/*****************************************************************/

RFFlow is the ideal program for creating a wide variety of
flowcharts, organization charts, and diagrams for education,
business, and industry.

/*****************************************************************/

The trial version of RFFlow has the restriction that you can
only put 16 objects in your chart.  Everything else is fully
functional, but you can only draw small charts with the trial
version of RFFlow.  The trial does not stop you from drawing
lines, so you should place your shapes first. After placing
16 shapes, then connect them.  The trial version
of RFFlow is trialware which is a form of Shareware.

We urge you to give the trial version of RFFlow to your 
friends so they can try it out too.  The trial version of RFFlow
is freely distributable. You can download the most recent
version of the trial from our Web site at www.rff.com.

The author of RFFlow is Roger Faaborg who can be 
contacted at roger@rff.com.  

/*****************************************************************/
This file contains the following sections:

          1. TECHNICAL SUPPORT

          2. BASIC INSTALLATION

          3. NETWORK INSTALLATION

          4. FILES ON THE RFFLOW CD-ROM

          5. REMOVING RFFLOW FROM YOUR SYSTEM

          6. ORDERING INFORMATION

/*****************************************************************/

          1. TECHNICAL SUPPORT

Technical questions can be answered by contacting RFF Electronics.
There is no charge for technical support.

For questions, contact:

email:  roger@rff.com
phone:  (970) 663 5767
fax:    (970) 669 4889

RFF Electronics
1053 Banyan Court
Loveland, CO  80538-2113

Web Site:  www.rff.com

/*****************************************************************/

          2. BASIC INSTALLATION

1. Use PKZip 2.50 to unzip the file rftri403.zip.  Find the file
setup.exe and run it.  

2. The RFFlow setup program will run and it will step you 
through the installation process. Basically, you will need 
to decide where you want the RFFlow executable files to be 
stored and where you want your flowcharts stored. You can 
always accept the default folders. The RFFlow setup program 
allows you to install RFFlow on a local hard drive or on a 
network.

/**************************************************************/

          3. NETWORK INSTALLATION

These are the instructions for installing rfflow.exe in a 
folder that is shared by the users.  It is up to you whether 
you want rfflow.exe installed on each user's hard disk or 
only once on the server.  The licensing is based on the 
number of concurrent users, not how the program is installed.
The files are small so you are not saving much space by running
rfflow.exe from the server.


1. First run setup.exe from the CD-ROM, diskettes,
   or unzipped files .

2. Select the "Network Install/Remove" button to get
   to the "Network Installation or Removal" dialog box.

3. First do the server part of the installation.

4. Click on the Install button in the Network Server
   group.  This will copy all the files in the \FILES
   directory of the CD-ROM to your file server.  You
   have to supply the name of the folder on the file
   server where you want the files copied.  This part
   of the installation does not write to the Windows 
   Registry.  It only copies files from the CD-ROM to
   your file server.

5. Next do the client workstation part of the installation.

6. This time run setup.exe from the file server and not
   from the CD-ROM.  By running setup.exe from the file
   server, the program will be able to fill in the path
   to the file server. 

7. Run setup.exe from the file server and click on the
   "Network Install/Remove" button.  Then click on the
   Install button in the Network Client Workstation group.

8. This will write information to the Windows Registry so
   the user needs the appropriate permissions. You will
   be asked to supply the path to the server files. If you
   ran RFFlow from the server, the edit box will already
   contain the correct path.  You will also be asked to 
   supply the folder where you want flowchart files stored.
   The other questions involve whether you want a shortcut
   on your desktop, in the Start menu, and whether you want
   to copy the sample flowchart files.  Then the program
   copies these files to your charts directory:

   init.flo       (initialization file, needed so the user can)
                  (customize the stencils.)
   rfshapes.ini   (ini file for RFEdit shapes, from version 3)

   userdic.tlx    (user personal dictionaries)
   correct.tlx
   accent.tlx
   html.tlx

   some sample .flo files.

9. Next the setup program writes information into the 
   Windows Registry.


The RFFlow program installs only one dll which is used for 
spelling checking.  It is placed in the same folder as 
rfflow.exe.  The RFFlow program installs no other dlls.

The registration number should be entered in the box 
when it is requested, but there is no checking.  You 
can leave the box blank if you don't know the number. 

The shared files occupy less than 4 MB of disk space.
A working folder occupies less than 300K bytes of disk space. 

