			Easy Desk Software
		http://www.easydesksoftware.com
			easydesk@easydesksoftware.com
			 (516) 587-9015

WinSafe98 NOTES


YOU MUST USE THE SETUP PROGRAM TO INSTALL ALL THE FAILSAFE FEATURES.

IF YOU HAVE A PROBLEM INSTALLING WinSafe98 CONTACT US IMMEDIATELY BEFORE USE.

After you have installed WinSafe98 certain procedures must be observed if you decide to make any of the following changes:


Move the Windows directory 
Compress the C drive 
Uncompress the C drive 
You must run the WinSafe Set Boot option after performing any of the above 
procedures. After rebooting WinSafe will detect a change and make adjustments.
 
TABLE OF CONTENTS
Easy Desk Software
WinSafe98 NOTES
Glossary
Who needs WinSafe98
SETUP
NETWORKS
HOW TO INSTALL WinSafe98
Removing Files from VMM32
WAIT TIME
TESTING
REBOOTING
FREE DISK SPACE

BUTTONS:
ANTI VIRUS
BOOTLOG
CHECK REGISTRY
DEFRAGMENT
EDIT SYSTEM
EDIT REGISTRY
EXTRACT
FILE REPORT
HARDWARE
MSD
REPAIR SYSTEM FILES
REPAIR SYSTEM ICONS
RESTORE WITH CURRENT
RESTORE FROM SAFE
RESTORE WITH ORIGINAL
SCANDISK
SYSTEM INFO
SYSTEM REPORT


MENU ITEMS:
FILES:
VIEW FILE LOG
VIEW FILE REPORT
VIEW VIRUS REPORT
VIEW SYSTEM LOG
RELOG
DETAIL REPORT
TURN TIPS ON
TROUBLESHOOTER
TECH SUPPORT

RESTORE:
RESTORE
RESTORE FROM SAFE
RESTORED FROM DOS
SAVE OLD CONFIGURATION
CLEAR CONFIGURATION SETTINGS
WINDOWS BOOT OPTIONS
SAVE VMM32
REINSTALL Windows 95/98

SETUP:
SETUP TEXT
WINSAFE.INI
WAIT TIME
START TEST
TEST
STOP BOOTUP
SET BOOTUP
SYSTEM ONLY

UTILITIES:
EXPLORER
MEMORY
TASKMAN
MSDOS
UNINSTALL WinSafe98
DEVICE MANAGER
CONTROL PANEL
MOUSE
MODEM
ADD/REMOVE PROGRAMS
AUDIO/VIDEO
 
HELP: 
HELP FILE
Crash Recovery
BACKING UP
ERROR MESSAGES
RESTORING
RESTORE REGISTRY
HOW WinSafe98 WORKS


SETUP

NETWORKS

If you want to install WinSafe98 on a network, please contact the Wolf Agency
to obtain an administrator. Clients can be disabled, set for auto backup and 
controlled by the server.

HOW TO INSTALL WinSafe98 


READ THE FILE INSTALL.HTM FOR COMPLETE INSTRUCTIONS
If you are reading this you have already downloaded and unzipped all the 
needed files for the successful installation of WinSafe98.

To install:
Double-click on the program SETUP.EXE to run the setup program. 
Watch the TASKBAR. If an MSDOS window stays open please close it and continue. 
Follow the on screen instructions. The install wizard will guide you through 
the entire process. On most systems, it will take less than 5 minutes. 

WAIT TIME
WinSafe98 can not read files that are in use; it must WAIT until 
Windows 95/98 is loaded before it runs. If you receive an error notice 
during startup (bootup) after installing new programs, or after setting up 
WinSafe98, you may need to adjust the wait time. WinSafe will do this for 
you if the Registry is in use. If the file that is in use is not the Registry
then you will need to adjust the Wait Time manually. This may take up to 10 
reboots to Windows to get the WAIT TIME adjusted properly. 
NOTE: The Wait Time value is not in seconds it read at processor speed.

