'
'These are language-dependent text blocks.  Large blocks of text that the
'user see's.
'
'Each line contains a number in the first two columns, the text follows that.
'Don't put comments in the middle of blocks--only before and after.
'
' For translations of the "x" codes see LINES.TXT.  For translations of the
' "[xxx" codes see the docs (standard ANSI codes).
'
'
'
' Text for User Toggles.
'
'the 'letter' line, followed by 5 line 'pages'.
' |----------------------------------------------------------------------|
01[37mA. [0;36mBeep after uploads or downloads are completed.
01[37mB. [0;36mEntering mail: show line numbers.
01[37mC. [0;36mReading mail: show total lines at the top of the message.
01[37mD. [0;36mReading mail: no screen clearing if message is not to you.
01[37mE. [0;36mShow the last few callers screen at login.
01[37mF. [0;36mLogin: password assist ("first letter is...").
01[37mG. [0;36mShow L&D/Point values when viewing on-line lists.
01[37mH. [0;36mActive (beep) grammar checking when entering messages.
01[37mI. [0;36mReading mail: show number of replies the message has.
01[37mJ. [0;36mReading mail: show number of times the message was read.
01[37mK. [0;36mReading mail: show the date the message was last read.
01[37mL. [0;36mEntering mail: show total number of characters.
01[37mM. [0;36mEntering mail: show total number of words.
01[37mN. [0;36mEntering mail: show total number of lines.
01[37mO. [0;36mAvatar support by your communications program.
01[37mP. [0;36mGender: you are a male (otherwise a female).
01<start>
01A. Beep after uploads or downloads are completed.
01
01A beep will sound when you complete a file transfer.
01
01
01
01B. Entering mail: show line numbers.
01
01When entering a message, you can have it not show the line numbers.
01
01
01
01C. Reading mail: show total lines at the top of the message.
01
01If there are more than 10 lines in the message, then it will show the
01number of lines in the message at the top of the message. 
01
01
01D. Reading mail: no screen clearing if message is not to you.
01
01To speed output of messages, you can have it not do a clear screen and
01bring up the reading messages command line, but instead just race
01through all the messages. 
01
01If the message is TO or FROM you, however, it will stop and bring up the
01command line. 
01
01When ON, you want paged message reading.  When OFF you want continuous
01message reading. 
01E. Show the last few callers screen at login.
01
01If the sysop has a "show last few callers" command either in a menu or
01in their logon loop, then if you turn this OFF, that command will not
01show anything (it will be skipped).
01
01It is useful when you would rather not be bothered with the information.
01Some login loops of commands can get quite long--and quite tiring for
01frequent callers--this helps a little. 
01
01
01F. Login: password assist ("first letter is...").
01
01If you don't call a lot--you will probably forget your password.  When
01this is ON, if you get your password wrong, it will give you the first
01character as a hint. 
01
01If this is OFF, it will not give you the hint unless you have not called
01in over 30 days.  Then it is assumed you probably forgot the password
01and really could use the hint. 
01
01
01G. Show L&D/Point values when viewing on-line lists.
01
01If you are interested in the L&D system, and the values that the files
01are currently at, you can show them by having this ON. 
01                     
01Similarly, if you don't care, you can turn this OFF--speeds up listing
01of the contents of the files area a bit. 
01
01
01
01
01H. Active (beep) grammar checking when entering messages.
01
01When this is ON, then when you are entering the text for a message, each
01word is spell-checked.  When the word is not found, you will hear a
01beep.
01
01You can toggle this ON and OFF while entering a message by typing a
01"//G" (no quotes). 
01
01
01
01I. Reading mail: show number of replies the message has.
01
01When reading messages, you can see the number of replies the message has
01gotten so far. 
01
01
01J. Reading mail: show number of times the message was read.
01
01When reading messages, you can see the number of times the message has
01been read so far. 
01
01If it has not yet been read, nothing is shown.
01K. Reading mail: show the date the message was last read.
01
01When reading messages, you can see the date the message was last read by
01someone. 
01
01If it has not yet been read, nothing is shown.
01L. Entering mail: show total number of characters.
01
01When entering a message, you can show the total number of characters the
01message uses just before the command line. 
01
01
01M. Entering mail: show total number of words.
01
01When entering a message, you can show the total number of words the
01message uses just before the command line. 
01
01
01N. Entering mail: show total number of lines.
01
01When entering a message, you can show the total number of lines the
01message uses just before the command line. 
01
01
01O. Avatar support by your communications program.
01
01If your communications program supports Avatar screen codes, then you
01should set this ON, and then set the appropriate toggle on your end.
01It does improve speed.  If the ANSI art gets screwed up, however, then
01turn it OFF again.
01P. Gender: you are a male (otherwise a female).
01
01This is used in some door programs. 
01
01<end>
'
' Text for Skill Exchange.
'
02
02
02[0;32mThis is a list of users and their fields of specialty.  Actual
02professions--usually the major you graduated with in college.
02
02You should include your name and skill in this list.  Others may then elect
02to ask you questions concerning an aspect of your field.
02
02Do not list your field if you are not qualified--that is, you should be able
02to stand on your own in a discussion with another of your profession/field.
02You need to be at least a senior in college or graduated a technical school
02before you can claim to be qualified in that field.
02
02
02[1;32mL[0;36mist all entries, [1;32mA[0;36mdd/[1;32mU[0;36mpdate your
02 entry, or [1;32m[Enter][0;36m to quit?  [1;37m
'
' Text for Requests.
'
03[0m[2J[44m                                   [0;1;31m Requests [44m                                   [0m 
03
03[1;32mRequests are put into the DL request list.
03
03[0;32mTwo formats exist:
03
03[1;32m     1[0;32m) To make a request to all users.
03        (eg.[1;32m A USER NEEDS:  dr_doom.zip - the arcade game.[0;32m)
03        (eg.[1;32m A USER NEEDS:  docs for dragon wars.[0;32m)
03
03[1;32m     2[0;32m) To make a request for a file that is off-line.
03        (eg.[1;32m ANYONE, PLEASE TARGET UPLOAD "btlchess.zip" TO John Doe.[0;32m)
03
03[0;36mEnter [1;32m1[0;36m, [1;32m2[0;36m, or [1;32m[Enter][0;36m to quit :  [1;37m
'
' Text for Reviews.
'
04[0m[2J[44m                                   [0;1;31m Reviews [44m                                    [0m 
04
04[1;32mReviews are put into the review file that follows the area listings.
04If you had uploaded the file, then you may also modify its description.
04
04[0;32mReviews are short notes about files that are on-line.
