Reboot the system. Enter: 
       sync;sync;sync;reboot
System Hangs at "Multiuser Initialization" After a mksysb Restore: ITEM: FAX
Dated: 2000/04/28~00:00 Category: anz
This HTML file was generated 2001/03/08~16:06:36
Comments or suggestions? Contact us