If you have IE 4.0 or higher on your system, you may have to reset the 
WAIT TIME when you first install WinSafe98 to 17. If you have not 
selected this option during setup and you get a message box after every 
boot telling you the Registry has changed and you should backup, then click 
on Check Registry Size. WinSafe98 will tell you if an error has occurred; or 
tell you the size of the current Registry and the size of the Registry 
WinSafe98 has in it's backup. This means that during bootup, some files are 
still in use that WinSafe98 needs to read. After adjusting the WAIT TIME 
WinSafe98 will make internal adjustments the next time you boot to Windows 
if you have set the Wait Time to high or if the Registry is still in use.

The preset Wait value is 11 when you install WinSafe98. A value of less 
then seven may cause WinSafe98 not to be able to read the Registry. If Wait 
is set too low, you get a message box at EVERY bootup that the Registry has 
changed. Click on Check Registry Size. If you get a message box saying that 
an error has occurred then Wait is set too low.

Increasing the number will cause a longer Wait and decreasing it will 
shorten the Wait Time. WinSafe98 must wait until the Registry is loaded and 
all programs (example: virus scanners) have started booting into Windows.

If you get a message window saying that a file is still in use see TESTING 
in this help file.

REBOOTING
If you system reboots when trying to access the Hardware utility on the 
WinSafe98 Interface you may need to reinstall Windows. Some mismatched DLL 
files that have been installed by other programs usually cause this problem. 
If you elect to reinstall you need not format first or use the restore 
feature from your manufactures CD. While Windows is reinstalling you will 
be prompted that the file being copied is older then the one on your system. 
It is recommended that you select the older file. You can update that file 
later. BE SURE to uninstall IE40 before reinstalling Windows, you can 
reinstall it later. 

TESTING
Testing is used when you have installed a program that WinSafe98 can not 
read. The message is File in use. You will receive this error message at 
bootup.
To fix the problem use The START TEST 

On the menu bar click on SETUP then START TEST. If the exception list is 
full, WinSafe will ask if it should clear it. Answer yes and it will 
rebuild it. 
Then Reboot, after rebooting if the file still is in use increase the 
Wait Time by 5. Then try rebooting again and repeat the process. 

FREE DISK SPACE
The free disk space may change each time you start WinSafe98. This is due 
to the size of your swap file in use. If during the course of a session, 
your free disk space decreases more than 30 Megs and you have not saved new 
files or added much information to your system, then you probably have a 
memory leak. WinSafe98 reads the free disk space only once upon access to 
the WinSafe98 interface. WinSafe98 can only report free space up 
to 2,147,155,968 bytes. If you should ever notice that the Free Space 
suddenly drops in large amount of disk space you FAT is messed up. 
You need to run Scandisk. Example: lets say you have 1,543,200,338 Free 
Space when you first start up your computer, then by the end of the day you 
notice that WinSafe98 is reporting 889,233 or something like this. You have 
a FAT problem. You should make repairs NOW before rebooting. Simply run 
scandisk.
 
BUTTONS
PICTURE of SAFE:
If you click on the little Safe in the lower portion of the WinSafe 
interface you will disable WinSafe98 from performing any tasks. You can 
now click on any button or Menu Item and WinSafe98 will describe to you 
what the button or Menu Item does and how to use it. To enable WinSafe98 
click on the Safe a second time.

ANTI VIRUS:
This option provides access to the MS virus scanner and is set to verify 
files in the event of a crash. Verifying files means that it will report 
files that have changed their Checksums. Use this button to check for a 
virus or to find if a file (DLL or exe, sys, or COM) as been replaced or 
corrupted. 

BACKUP CURRENT FILES:
This button will allow WinSafe98 to backup all your vital files. If 
WinSafe98 tells you that your Registry or system files have changed and 
you computer is not performing properly ignore the message to backup until 
you have fixed your system. To save a newer version of Vmm32.vxd use the 
Menu Item Save Vmm32 first and then click on Backup Current Files. 