04
04! will use the reviews (in addition to the descriptions) to help determine
04which files need unprotects and which should be taken down.  Fellow users will
04use reviews to decide if the program is worth downloading, whether it might
04not work, or is incomplete.
04
04[12C-12[1;32mFile name :  [37m
'
' Text for message downloading transfer list commands.
'
05
05[1;32mc       [0;32mclears out the previous entries.
05[1;32mall     [0;32mincludes all messages.
05[1;32mnew     [0;32mincludes all new messages.
05[1;32mir:x-y  [0;32mincludes message numbers ranging from x to y (y is optional).
05[1;32mer:x-y  [0;32mexcludes message numbers ranging from x to y (y is optional).  You may
05        first include a message, then exclude with this command.
05Example: 'new ir:1-100 er:50-50'.  This includes all new messages, and message
05         numbers 1 to 49, 51 to 100.  If 50 is new, it's still excluded.
05Note: "everywhere" for selections 1 and 2 mean "every toggled ACTIVE area".
05
05
'
' Text for Message Area Toggler.
'
06
06
06[0;32mToggle ON/OFF (make active/inactive) message areas.
06
06Only New Stuff and Read The New Mail are affected.  It doesn't stop you
06from entering the message areas, or receiving mail to you.
06
06
'
' Text for Target Upload.
'
07[0;32m>Do an uncredited specific upload to a user.  A message will automatically be>
07sent to the user you name telling them that you uploaded the file for them.>
07The transfer will be done using BiModem, and it expected that you'll also be>
07downloading at the same time.>
07>
07[19C-30[1mFile is for whom :  [37m
'
' Text about Rambles.
'
08
08
08[0;32mRambles are files containing ramblings.
08
08A rambling is a message about the ramble topic.
08
08Similar in principle to threaded messages that share a common theme.
08
08Anyone level 10 or higher may start a ramble.  Those who do start one may
08also set a minimum security level in order to block others from seeing it.
08They may also delete it.
08
08
'
' Text for forced password change request.
'
09
09
09[0;32mIt's been a while since you last changed your password.  Please select a
09new password to better insure the security of your name.
09
'
' Text for File Attaches when entering messages.
'
10[15;2f[1;34;47m When you save the message, you will be prompted to begin uploading.[0K
10  If the upload is interrupted, you may select 'Give Attached Files' when[0K
10   reading the message to continue the upload, or to add more files.[0K
10  An alternative to selecting this: just begin uploading at the entering[0K
10   messages command line.  Your message will first be saved, then auto-[0K
10   detected uploading will be done.[0K
10  The files are deleted when the message is deleted.[0K
'
' Text for help with entering node addresses.
'
11[15;2f[1;34;47m#####:#####/#####.####@Domain        (The ":" and "/" can be anything.)
11 EXAMPLES:
11     1:154/900.0@Fidonet.org         ".0@Fidonet.org" is ignored.
11     1:154/900.0                     ".0" is ignored.
11     1:154/900@Fidonet.org           "@Fidonet.org" is ignored.
11     1:154/900                       Also works: "1.154.900" "1 154 900"
11       154/900                       "1:" is added.
11           900                       "1:154/" is added.
11 Will all address this BBS (1:154/900).  [Enter] will make the mail local.
'
' Text for top of peer review.
'
12
12
12[0;32mThe following is a request by a user for higher access.
12
12Should this user be accepted, he will be a level 5 user with access
12to the public file areas.
12
12
'
' Text for AI's "go fish" message.
'
13The information you have requested can be found either in the menu commands
13 themselves, or the BBS Information section.
'
' Call back verification text.
'
14>
14[0;32mCall-back verification of your phone number.>
14>
14That is, I will hang up, and call you.  If you are there, you will immediately>
14be given higher access.>
14>
14I will dial your Home Phone, or your BBS Phone if you have one.>
14>
14The procedure is as follows:>
14  1. I hang up.>
14  2. I call you.>
14  3. You type [1;33mATA[0;32m and hit [Enter] when the phone rings.>
14  4. Answer the question I give you with[1;33m 
'
' Output format specs for file area contents listings.
'
' Structure:
'   15001  'comment
'   15Data line 1 for heading.
'   15Data line 2 for heading.  Text on this line is optional.
'   15Data line 3 for heading.  Text on this line is optional.
'   15Data line 1 for contents listing output.
'   15Data line 2 (extended info line 1).  Text on this line is optional.
'   15Data line 3 (extended info line 2).  Text on this line is optional.
'
' Remember that each file area has a field for "output spec type" for each
' output method (continuous and paged).
'
' The output lines template codes are:
'
'  Char             Justified
'  / LenForm     / Example  What
'  A   8  XXXXXXXX  L  FILENAME  File name
'  B   3  XXX       L  EXT       File extension
'  C                             reserved for ANSI [xC jumps.
'  D   9  #,###,### R  9,999,999 File size in bytes with comma separators
'                                see SHORT 242 to change comma colors
'  E   9  #.###.### R  9.999.999 Same as D, see SHORT 245 to change colors.
'  F   7  #######   R  9999999   Same as D.
'  G   5  #,###     R  9,999     File size in k with comma separator.
'                                see SHORT 242 to change comma colors
'  H   5  #.###     R  9.999     Same as G, see SHORT 249 to change colors.
'  I   4  ####      R  9999      Same as G.
'  J   2  XX        L  fp        File attributes--colorizing is added if
'                                non-blank (locked in, but more effient).
'                                See SHORT 249 to change the letters used.
'  K                             reserved for ANSI [0K command.
'  L   6  ######    N  041092    Date file was uploaded to the BBS.
'  M   3  |x#       L  |+5       L&D/file points/etc.
'  N   9  ##-XXX-## R  10-Apr-92 Date file was uploaded to the BBS.
'  O   30 XXX<30>XX L  John<etc> Uploader's name, case adjusted.
'  P   4  ####      L  99        Number of times downloaded.
'  Q   9  ##-XXX-## R  10-Apr-92 Date the file was last downloaded.
'  R   1  X         N  A         File-letter-on-screen   [A - R, for PagF only]
'  S   12 XXX<12>XX L  FILE<etc> File name and extension with period.
'  T   9  ##-XXX-## R  10-Apr-92 File's actual date
'  a   8  xxxxxxxx  L  filename  File name
'  b   3  xxx       L  ext       File extension
'  f                             reserved for ANSI [x;yf position codes.
'  m                             reserved for ANSI [x;y;x;wm color codes.
'  p   4  ####      R  9999      File Point values.  If L&D/FP field of the
'                                file is 100-255 then this value -100 is used.
'                                Otherwise the Bytes->FP conversion is used.
