 Initialize Port ͸
                                                                      
 Modem Name   : Cardinal v.32 MNP  NON v.42                           
 Port #       : 1                                                     
 Port's IRQ   : 4                                                     
 Base address : 03F8                                                  
 Baud rate    : 9600                                                  
 Modem delay  : 2500                                                  
 Reset command: AT &F                                                 
 Setup # 1    : AT E0                                                 
 Setup # 2    : AT V1 M0 S2=255 S7=30 S0=0 X1 &I1 &H1                 
 Setup # 3    : AT &B1 &M4 S46=7 &C1 &D2                              
 Write NRam   : AT &W                                                 
 Dump  NRam   :                                                       
 Notes        : This setup is NOT for the v.42 model                  
                                                                      
                                                                      
                                                                      
     F2 - Save Record      F3 - Load Record      F10 - Open Port      
                                                                      
;
 MDM Record - Part 1 ͸
                                                                      
   1. Communications port number             : 1                      
   2. Communication port IRQ                 : 4                      
   3. Communication port base address        : 03F8                   
   4. Determine ringing using                : Ring result            
   5. Determine baud rate using              : Result code            
   6. Initialize port at what baud rate      : 9600                   
   7. Lock DTE at initialization baud rate   : Y                      
   8. Use CTS/RTS flow control               : Y                      
   9. Number of seconds to wait for carrier  : 30                     
  10. Milliseconds before answering          : 1000                   
  11. Milliseconds to lower DTR for hangup   : 2000                   
  12. Milliseconds to delay before prelog    : 1000                   
  13. Milliseconds to wait for result code   : 2800                   
  14. Milliseconds between command strings   : 1500                   
  15. Trigger level for FIFO                 : 8                      
  16. Is this a X.25 PAD                     : N                      
                                                                      
     F2 - Save Record      F3 - Load Record      PgDn - Part 2        
                                                                      
;
 MDM Record - Part 2 ͸
                                                                      
   1. Verbal code for RING           : G                              
   2. Verbal code for   300 baud     : CONNECT                        
   3. Verbal code for  1200 baud     : 1200                           
   4. Verbal code for  2400 baud     : 2400                           
   5. Verbal code for  4800 baud     : 4800                           
   6. Verbal code for  9600 baud     : 9600                           
   7. Verbal code for 14400 baud     : 14400                          
   8. Verbal code for 19200 baud     : 19200                          
   9. Verbal code for 38400 baud     : 38400                          
  10. Verbal code for 57600 baud     : 57600                          
  11. Modem error correction codes   : ARQ|MNP|LAP|CLASS|ALT|V.32|    
  12. Modem on-hook string           : ATH0                           
  13. Modem off-hook string          : ATH1                           
  14. Modem reset string             : ATZ                            
  15. Modem initialization string    :                                
  16. Modem answer string            : ATA                            
                                                                      
     F2 - Save Record      F3 - Load Record      PgUp - Part 1        
                                                                      
;