BOOTLOG:
This button will search the bootlog file for failed to load files due to 
corruption, missing files or conflicts. You can replace the corrupted files 
or edit the Registry to fix these files. 

CHECK REGISTRY:
Will tell you the size of the Registry in bytes as of the last bootup that 
WinSafe98 logged (by using the Set Boot Option) and the size of the current
 backup Registry. If you click yes to the message window the file Detail 
Report will be displayed. 

DEFRAGMENT:
This selection accesses the DEFRAG utility which defragments your files. 
Fragmented files are scattered all over the hard drive. This condition 
slows your computer. Running DEFRAG reassembles defragmented files into 
contiguous sectors. This generally speeds up your computer. You should run 
defrag at least once a week. 

EDIT SYSTEM:
This selection accesses the system files for editing. You can access the 
Win.ini, System.ini, Autoexec.bat, Config.sys, Protocol.ini, and MSMail.ini.
CAUTION: Improper editing of some of these files may cause problems. 

EDIT REGISTRY:
This selection accesses the Registry for editing. CAUTION: Editing this 
file incorrectly may crash Windows. WinSafe98 can rescue you from a 
corrupted Registry. If you edit the Registry be sure to reboot before 
attempting to backup. 

EXTRACT: 
This selection searches for and extracts a file from the Windows 95/98 
cabinet files. It can also extract any file from any cabinet file. 

FILE REPORT:
This selection commands WinSafe98 to inspect your system and compare it 
with the system information it collected when you last successfully booted 
to Windows. WinSafe98 will then tell you what files have been changed, 
added or deleted. The last report may be viewed any time with View File 
Report. These feature checks system files including all the Ini files in 
the Windows folder. 

HARDWARE:
This utility will list all the information that you will need for 
diagnosing a hardware problem. It can be set to view those devices with
problems only. It will display all class items and describe the fault with 
the hardware item. This will make it easier to repair then using the Device 
Manager. 
If you setup a Generic printer, text only, you can print the file the 
hardware utility creates to the Winsafe directory and save as 
"Hardware.prn". WinSafe will then add a Menu Item to the Files list for 
easy access.

MSD:
This button accesses the MSD utility, a diagnostic tool, used to diagnose 
problems with Windows 95/98 hardware, system files, Com ports, networks and 
more. This file is available on your CD. If you do not have a CD, you can 
download the file from the Internet. If MSD starts twice when you click the 
MSD button you will need to remove the File MSD.exe located in Windows or 
Windows\Command folder. If you download this file be sure to expand the file
MSDzip.exe first then copy just the file MSD.exe to the WinSafe folder. 
Make sure that you only have one copy of MSD.exe on your computer, or 
Windows will run two copies at a time. Coping this file to WinSafe does 
many things, mainly if you are in Msdod mode you need not be going back and 
forward to the Windows folder to find the problems in a crash. Every thing 
will be available at the WinSafe prompt.

REPAIR SYSTEM FILES:
Use this button to repair errors received at boot up that system files have 
been changed. This will install the original system DLL and drv files. This 
will also restore the Vmm32.vxd file. 

REPAIR SYSTEM ICONS:
This will restore you icons. Use this when your icons become unassociated 
or they are displayed incorrectly. 

RESTORE WITH CURRENT:
This button will allow WinSafe98 to replace all your vital files with 
WinSafe98's backup files. You can use this feature to aid in uninstalling a 
program that was registered in system files if you have not backed up since 
the installation of the program you wish to remove. To restore the Vmm32.vxd 
file use the Repair System Files button.


RESTORE WITH CURRENT 
is the FIRST utility to use if your Registry becomes corrupted. 

RESTORE FROM SAFE:
Use this feature when you have accidentally backed up with a corrupted 
Registry. This will install an earlier version of the system files. You 
should update the files in the Safe about once a month by using the Menu 
Item Save Old Configuration.
RESTORE FROM SAFE is the utility to use if RESTORE WITH CURRENT fails.