'  r   ?  <cr/lf><> N  <review>  Display this files review(s) on the next line.
'                             example: 15[1;36mA B[32m  DJ[0;35mT [36mZr>
'                             could replace Type 001.
'  $                             at position 1, means "no not reduce spaces".
'  Z   Description field--use's whatever's left of the 79 char's
'      When figuring the length to use, all spaces are counted against
'      it and taken into account (those in the original spec)--however
'      any non-space/non-ansi chars are not--to compensate, add extra
'      spaces at the end.  Eg. "BZ>" should be "BZ  >"  You must
'      put the spaces just before the ">" of the line to which the graphic
'      characters are associated, or the software won't notice them.  All
'      lines are trimmed, so the end spaces never get outputted.
'      Desc (Z) must be on first line, and not on any other lines.
'  For "text to not process": enclose the text in ~'s.  If you do not,
'  then it will think of that protected text as more template codes.
'
'  Thus, the template spec has 6 things:
'    Template codes (A-Z, a-z)
'    ANSI codes (mostly color change codes)
'    Protected text (~text~).
'    Spaces
'    Non-template codes (ASCII chars that are not A-Z/a-z, like ,, etc."
'    ">" for CR/LF's.
'
'  You can leave lines blank, and you can put all 3 together on one line.
'  However, the first ">" marks the boundary between a simple listing line,
'  and the extended information lines.
'
'
'  The header templates follow the same rules as above.  Codes are:
'
'  Char             Justified
'  / LenForm     / Example  What
'  A   ?  XxxxXXxxX N  Area One  Area title as you have it.
'  B   ?  XXXXXXXXX N  AREA ONE  Area title upper-cased.
'  C                             reserved for ANSI [xC forward jumps.
'  D                             reserved for ANSI [xD backward jumps.
'  E   ?  XxxxXXxxX L  Area One  Area title as you have it.
'  F   ?  XXXXXXXXX L  AREA ONE  Area title upper-cased.
'  G   ?  ###       N  6         File area's number (adjusted appropriately
'                                to hide user-inaccessible areas).
'  H   ?  ##        N  56        A number representing 79 - LEN(Title)
'  I   ?  ##        N  20        A number representing LEN(Title)
'  J                             reserved for ANSI [2J command (clear screen).
'  K                             reserved for ANSI [0K command (clear to EOL).
'                                to hide user-inaccessible areas).
'  L   ?  ###,###   N  1,200     Number of files in the area.  For LstF
'                                commands, or file areas which listing is done
'                                from newest to oldest, the number will
'                                instead be the number of files in all areas.
'
'
'  The first 3 lines are for the title/heading output, the second 3 lines are
'  for the listing of files themselves.
'
'
15001  '#####Type 001 is fairly normal continuous style.
15>>[1;36;41m~[Space] to pause, [Enter] to stop.~[0m>>[1;37m  A>>
15
15
15[1;36mA B[32m  DJ[0;35mT [36mZ>
15[0;32m[25CN ~by~ O>
15[25C~Times downloaded: ~P    ~Last DL:~ Q>
15002  '#####Type 002 is fairly normal paged style.
15[0m[2J[1;37mF[1;77f[1;37m #G>
15[1;34m>
15
15[1;31mR [36mA B[32m  DJ[0;35mT [36mZ>
15[0;32m[27CN ~by~ O>
15[27C~Times downloaded: ~P    ~Last DL:~ Q>
15003  '#####Type 003 is like 001, but no file date on primary line (longer desc's).
15>>[1;36;41m~[Space] to pause, [Enter] to stop.~[0m>>[1;37m  A>>
15
15
15[1;36mA B[32m  DJ[0;36mZM>
15[0;32m[25CN ~by~ O>
15[25C~Times downloaded: ~P    ~Last DL:~ Q>
15004  '#####Type 004 is like 002, but no file date on primary line (longer desc's).
15[0m[2J[1;37mF[1;77f[1;37m #G>
15[1;34m>
15
15[1;31mR [36mA B[32m  DJ[0;36mZM>
15[0;32m[27CN ~by~ O>
15[27C~Times downloaded: ~P    ~Last DL:~ Q>
15005  '#####Exec-pc style.  No extended info lines.
15[0m[2J[0;1;32m~  Collection:  ~A>  ~Showing   :  All Files, ALPHABETICAL Order~>
15[0;1;33m  ~Filename     [0;1;32mSize   MMDDYY [0;1;36mDescription ("[0;1;37m+[0;1;36m" means there is extra info)~
15[0;1;5;31m~Exec-PC~>[0;1;31m      ~Total Files:~ [20DL [C>
15[1;37mR [33mS[32mF LJ[1;36mZ>
15
15
15006  '#####Type 006 is a more graphical paged style.
15[0m[2J[1;37;43m#G[1;37;44m[0K[1;HfF>[41m[0K>
15
15
15$[0;31;47mR[1;30;40m[0;34;47mZ[1;30;40m[0;30;47mA B[1;30;40m[0;35;47m FJ[0;33;47mT[0m   >
15 [1;30;40m[47m~by~ O           [40m[47m~DL'd: ~P ~Last was:~ Q[0m>
15
'
' Text (all, complete, entire) for the Toggle system.
'
16User related togglesSystem related togglesMessage related togglesAI's brainSystem related toggles 2
16
16
16
16
16
16
16
16
16)?                       [30m[22C
16|[22;2f[1;30;44m                        [36mHelp on which option (A - 
16|
16[32;40m       
16[31;40m       
16-+?
16[C[1;30;44m                [Enter] to exit, '?' for help on the options                >
16[1;32mWhich would you like to alter ([Enter] to quit):
16>>
16[C[1;30;44m                                                                            >
16<start>
16[30m>
16[C[30m
16[31m
16[30m+[32m
16[30m-[32m
16 [32m
16<end>
16[19;1f[1;44m
16.
16[0;30m[2J
16|
16ABCDEFGHIJKLMNOP
16   
16 >[19;1f
16[1;32m[30m[11C>
16[1;31m[30m    >
'
' Text for Message Editing (substitution) help.
'
17|~|[0K>
17[0;32mA simple exact match search and replace.  Only the first occurance is replaced.>
17[Enter] at "text to look for" to stop.  [Enter] at "text to replace" to delete.>
17"||" (no quotes, search and replace) can be used for a CR/LF.>
17"*LINES*<ret>" (in search only) can be used to toggle "Line Numbers".>
17You are limited to 78 characters.  Remember the "Insert lines" command for>
17when you want to add lots of new text.>>
'
' Text for User Toggles 2.
'
'the 'letter' line, followed by 5 line 'pages'.