Each time RFFlow runs, it checks that it is registered and
will try to register if it is not. If you have questions, call 970-663-5767 or e-mail help@rff.com

/**************************************************************/

          4. FILES ON THE RFFLOW CD-ROM

Root:
   setup.exe    (the installation program for RFFlow)
   autorun.inf  (the auto run file)
   readme.txt   (the file you are reading)

  \Files       (folder)
     rfflow.exe     (main executable for RFFlow program)
     rfflow.hlp     (help file for RFFlow program)
     rfflow.cnt     (part of help system for RFFlow program)
     init.flo       (initialization flowchart for rfflow.exe)
     rfshapes.ini   (ini file for using RFEdit shapes)
     setup.exe      (copy of setup.exe for RFFlow)
     ssce5312.dll   (dll for Wintertree Software spelling checker)
     ssceam.tlx     (American dictionary)
     ssceam2.clx    (American dictionary)
     sscebr.tlx     (British dictionary)
     sscebr2.clx    (British dictionary)
     userdic.tlx    (user dictionary)
     correct.tlx    (auto correct lexicon)
     accent.tlx     (words containing non-ascii characters)
     html.tlx       (common HTML key words)
     ssce.hlp       (help file for spelling checker)
     readme.txt     (the file you are reading)

     sample *.flo files        

  \Backup  (folder)
         (identical files to those in \Files directory)
         (duplicate copy of all files)


/*************************************************************/

          5. REMOVING RFFLOW FROM YOUR SYSTEM

A. Removing RFFlow from a local hard disk.

Click on Start, Settings, and Control Panel.  In Control
Panel double-click Add/Remove Programs.  Find RFFlow and
click on the Add/Remove button.  RFFlow setup will run.
Click on the Remove button in the local hard disk section.  
The setup program looks in the registry to find where the 
RFFlow files are located and removes them.  Then it removes 
registry entries.  If you have RFFlow installed more than 
once on a system, setup will remove the installation that 
is referred to in the registry.  For the other installations, 
setup will ask you to find the directory of each RFFlow 
installation and then setup can remove the files.

Setup does not remove any data files. (.flo)  These 
will have to be deleted by the user.



B. Removing RFFlow from a network.

1. Remove RFFlow from each workstation before 
   removing the server files.

2. Click on Start, Settings, and Control Panel.
   Double-click Add/Remove Programs. Find RFFlow
   in the list and click on the Add/Remove button.

3. After removing RFFlow from the Workstations,
   run setup from the server and click on the
   Remove button associated with the server. This
   will delete all the files on the server that
   are not data files.

4. No data files are deleted.  You will have
   to remove these or back them up yourself.  



/*************************************************************/

           6. ORDERING RFFLOW

There are order forms and pricing information on our Web 
site at www.rff.com. You can also call us directly at 
970-663-5767. 

Fill in the information below and mail, phone, or fax your 
order to us. Call us if you need to download the program 
immediately.

RFFlow requires Microsoft Windows 95, Windows 98, or 
Windows NT 4.0 or later, and a Windows-compatible mouse.  
RFFlow is fully Year 2000 Compliant.

																															                                                                                                     PRICE
                            QUANTITY   EACH      AMOUNT

A. RFFlow 4 SOFTWARE PACKAGE  
(Includes software license,
CD-ROM, and user's guide)
Quantity 1 - 4                  ______ x  $79.00  =	   _________
Quantity 5 and up            ______ x  $64.00  =	   _________
Academic/Government (1-4)   ______ x  $64.00  = _________
Academic/Government (5 +)   ______ x  $55.00  = _________


B. RFFlow 4 LICENSE ONLY
(Includes software license
and CD-ROM) ( No shipping charge)
Quantity 1 - 4                         ______ x  $59.00  =_________
Academic/Government (1 - 4)   ______ x  $44.00  =_________


C. RFFlow 4 LICENSE PACK
(Includes software licenses,
one CD-ROM, and one user's guide 
for each 5 users)
Concurrent Users (5 - 49)  ______  x  $39.00  =	_________
Concurrent Users (50 +)    ______  x  $35.00  =	_________
Additional User’s Guides   ______  x  $20.00  =	_________


SHIPPING: UPS Ground  UPS 3 Day UPS 2nd Day Air  UPS Next Day Air
(USA)      ($5.00)     ($7.00)   ($9.00)          ($20.00)	
Other: _______________   (Call for cost, or give acct.#)
[Shipping costs are for one package and are approximate;
call for exact shipping costs.]					

                                     Shipping: _________           
																																	                                                                                                                                                                                                                                   TOTAL:    _________

METHOD OF PAYMENT:

A. Check or Money Order enclosed (payable to RFF Electronics)

B. Credit Card:	____VISA ____MasterCard ____American Express
												Account					  Exp.																			Number __________________________________ Date _____ /______

												Cardholder's Signature_____________________________________


C. Net 30 Days. Company Purchase Order Number:_____________

D. COD (No extra charge)


Purchaser's Name __________________________________							

Order Date _______________________


SHIP TO:	 

Name___________________________________________

Company _______________________________________

Street Address ________________________________ 
(Not P.O. Box)
               ________________________________

City____________________  State______ Zip______ 

Telephone(_____)_______________________________ 

Fax( _____ )___________________________________


BILL TO:

Name___________________________________________

Company________________________________________

Address________________________________________

       ________________________________________

City _____________________ State ______Zip_____

Telephone(_____)_______________________________


Fax orders to 970-669-4889


Thank you for your order!


RFF ELECTRONICS
1053 Banyan Court
Loveland, CO  80538-2113

Web Site:  www.rff.com

email:  orders@rff.com
phone:  (970) 663 5767
fax:    (970) 669 4889