RESTORE WITH ORIGINAL:
This feature should only be used as a last resort in correcting the system. 
This will install the Registry that was created the last time you installed 
Windows 95/98. This feature is only available if you have not deleted the 
needed file. 

SCANDISK:
This button accesses Scandisk, used to repair errors and unlocks your hard 
drive. 

SYSTEM INFO:
This Microsoft utility will display system information about running 
modules, memory, processor, printer info, and much more. TIP: At a time 
when your system is running well, print a copy of this report for future 
reference. 

SYSTEM REPORT:
This feature will create a report from the VIRUS SCANNER, MSD, and the 
BOOTLOG all combined for easy viewing and comparison with the report 
generated the day you installed WinSafe98. The original report can be 
viewed by selecting the Menu Bar Item Files and then View System Report. 
This feature is very useful when you are experiencing problems or just for 
a check up of you system. You will be able to view all the changes on your 
computer by comparing the original report and the current report.
Also read the MSD section. Contains information needed if you run into any 
problems using this button.

If you setup a Generic printer, text only, you can print this report file 
to the Winsafe directory and save as "System.prn". WinSafe will then add a 
Menu Item to the Files list for easy access.

MENU ITEMS
HELP

CRASH RECOVERY: 
Accesses the Restore file, which contains information on how to restore your computer if you crash. This file is written in plain text format so you may access it from DOS.

HELP FILE: 
Accesses this file. A plain text copy is also available for viewing from 
DOS.

FILES 
VIEW FILE LOG: 
Will display a list of files that WinSafe98 has polled the last time you 
booted to Windows. This is the list that will be checked when you use the 
File Report button. 

VIEW FILE REPORT: 
Displays the latest report generated by WinSafe98 File Report.

VIEW VIRUS REPORT:
Displays the report that the virus scanner made the last time you ran it.

VIEW SYSTEM LOG: 
This is the report that WinSafe98 made and saved when you installed updated 
or reinstalled WinSafe98. This report show the status of your system the 
date you made the first System Report.

RELOG: 
Makes WinSafe98 start a new log. This will over write the last log created 
at bootup, allowing you to create a new report without having to reboot. 
This is a valuable feature if you crash to Safe Mode, restore your files 
and still crash again. This log contains the list of file that WinSafe98 
will pole when you use the File Report.

DETAIL REPORT:
This is a comparison report on the sizes of certain files in Windows and 
in the WinSafe98 backup. If you get a message that a system file is 
corrupted you can view this report and look for a zero byte file in the 
first line of each file. If you find one replace it.

TURN TIPS ON: 
This turns the Tips Of The Day feature on and off. The tips pertain to 
restoring your computer, and preventing a crash. 

TROUBLE SHOOTER: 
This will access the Windows 95/98 help files and the Trouble Shooter for
diagnosing your problems.

TECH SUPPORT:
If you are a registered user, you may get free tech support. From here,
you can email us, link into our Web Site, get our telephone #, or obtain 
your Registration #.

If you crash and need help from EASY DESK Software, you will need your 
Registration #.

 RESTORE 

RESTORE: 
This Menu Item is the same as RESTORE WITH CURRENT button. Use it when your
 mouse is not working, you can use your keyboard. This will allow WinSafe98 
to replace all your vital files with WinSafe98's backup files. You can use 
this feature to aid in uninstalling a program that was registered in system 
files if you have not backed up since the installation of the program you 
wish to remove. 

RESTORE WITH CURRENT is the FIRST utility to use if your Registry 
becomes corrupted.

RESTORE FROM SAFE:
Use this feature when you have accidentally backed up with a 
corrupted Registry. This will install an earlier version of the system files.

RESTORE FROM SAFE 
is the utility to use if RESTORE WITH CURRENT fails.