' |----------------------------------------------------------------------|
18[37mA. [0;36m[Not Used]
18[37mB. [0;36mEntering mail: show total time and CPM rate.
18[37mC. [0;36mReading mail: confirm before deleting messages.
18<start>
18A.
18
18
18
18
18
18B. Entering mail: show total time and CPM rate.
18
18When entering messages, you can have the software display the time it
18took you so far, and the CPM (characters per minute) rate, for you to
18enter the message.
18
18C. Reading mail: confirm before deleting messages.
18
18When reading messages, you can have the software ask you to confirm the
18deletion of a message before it actually deletes it.
18<end>
'
' Language menu information.  The first line contains the text to display
' before the menu.  The second line is the question text after the menu.  The
' third line asks them if what they're using now can display VGA graphics.
'
19
19
19You have a GIP compatible communications program, right
'
' Text for Reading Messages (READMSGS.BAS &  READMSG2.BAS).
'
20|N~|[0;32mActive messages range from[36m
20[32m to[36m
20[0;32m, with[36m
20[0;32m, with no new messages.>>
20[0;32m, with[36m one[0;32m new message.>>
20[0;32m new messages.>>
20[1;37mPrevious
20[1;37mNew
20[0;32mNo messages found.*
20DFECGVANPRQ/!US?*&^@#>
20DFECGVANPRQ
20%%%
2011
20[1;37mNext>
20[1;37mDeleted
20[1;37mDelete>>[32mConfirm: Delete this message
20|N~|[0m[1;32mMessage number[0;36m, [1;32mN[0;36mew Messages, or [1;32m[Enter][0;36m to return to menu :  [1;37m
20000
20>>[1;32mAppend message to pathname :  [37m
20[0;32mDone.>
20>>[0;32m
20>>>[1;33m     Start receiving now, or press <Ctrl-X> several times to abort. . .[0;32m>>>
20Give
20[1;37mReply
20All
20ALL
20[1;37mAgain
20[1;37mUser maintenance>>>
20[1;37mSysop DB
20>[s[0;31m (at end)*[u
20>[0;31m (at beginning)*
20Return
20>[62C[0;31m(number too high)*
20[1;37mQuit>
20>[0;31m (number too high)*
20Continue Message
20>>[0;31mNot enough drive space for a message at this time.>I'm sure ! will notice and fix it.  Please try again tomorrow.>**
20*.*
20Your message:
20[0;35m
20 [0;31m#
20 [36m
20[32m
20[0;33mWas read by 
20 on 
20.
20>>[1;32mU[0;36mser maintenance   [1;32m@[0;36m  Edit Msg Info[11C [1;32m*[0;36m  User & Msg --> Peer Review>[1;32mS[0;36mysop Database     [1;32m^[0;36m  Re-Inform user[10C [1;32m![0;36m  Msg --> New Msg Area>[18C [1;32m>[0;36m  Move All File Attaches   [1;32m&[0;36m  Msg --> File>[18C [1;32m#[0;36m  Kill All File Attaches   [1;32m/[0;36m  AI's "Go Fish" Reply>>
20[1;32m?[0;36m, 
20000000
20[1;32mD[0;36melete, [1;32mF[0;36morward, 
20[0;36mInitial message:[0;33m
20[1;32mE[0;36mdit, 
20[1;37mPeer Review>>
20[1;32mC[0;36montinue message, 
20[0;36mAdditional message:[0;33m
20[1;32mG[0;36met file, [1;32mV[0;36miew a file attach,
20[1;32mG[0;36met files, [1;32mV[0;36miew a file attach,
20[1;32mG[0;36mive files, [1;32mV[0;36miew a file attach,
20|
20~|
20>[1;32mA[0;36mgain, [1;32mN[0;36mext, [1;32mP[0;36mrevious, [1;32mR[0;36meply, or [1;32mQ[0;36muit 
20:  [1;37m
20area :  [1;37m
20\*.*
20[1;36m
20[0;36m
20 bytes
20[0;31m  (Free)>
20[1;32m>File Attached:>
20[1;32m>File Attaches:>
20[1;37mHeader Edit>>[0;32mUse this to edit the header information of the current message.>>[0;32m[Enter] leaves unchanged.>>
20 [[0m
20[1;32m
20[1;32m]:>[8C[[s[51C][u[37m
20[1;32mRe-locate to which message area ([Enter] to quit) :
20[1;32m]:  [37m
20>[0;32mRe-saving the message...
20[1;37mForward>>[0;36mForward this message to: [1;32mU[0;36mser, [1;32mM[0;36message area, or [1;32m[Enter][0;36m for neither :  
20[1;37mRe-locate>>
20UM
20[1;37mNeither>>
20[1;37mUser>>
20Nobody>>
20[1;37mArea>
20[1;32mWhich message area should get this message :
20[1;32mWould you like to leave a short note
20>[1;32mType your note:>
20[0;32mNo note added>
20***
20 notes:
20[1;32mThis note will be put into the message at the top.>Would you rather it be put at the bottom
20*** Forwarded from 
20 ***
20Subject:  
20***           by 
20  ***
20[1;37mAI's Go Fish Reply
20View>>[1;32mFile name of attached file to view :  [37m
20Get>>[1;32mFile name of attached file to download :  [37m
20[1;31m  Not found.>
20+|~|>>>[A[1;36;41m[Space] to pause, [Enter] to stop.[0m>>
20+|~|
20P
20BZ
20[1;37mMove FA's>>[32mMove the FA's to which dir :  [37m
20[0;32m
20[1;37mKill FA's>>Confirm: Delete all the file attaches to this message
20[1;32mWho should get this message :  [37m
20>>[0;31m  Compressed file.  Let's not.*
'
' Text (all, entire) for New Stuff.
'
21+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>>[1;31mNew messages:>>
21+|~|
21ALL                           
21Fellow Sentient Beings 
21+|~|[1;37m
21[36m
21[32m 
21 [35m
21+|~|[0;32m---none--->>>[1;31mNew files since your last call:>>
21+|~|>>[1;31mNew files since your last call:>>
21+|~|[1;36m
21[32m
21 [0;36m
21+|~|[0;32m---none--->>>[1;31mNew requests since your last call:[1;32m>>
21+|~|>>[1;31mNew requests since your last call:[1;32m>>
21|~|[44m [1;33;41m # [44m [C [1;33;41mFrom[44m                  [C [1;33;41mTo[44m                    [C [1;33;41mSubject[44m                 [0m>>
21+|~|[0;32m---none--->
'
' Text (all, entire) for Life & Death altering by users.
