
                               INSTALLATION NOTES



        This application is supplied with its own Windows hosted
        installation procedure which you should run to install the
        software.

        You may run the installation procedure in one of two ways:


        1) From Windows Program Manager, select the File/Run menu
           option and enter the following command:

                 d:\SETUP

                 where d is the letter of your diskette drive


        2) From Windows File Manager, click on your diskette drive
           icon and then double click on the SETUP.EXE file to run it.


        In both cases, the install procedure will then initialise itself
        and display a 'Welcome' dialog followed by a request to enter the
        drive and directory on which you wish to install the software.
        The Setup procedure will automatically create the directory you
        specify and copy the necessary files into it.
        It is necessary to install some files in your \WINDOWS directory.
        The Setup procedure will install .INI and .PIF files in here.

        If you wish to de-install this software at any time, select the
        de-install icon. This will remove all files and directories
        relating to the application including those copied into your
        \WINDOWS directory (.INI files).
        Note that if you store any other files in the same directory as
        this application, the de-install will delete them, however, it
        will not remove sub-directories of the application's directory
        should you create any.


        If you have downloaded this software from a bulletin board such
        as Compuserve or the Internet it would have been compressed using
        PKZIP. You should use PKUNZIP to uncompress the .ZIP file onto a
        floppy diskette. In this way you will create yourself a ready-made
        install disk which you can use straight away to install the
        software automatically onto your hard disk and/or copy/distribute
        to other users.

        If you require any further information, please see the
        HelpBuilder help file 'Contacting GPP Software' section for
        information on how to contact GPP Software.