RESTORED FROM DOS:
This command is only used after you have restored from the DOS prompt 
using either the WinSafe or the WinSafe1 command and you are still in 
Safe Mode but wish to install the Autoexec.bat and the Config.sys files. 
You would only use this command if your Autoexec.bat or Config.sys file 
contains some information that is required by your system to operate. 
WinSafe98 once rebooted to Windows successfully will detect the Restoration 
and attempt to make the needed repairs. You may also use this command if you
have selected the Boot Option Stop Boot.

SAVE OLD CONFIGURATION:
If you click on this Menu Item, the next time you use the Backup Current 
Files button you will save the current backup files to the SAFE. These 
files will be used if you choose the Restore From Safe feature or if you 
crash and need the WinSafe1 command at the DOS prompt. WinSafe98 will tell 
you when these files were last updated.

CLEAR CONFIGURATION SETTINGS:
This will remove the setting you set using the Save or Install Old 
Configuration commands. This will stop Winsafe from saving or installing 
these files.

WINDOWS BOOT OPTIONS
This opens a window to show you and allow you to change the way Windows
boots up. 

SAVE VMM32:
This command will allow you to backup the VMM32.vxd file 
(Virtual Memory Driver) the next time you Backup Current Files.
This file only needs to be updated if Winsafe tells you that the 
file has changed. It is also wise to reboot a few time to insure 
that you system is operating correctly and create and review a new 
bootlog before backing up this file. 

REINSTALL Windows 95/98:
WinSafe98 will reinstall Windows 95/98 using your cabinet files. This 
feature is also available at the DOS prompt See the Restore text. You must 
have the cabinet files and Setup program on your hard drive or on diskettes,
 as WinSafe98 does not load the CD drivers. To use this feature with your 
Windows 95/98 CD, you must have a Startup diskette first that loads your CD 
drivers. This driver disk usually comes with a new computer or new after 
market CD. If this feature was not enabled at the time you installed 
WinSafe98 then you may enable it at any time by clicking on this button. 

SETUP 

SETUP TEXT:
This option accesses the installation instruction file; Install.htm Here 
you will also find information needed to adjust the WAIT TIME at startup.

WINSAFE.INI:
Accesses the Initialization file for WinSafe98 if you need to edit it due 
to deleted files or adding files. Unless you are very familiar with 
WinSafe98, do not edit this file. 

WAIT TIME:

This command allows you to change the startup wait time for WinSafe98. 
See WAIT TIME.

START TEST:
Puts WinSafe98 in Test Mode also see TESTING 

TEST: 
For Tech support use only.

BOOT OPTIONS:
STOP BOOTUP:
This option will disable WinSafe98 from monitoring your bootup. You 
will no longer get the Please Wait message when you boot to Windows. 
WinSafe98 will no longer be able to tell when files change or which files 
have been added or deleted on a daily basis. If you select this option the 
Exit Windows option is also disabled.

SET BOOTUP ON:
Will turn on the bootup monitoring if you turned it off with Stop Bootup or 
System Only. If you select this option the Exit Windows option is also 
disabled.

SYSTEM ONLY:
WinSafe98 will monitor the Registry only. There will be no Please Wait 
message, but you must still have the Wait Time adjusted correctly for 
this feature. Set the Wait Time while using the Set Bootup. This feature 
is generally used on networks.

UTILITIES
EXPLORER:
Accesses the Explorer

MEMORY:
Will display a window that will show you your available memory. This
feature is handy when a program decides to rewrite your Config.sys and 
use all your computers memory.

TASKMAN:
This utility is great for Safe Mode when you can not access your start 
button, if you use auto hide or if the Explorer stops working after a 
system crash. If WinSafe is open, the Taskman can shut you down safely.

MSDOS:
This option accesses the MSDOS Window for use with DOS commands.

UNINSTALL WinSafe98:
This will uninstall WinSafe98.