'
22>>[0;32mSorry, but you have already done your altering for today.>**
22>>[55C-12[1mFile name whose Life & Death Count you wish to alter :  [37m
22>[0;32mNo.  You are not allowed to modify your own uploads.>**
2276C[32m
22C[32m
22C[32m
22>>> [1;36;41m ? 1 2 3 4 5 6 7 8 9 -9 -8 -7 -6 -5 -4 -3 -2 -1 +1 +2 +3 +4 +5 +6 +7 +8 +9  >>>[s[8H[
22[u[0;32mDone.**
22ID
22Increase>>
22[0;32mCannot be increased further.  Not Altered.>
22Decrease>>
22[0;31m! has it turned off.>*
22[0;31mThere must be less than 
22 bytes of upload space.>*
22[0;31mYou must have/be level
22 or higher.>*
22[0;31mFile must be in uploads area.>*
22[1;32mConfirmation:  You would now like to delete "[0m
22[1;32m"
22[0;32mDone.>*
22[0;32mNOT deleted.>*
22Quit
222C?
22C
2276C
22C-
22C+
22[u[0m[1;32mI[0;36mncrease (+'ve), [1;32mD[0;36mecrease (-'ve), or [1;32m[Enter][0;36m to leave unchanged :  [1;37m
22
22[u[s[8H[
22[1;36;41m[s[8H[
'
' Text (all, entire) for fancy file displaying (boxing, paging, etc.).
'
23[0m[2J[44m
23[0;1;31m 
23 [44m
23[35;40mͻ
23[35m 
23+|~| [36m
23ͼ [0m
23] [44m
23|~| [36m
23[0m[2J
23>>
23+|~|
23+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>[1;31mLast updated:  
23>>
23+|~|[1;31m
23[0m[2J[44m
23[0;1;31m 
23  [
23/
'
' Text (all, entire) for Add A Request (to the post-file lists request list).
'
24Quit
2412
241>>[14C-38[1;32mA USER NEEDS:  [1;37m
24>>
242>>
24[0;31mSorry, but you need to be level
24 or higher.>**
24[
24ANYONE, PLEASE TARGET UPLOAD "
24C-12[1;32m
24[1;37m
24" TO 
24.
24[1;32m
24[0;32mDone.>
24[0;31mNot enough drive space to do a request at this time.>>I'm sure ! will notice and fix it.  Please try again tomorrow.>**
'
' Text (all, entire) for Exchanging of minutes & megabytes menu command.
'
25>>[0;32m?, you have[36m
25[32m minute credits, and [36m
25[32m download bytes available.>>[36m
25[32m download bytes were previously changed to minute-credits.>>
25[32m minute-credits were previously changed to download bytes.>>
25[0;32mConversions are either from 
25 bytes of downloads to
25 minute-credits>or
25 minute-credits to 
25 bytes of downloads.  Changes do not effect>stats.>>
25[0;31mNot enough download bytes to convert to minute-credits.>
25[1mWould you like to convert download bytes to minute-credits
25[0;32mDone.>*
25[0;31mNot enough minute-credits to convert to download bytes.>
25[1;32mWould you like to convert minute-credits to download bytes
'
' Text (all, entire) for Download command.
'
26>
26[0;32mUploaded: [36m
26 bytes   [32mDownloaded: [36m
26 bytes   [32mRatio:[36m 1:
26 [1;30m(1:
26>[1;31mSorry, ?, UL/DL ratio of 1:
26 exceeded already.>[0;32mMinimum upload of [36m
26[32m bytes required to download again.>
26>[0;32mDownload balance remaining before upload required: [36m
26 bytes>[32mDownload time remaining this call:[36m
26)
26 -
26 +
26>[1;31mNo matching files found.
26 =
26 minutes>[0;32m
26>>                [36m0 [32mfiles, [36m0 [32mbytes, about [36m0 [32mminutes at 
26 baud.>>
26[s[1;32mDownload the batch now
26[u[0K
26[1;36mDownload which file(s):  [37m
26[36m 
26[32m bytes, about[36m
26[32m minute
26[32m minutes
26  1 [32mfile,
26[32m files,
26 [s[8H[0;36m
26[u[1;37m
26[9;28f[1;31m(not enough time)**[9;28f[0K[u[1;37m
26[9;28f[1;31m(too many bytes) **[9;28f[0K[u[1;37m
26[u[1;37m
26[1;31mPost/Call ratio is out of balance.>[32mPost another message to be able to download.
26[1;31mUL/DL files ratio is out of balance.>[32mUpload another file to be able to download.
26 File Points>[32mDownload time remaining this call:[36m
26>>          [36m0 [32mfiles, [36m0 [32mfile points, about [36m0 [32mminutes at 
26[32m file points, about[36m
26[32m file points, about[36m
26[9;28f[1;31m(too many FP's) **[9;28f[0K[u[1;37m
'
' Text (all, entire) for Upload commands.
'
27
27ZMODEM
27BIMODEM
27HSLINK
27>>
27[0;32mI have only [36m
27 bytes [32mavailable.
27  Be sure it's enough.
27>>
27[0;32mI am sorry.  ! only allows Targeted Uploads if there are at least>
27 bytes available.  Do try again tomorrow.  Thanks.>
27Please note: all time spent in bidirectional protocols is considered to be>download minutes and is subtracted as such from your stats.>>
27H
27[0;32mYou have interrupted me, search aborted.>>
27[1;32mDo you wish to search for more
27 -=> 
27[1mWould you like to enter the description now? [y/N] [37m
27YN
27Yes>>[0;32mFor batch uploads all files will be given the same description.>>
27Please describe
27the upload(s)
27[0;32m
27>>>[1;33m     Begin uploading now, or press <Ctrl-X> several times to abort. . .[0;32m>>>
27[1;33mBegin BiModem on your end now, or press <Ctrl-X> several times to abort. . .[0;32m>>>
27[1;33mBegin HS/Link on your end now, or press <Ctrl-X> several times to abort. . .[0;32m>>>
27[13H[0;32mToday is 'Upload only bidirectionally.' day (BiModem or HS/Link), tomorrow>you can use one-way protocols.**
27I am sorry.  ! really would not like it if I was to let you try>to upload into such a cramped space.  Do try again tomorrow.  Thanks.>
27You are required to do a search of your potential upload.  See BBS Info for>specifics.  Remember the double-bytes-off penalty for uploading duplicates.>>
27[0m[2J
27CanDL
27elap  
27MinMeg
27MinCred
27SL 
27>>[0;31mSorry, ? but you have negative download time remaining today.>Try again tommorrow.>**
27B
27limit
27 /T
27not limited
27[0;31m>Sorry!  We're Full.  Try again tomorrow.  Thanks.***
'
' Text (all, entire) for the Searching of lists.
