
     Most  software  used  with Zoom/modems should be set  with  the  setup
STRING for a Hayes Smartmodem 2400, typically this is >>> AT&F&C1&D2 <<< or
pick Hayes 2400 from the selection. All PCs need the &C1&d2 in the  string.
If any software has saved a string and uses ATZ for an init, type AT&F&W in
terminal mode to restore to factory defaults. Then remove the ATZ & type in
a correct string for that software. Use XON/XOFF flow, or NONE.

     If  you  have a Hi-speed Zoom modem (V series), use the  same  string.
Then  lock  DTE BPS 19,200, set CTS/RTS flow. In some cases you  also  want
S95=1  (to pass true connect speed, default is 0 which passes  DTE  connect
speed).

     All   Zoom external modems use standard RS232 connections. A standard
straight through 25 pin cable, or standard 9-pin to 25 pin cable is used.

                               Don Hinds - Zoom Tech
##include=c:\text\signa.tif