DEVICE MANAGER:
This will access the Device Manager. It is useful for setting system 
configuration.

CONTROL PANEL:
Open various control panels that are likely to be the cause of your 
problems.

MOUSE:
Opens Mouse system control panel 

MODEM:
Opens Modems system control panel

ADD/REMOVE PROGRAMS:
This opens the Windows 95/98 Add/Remove Programs window. From here, you 
can make a system disk. This disk will not contain backup files for your 
system. It is for diagnosing crashes. 

AUDIO/VIDEO:
This opens the Audio and Video Control Panel for setting system 
configurations.


BACKING UP

Everything is working fine when you get the message Backup Complete after 
backing up with no error messages. 

After WinSafe98 has been successfully installed and setup, WinSafe98 will 
tell you that you need to backup your files, whenever a system file changes.
 You can check this by clicking the Check Registry size. Backup if the 
Registry size is changed.

Also see Wait Time 
Backup your files immediately after startup when prompted. Do this 
before installing anything or accessing any programs. NOTE: if you have
 recently installed a new program, delay backing up for one or two boot 
ups to insure that your new software is working and the system is stable. 
WinSafe98 will only let you backup all your files once after each Windows 
startup. If you wish to backup a second time, you must restart your computer 
first. This is to insure that you do not save corrupted files. 

ERROR MESSAGES

If you receive an error message after WinSafe98 has been setup read the 
Setup text file. If the error message is File Still In Use see Testing. 
If the testing process does not fix the error, see #3 below. 
If you receive error message during startup (rebooting) read the WAIT TIME 
section. If the Wait time adjustment does not eliminate the error, read #3 
below. 
Some files that have no attributes are in use by Windows at all times. 
If you locate the file in the Explorer and right click it and select 
Properties you may find that the only attribute check is Archive. 
If this is the case and you have already done the test with WinSafe98 
then you will need to edit the WinSafe.ini file. Add the file name in 
capital letters to the [FILES] section. Replace an available 
(1 - 10 =1 is available) line with the file name. example: 2=SYSTEM.TXT 
 

RESTORING
Restore only if you have a problem or you installed some program that you 
want to remove and did not back up since installation of that program. 
Alternatively, you may use the INSTALL OLD CONFIGURATION command. To 
restore files in SAFE MODE or a lockout read the Restore Text. To help 
fix the problem you should read the Restore text as it will help you 
diagnose what the fault is. 

RESTORE REGISTRY
If you find yourself in Windows and a message box telling you to restore 
DO NOT CLICK ON THE BUTTON yet. If you click this button now without copying
 the System.da0 and the User.da0 from the WinSafe directory to the Windows 
directory you may be installing a corrupted Registry again. WinSafe98 will 
rename your Windows System.da0 and User.da0 (these are the Windows backup 
copies) then restore with WinSafe. WinSafe will replace both the Registry 
and the Backup files. After you have restored with WinSafe reboot. After 
reentering Windows 95/98, the registry box may still be there. Now you can 
click on the Restore from backup that Windows is displaying.
Once Windows displays this message box it remembers and thinks that you 
did not restore. It will display this message until you click on the button
 and reboot.

If you restore the Registry and Windows 95/98 wants to come in Safe Mode 
try to choose Normal. If you come in under Safe Mode and if there is a 
message box that tells you to restore from Windows backup click on it. 
Windows will be copying the files you just restored with to the Registry. 
This will do nothing accept make Windows happy.

Note: When you restore the Registry with a file with a large byte size 
difference, Windows sees this as a corrupted Registry. After rebooting 
Windows will prompt you to restore with its backup files. WinSafe has 
already replaced both the Windows backup of the Registry and the Registry.

Windows 95/98 may display the message box after rebooting a few times. 
If after at least three times the problem persists, you will need to 
install an earlier version of the Registry. You will n then did to use 
the Restore From Safe.