'
28[23C-10[1m    Text to look for :  [s[37m
28[u[s
28[u[s  
28AEIOUY
28>>[11C[0;32mNo.  There are too many files containing that.**
28+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>
28[32m" in 
28[36m>>
28[32m" in On-Line lists.[36m>>
28|~|>[0;32mSearching for "[0m
28[1m
28[0;36m
28+|~|
28[1;36mNo match found.>
28+|~|[1;36m
28>>[11C[0;32mSearching for a filename is not recommended.>**
'
' Text (all, entire) for Login getting of name and password.
'
29>>[1;32mPlease enter your full name :  [37m
29[1;32m      and your last name is :  [37m
29>>[0;32m
29[0;31mSorry!  But there isn't enough drive space to let you log on.>>Please call back later.  Thanks.>>>**
29[D[s[0;31m<password>*[1;37m[u[s          [u
29No space for a old user.
29New user wanted in.  User slots are full, or stop toggle was on.
29[0;32mAlas, I wasn't able to find your name in my databanks.>>
29No space for a new user.
29[0;31mSorry!  But there are too many users right now.>>Please try again next week.  Thanks.>>>**
29[1;32mYou really must enter your REAL name.>Truthfully.  Are you actually "[0m
29[1;32m"
29Unwanted name:  
29>[1;32mWhat is thy real name :  [37m
29%%%
29  Sorry about the name confusion.
29| Trapping of 
29's session on 
29 at 
29. |
29>>[41C-15[1;32m        What verification will you use :  [37m
29>[1;32mRe-Enter verification for confirmation :  [37m
29[42C[0;31mNOT Done.>[42C[32mAt least
29 characters, please.
291
29[0;31m[42CThey differ.[32m  Try again.
29Password changed from:  
29[42C[0;32mDone.*
29[1;32mVerification :  [37m
29--Password fail:  
29>>>[1;31mAlas.  Hacking !'s account is not recommended.>>***
29[0;32m  Incorrect.>
29Please try something with%1 characters, starting with an "[37m%2[32m".  >
29
29
29>[0;32m(Auto-name detection is now off.)>
29?
29>>[1;37mSorry, but you may only access one node at a time.>>**
29     [0;31mOK.  But now EVERYONE will have access to your account.***
29[0;31mHack attempt recorded.  You have a brain--use it.>
'
' Text (all, entire) for Call-Back Verification.
'
30[0;32m.>  5. I then give you higher access and you can continue your session.>>
30[1;32mShall we do this now with [33m
30[32m
30 passed call-back verification with 
30>[1;32mWhat phone number shall I use :  [37m
30>>[1;32mShall we do this now with [33m
30[1;32mIs this a long distance number
30>[0;32mNo, I will only do this for local numbers.>>
30>[36mBye.  See you in about 30 seconds...**>
30>>>>>[0;32m
30, what is your [1mVerification :  [37m
30>>[36mCorrect.>*
30>>[0;31mWrong.>>***
30 failed call-back verification with 
30.
30>[32mI will hang up now.  Call me to continue your session.>
'
' Text (all, entire) for the Welcome (after login) stuff.
'
31[0;32mPeer Review voting so far:
31 YES votes,
31 NO votes, and
31 who don't care.>
31[1;36mNote: [37m
31[1;32mYou have
31 download minutes remaining this call.>>
31| ~|[1;32mI'm sorry, ?, no mail for you this morning.>
31| ~|[1;32mI'm sorry, ?, no mail for you this afternoon.>
31| ~|[1;32mI'm sorry, ?, no mail for you this evening.>
31>[1;32mWould you like to see what the voters see
31[0;32mGood morning, ?, you've got mail in the following areas:>
31[0;32mGood afternoon, ?, you've got mail in the following areas:>
31[0;32mGood evening, ?, you've got mail in the following areas:>
31Adjustment, user high message fix: 
31[0;32m : 
31YNS
31>[1;32mRead messages now? [y/n] [37m
31>[1;32mRead messages now? [y/n/s] [37m
31[0m[0K>
31Scan>>[44m [1;33;41m # [44m [C [1;33;41mWhen[44m             [C [1;33;41mFrom[44m                  [C [1;33;41mSubject[44m                      [0m>
31                              
31[0;36m
31[1;31m
31[36m
31[32m
31 [35m
31No
31Yes>
'
' Text (all, entire) for the Archive manipulation system.
'
32>>[23C-12[1mFile name to work on :  [37m
32>
32[0;31mInvalid archive.>>*
32+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>
32>>>[1;33m     Start receiving now, or press <Ctrl-X> several times to abort. . .[0;32m>>>
32VTE
32[1;37mView Contents>>
32[1;37mTest Archive[0;32m>>
32%1
32[1;37mExtract>>
32[1;37mQuit
32PK
32Unknown
32Stored  Shrunk  Reduced1Reduced2Reduced3Reduced4ImplodedTokened Deflated
32Stored   m1 (best)m2       m3       m4       
32>>[0;32m
32...
32+|VTE~|[1;36m
32[32m
32[31m
32 [35m
32  [37m
32
32[0m
32[1;32m"? [y/N] [37m
32YN
32[0;31m  Sorry, not enough drive space.*
32[0;31m  Sorry, exceeds your can-DL limit.*
32Yes>
32[1;32mDo you wish to extract "
32>>[0;32mCreating extraction archive, hang on. . .
32>>[0;32mError creating archive.  Sorry.  Try again later or complain to !.***
32>>[0;32mFile name is 
32, and it has a size of 
32 bytes.>>[1mContinue with download
32[0m>[0K[A[44m [1;33;41mFile[44m                     [2C [1;33;41mSize[44m    [2C [1;33;41mReduced to[44m       [2C [1;33;41mDate[44m    [2C [1;33;41mMethod[44m  [0m>>
32>>[1;32mV[0;36miew contents again, [1;32mT[0;36mest, [1;32mE[0;36mxtract, or [1;32m[Enter][0;36m to quit :  [1;37m
32EXTRACT
'
' Text (all, entire) for List Users command.
'
33>>
33[1;32mName to search for ([Enter] for all users):  [37m
33[1;32mPoint out active users who have not called in how many days :  [37m
33+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>
33 [44m [1;33;41mName[44m                   [C [1;33;41mSL[44m   [C [1;33;41mDL Bytes[44m  [2C [1;33;41mUL Bytes[44m [C [1;33;41mMsgs[44m [C [1;33;41mLogs..not in[44m [0m>>
33|-~|[44m [1;33;41mName[44m                      [C [1;33;41mLocation[44m               [C [1;33;41mLast on[44m [C [1;33;41mCalls[44m [C [1;33;41mRatio[44m  [0m>>
33+|-~|[1;37m
33+|-~|[1;36m
33[32m
33[1;34m
33[1;35m
33[1;31m
33:
33+|-~| [1;36m
33+|-~|[0m*[1;36m
33[1;32m
33[0m n
33[0;32m---end users---   >
'
' Text (all, entire) for Callers Log viewing and searching.
'
34+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>
34                 
34+|~|[0;36m
34[1;31m
34[0;36m
34+|~|
34 from 
34[1m
34 at 
34[32m
34[36m
34|~|
34>>[0;32mIt's designed to find information about who uploaded a file.>If you enter part of a users name, you will only get when they called.>>[21C-49[1mText to search for :  [37m
'
' Text (all, entire) for the Skill Exchange/Fields of Expertise database.
'
35LAU
35...............................
35[0;32mEnter your field of specialty.>>[30C-47[1;36m
35+|~|[1;37m
35+|~|[1;36m
35[0m
35[0;36m
35Add/Update
351
35>>
35List>>+|~|[1;36;41m[Space] to pause, [Enter] to stop.[0m>>[44m [1;33;41mName[44m                         [C [1;33;41mField of specialty[44m                            [0m>>
35[0;31mNot enough drive space to add an entry at this time.>I'm sure ! will notice and fix it.  Please try again tomorrow.>**
35[s[0;33m
35[u[1;37m
35[1;37m
35[0;32mDone.>*
35Quit
'
' Text (all, entire) for the BBS Reviews system.
'
36[1;32mWhat is the phone number of the BBS:  [37m
36LA
36+|~|+List>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>[44m [1;33;41mName and number[44m    [C [1;33;41mReviews and information[44m                                  [0m>>
36>>[0;32mReviews and information about other BBS's.>>[1;32mL[0;36mist all entries, [1;32mA[0;36mdd a review, or [1;32m[Enter][0;36m to quit?  [1;37m
36+|~|[1;36m
36 [0;36m
36Add>>
36[0;31mNot enough drive space to add an entry at this time.>I'm sure ! will notice and fix it.  Please try again tomorrow.>**
36+|~|[20C
362
36[1;32mThe name of this BBS is:  [37m
36[29C-20[1mWhat is the name of the BBS:  [37m
36>>[1;32mReview:>
36--
362                    
36[0;32mDone.>*
36Quit
'
' Text (all, entire) for the Voting system.
'
37[0m[2J
37[0;32mQuestion number
37 of
37[33m>>
37Other
37No Opinion
37[32m. [33m
37[1;37m    [0;35m
37     [35m
37[
37C[31m
37[11C
37 Results  
37 from
37 voters.  
37[10C
37[10C
37   Option:
37
37  
37
37[0;36m to change your vote, [1;32mN[0;36mext question, or [1;32m[Enter][0;36m to quit voting :  [1;37m
37[0;32mDone.>*
37
37Next>
37
37  
37
37% 
37[6C
37 0%   
37[7C
37|N~|[1;32ma[0;36m...[1;32m
37Quit>
37NABCDEFGHI
37>>
37[1;32mPlease Elaborate:>
37Voting question: 
'
' Most of the text for the Message Downloading system (.QWK/etc.).
'
38ANPMS12VEUD
38[1;32mSelect Area:>
38[1;32mSwitch to which message area, or [Enter] for no change?
38NEW 
38[0;32mDone.>*
38ALL 
38[1;32mTransfer list contents:
38>[0;32m
38[1;32m :  [0;36m
38>[0;32m<empty list>>
38[1;32m
38[0;32m : 
38 [0;32m<empty list>>>[1;32mEnter changes (?) :  [37m
38>>[1;32mEnter changes (?) :  [37m
38 C 
38ALLNEWIR:ER:
38>
38[0;32mI have only [36m
38 bytes [32mavailable.
38>>
38I am sorry.  ! really would not like it if I was to let you try>to upload into such a cramped space.  Do try again tomorrow.  Thanks.>
38
38>>>[1;33m     Begin uploading now, or press <Ctrl-X> several times to abort. . .[0;32m>>>
38                              
38[0;32mFormat: [0;36m1[0;32m. .QWK, [0;36m2[0;32m. ASCII only, [0;36m3[0;32m. ANSI, or [0;36m[Enter][0;32m to go back :  [1;37m
38
38Return
38 messages maximum.  
38 bytes maximum.  Building file...>>
38MESSAGES.DAT
38.NDX
38[0K[0;32m>
38[0;32m
38 message using 
38 messages using 
38 bytes.
38>  Limit reached.
38 message not done.
38 messages not done.
38>[0;32mCreating archive, hang on...
38JDR_BBS.QWK
38MESSAGES.ZIP
38*.*
38 /es 
38>>[0;32mError creating archive.  Sorry.  Try again later or complain to !.***
38>>[0;32mFile name is 
38, and it has a size of 
38 bytes.>>[1mContinue with download
38.QWK>>[0;32m
38ASCII>>[0;32m
38ANSI>>[0;32m
38>>[0;32m
38>>>[1;33m     Start receiving now, or press <Ctrl-X> several times to abort. . .[0;32m>>>
38CONTROL.DAT
38,
380
38HELLO
38NEWS
38GOODBYE
38DOOR.ID
38*
38|~|[0;30m[2J[44m                                     [0;1;31m News [44m                                     [0m 
38  
38[37m
38[0;32m
38123
'
' Text (all, entire) for the Ramblings system.
'
39>>
39Option: About all this.Option: Read all new ramblings.Option: Toggle stats/titles.
39Option: Create a ramble.
39Requires level
39 messages, newest = 
39 message, newest = 
39[1;37m
39[1;32mSelect a ramble, option, or [Enter] to quit :
39[24C-34[1;32mTitle for this ramble :  [37m
39[1;32mEnter your introductory/opening text below.>>
39[0;32mNot Done.>*
392 
391[1;32mRamble started by 
39. . .
391
39>[1;32mWhat's the minimum SL value to access this (default = 0) :  [37m
39[0;32mDone.>*
39RAKN#
39[1;32mK[0;36mill it, 
39
39[1;32mN[0;36mew additions, 
39
39
39Jump To>>[1;36m%1 Messages.  [32mStart reading after skipping how many messages :  [37m
39[1;32mR[0;36mead it all, [1;32mA[0;36mdd to it, [1;32m#[0;36m, or [1;32m[Enter][0;36m to go back :  [1;37m
39New>>
39Read>>
39+|~|[0;33m
39Kill>
39Ramble title: 
39Add>>[1;32mEnter your comments now:>
39[0;32mNot Done.>*
39+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>[1;36m
39[1;32m>>
39[0;36m--
39>[0;31mSorry!  But you must wait until your next call to create more rambles.***
'
' Text (all, entire) for the DataBaser system.