HOW WinSafe98 WORKS

WinSafe98 uses an installation program that sets up its' own directory; 
backs up all your vital files and then hides them with attributes so that 
you may not be able to see them. WinSafe98 also placed additional backup 
files in the "Safe" when you installed it. The Safe is a hidden subdirectory 
of Winsafe. In the Safe is a copy of the Registry, Win.ini file and your 
System.ini. WinSafe98 will never replace these files unless you request 
SAVE OLD CONFIGURATION. They are placed here for you to use if you should 
ever backup with corrupted files.
WinSafe98 also takes a picture of your system and saves the current 
information in a log. The information is stored until you restart your 
computer again and replaced with a new log. This log will not be replaced 
if you boot into Windows in Safe Mode. If you use the RELOG command 
WinSafe98 will start a new log.

To view changes made to your system since you last booted to Windows 
click on the FILE REPORT button and when WinSafe98 finishes reviewing 
the log and your current system it will display the information. You can 
then see if any changes were made to your system files since you last 
booted into Windows successfully. This may take a minute or two.

What Is the Safe?
The Safe is a hidden directory that you may view only if you have selected 
the option in the Explorer under View/Options. This directory contains four 
files that were placed there when you last installed WinSafe98. These are 
the files that are installed if you select RESTORE FROM SAFE these files 
can also be updated by selecting Save Old Configuration. 

GLOSSARY
Compressed Drive: Under Windows 95/98, a COMPRESSED drive is a virtual 
drive whose data resides in a file that is located on a HOST drive. This 
file is called drvspace.###, where ### is a number like 001. The virtual 
drive may appear in My Computer as any drive you choose, including the 
C: drive. Use the MSWindows 95/98 program Drivespace3 to create and manage 
compressed drives.

Crash: A term used to reference the various causes of a computer or one of 
its components, to fail or refuse to operate. Most simple problems with a 
program or device can be fixed by simply rebooting the computer or clicking 
on a First-Aid type Fix-It button. Serious physical problems such as fire or 
head crashes usually require component replacement. 
In between are the Windows 95/98 OS problems that occur when an important 
system file becomes corrupt that does not fix itself by simply rebooting. 
This is where WinSafe98 comes to the rescue. 

Empty Drive: An empty drive is like a compressed drive with one important 
difference. An empty drive is not compressed. Like a compressed drive it is 
a virtual drive whose data resides in a file that is located on a HOST drive.
 For all practical purposes, it is a drive partition.

Menu Bar Item: The words that are at the top of the interface, Files, 
Restore, Setup, Utilities, and Help.

Menu Item: The item list found under each of the Menu Bar words.

OS (System): The special software that enables all your hardware and other 
software to communicate is called the Operating System (OS). WinSafe98 was 
created to protect your Operating System (Windows 95/98) from software 
disaster. It is also simply referred to as the system.

Taskbar & Tray: The graphical device on the Windows 95/98 desktop with the 
Small Windows Flag on the START Button.
The Tray is a small area near the Clock with tiny icons for Volume Control, 
System agent and any number of other items, including, if you have them, 
Background Virus Check, and other Utilities.

Windows: Windows is a loose term that can mean different things. 

A Window is a graphical box that appears in a screen. It can feature 
independent properties. In Windows 95/98 the screen is known as the desktop. 
Windows 95/98 is the operating system of your computer. (Unless you have 
DOS, Apple, Amiga, NT, OS2, UNIX, Linux or other OS.) Windows is the name 
of the directory or folder in the Windows 95/98 OS that contains the files 
needed to operate your computer

REMOVING FILES FROM VMM32

If you should ever need to remove a file from the VMM32 list, files that 
the Extit Icon part of WinSafe reports as deleted you will need to edit the 
WinSafe.ini.

You can do this on of two ways, first ways is to remove the file and its 
size then lower the set number by one; or the easiest way to to remove the 
entire [FOLDER] section then save the file, WinSafe will rebuild this 
information with the files that now exist in the vmm32 folder.


  