'
40
40
40
40
40
40
40>>
40<end>
40LAMDI
40The database has a blank filename or specs line.
40[1;32mL[0;36mist, [1;32mA[0;36mdd, [1;32mM[0;36modify, [1;32mD[0;36melete, [1;32mI[0;36mnsert, or [1;32m[Enter][0;36m to exit :  [1;37m
40
40Exit
40Insert>>[1;32mInsert before which 
40Delete>>
40[1;32mDelete which 
40List>>
40Modify>>[1;32mModify which 
40Add>>
40[s[1;36mModifying an existing 
40[s[1;36mAdding a new 
40.>>
40  
40[1;32m
40[1;32m : [44m
40[0m>
40[u>>
40[
40C[44m[1;37m
40[1;31;44m
40S02
40S64
4000
4000:00:00
40MTWRFSN
40[0m>
40[0;32m
40[0;32mOnly the very last message area may be deleted.>>[0;32mThis area is:  [0m>>
40>>[1;32mShall we eliminate this area
40[0;32mNot Done.>
400
40[0;32mDone.            >
40+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>[1;36mListing of the 
40s:>>
40+|~|>>[1;36;41m[Space] to pause, [Enter] to stop.[0m>>
40+|~|
40*
'
' Text (all, entire) for the Hourly Usage Graph.
'
41[0;46m 
41
41Today1D2Y3 4A5T6ۺ7
41ASPS
41[0;46m 
41   
41[30m 
41[0;46m
41[30m [1;30;44m
41[30m[33m
41[30m[31m
41[30m[1;31m
41[30m[1;35m
41 [33m
41 [31m
41 [1;31m
41 [1;35m
41|T~|[0;30m[2J[44m                    [0;1;31m HOURLY UTILIZATION OVER THE LAST WEEK [44m                     [1;30;46m[1;30;44m
41[30;46m[0;33m[31m[1;31m[35m[1;30;44m12 1 2 3 4 5 6 7 8 9101112 1 2 3 4 5 6 7 8 91011midnightnoon[0m
'
' Text (all, entire) for the Profile: Messages Read stuff.
'
42|~|[0;30m[2J[44m                                  [0;1;31m User Info [44m                                   [0m >[1;36mMessage area statistics:>>
42.>
42none
42...
42+|~|[1;32m   
42all
42 messages[0;32m, has read through 
42 messages[0;32m, you have read through 
42 [1;32m:[33m  
'
' Text (all, entire) for the internal-method statistic screens displays.
'
43Bytes Downloaded
43Files Downloaded
43 Bytes Uploaded 
43 Files Uploaded 
43     Logons     
43 Messages Posted
43|~|[0;30m[2J[1;30;46m          Rank                   Name                  
43|~|         [0;36m
43|~|         [0;36m
43
43 [0;36m [44m
43[0;36m [44m 
43 [0;36m [44m
43[0;36m [44m 
43
43       [37m
43[36m       
43 [0;36m [44m
43[0;36m [44m 
43+|~| [44m 
43    
43   
43 [0;36m 
43+|~|
43
43
43[0m
43               
43           
43 [32;44m+|~|
43[30m[46m
43 100.00%
43,
43    [44m                                                                   [30m[46m    [44m[32m
43totals              
43[30m[46m    [44m[32mtotals+|~|
43[30m[46m    [44m                                                                   [46m
43+|~|           [44m[46m       SL       Bytes              Files          Logons          Users                     Uploaded                                  >[0m[0K[A
'
' Text (all, entire) for User History display.
'
44[0m[0K[23C-30[1mShow History of whom :  [37m[0K
44+|~|>[1;37mHistory of 
44 - 
44+|~|[1;34m
44[36m
44[0;36m
44[0m
44[1;35m
44[0;31m
44[1m
44[33m
44[1;32m
44[0;32m
44[35m
44+|~|[0;32m---End Available Information--->>
44+|~|[0;34mThis report covers the period: 
44>[39C[1;33;41m Messages [0;33m Paging[6C[35mDoors>[14C[1;36mCallr[14C[35mMins [31mPosted   UL'd[0;31mRcvd [33m [1;33;41m Files [0;35m >[1;34mLast Called   [36mNumbr [0;36mBaud[6C[0mNode [1;35m [0;31mRead [1mÿ [0;31mDL'd [1mÿ [0;31mڴ [33m  [1;32m# UL K  [0;32m# DL K [35mÿ>[1;30m>
'
' Text (all, entire) for undeleting messages.
'
45>>[32mRaise deleted messages from the dead.>
45[1;32mWork with messages from which message area :
45[0;32mActive messages range from[36m
45[32m to[36m
45.>>
45|~|>>[44m [C [1;33;41m # [44m [C [1;33;41mFrom[44m                 [C [1;33;41mTo[44m                   [C [1;33;41mSubject[44m                 [0m>>
45
45|~|[0;30;47m
45|~|[1;5;30;47m
45[0;1;31m
45[36m
45[32m
45[35m
45                  >[1;32ma[0;32m...[1;32m
45[0;32m, 
45[1;32m+[0;32m for next page, 
45+ABCDEFGHIJKLMNOPQ
45[1;32mMessage Number[0;32m, or [1;32m[Enter][0;32m to quit :  [1;37m
45or [1;32m[Enter][0;32m to quit :  [1;37m
45+
45Quit>
45[1;32mDo you wish to undelete this message
45[0;32mDone.>*
45[0;32mRebuilding Message index, hang on. . .
45[0;32mDone.            >
45[1;32mMessage number to start listing at :  [37m
'
' Text (all, entire) for Request Chat with Sysop.
'
46[0;32mSorry, ! isn't available to chat.>**
46[0;5m"
46[0;32mYes, we know.  If he's around he'll contact you.>**
46[38C-30[1;32mFor what reason do you want to chat :  [37m
46>>[1;32mThe sysop has been notified and will break in to chat if he is>[32maround and concludes that your reason is worthwhile.>***
46>>[0;32mNo.  I won't bother ! with that.  Form a proper reason.>***
46>>[0;32mNo.  I won't bother ! with that.  Look around for the information.>***
46"
46Wanted to chat about:  
46P
46[0;36mChat Attempt:  [0;33m
'
' Text (most) for the Entering Messages text entry stuff.
'
47
47[0m[2J
47[37;44m Begin your message now.  Words are wrapped automatically, a blank line 
47[40m[37;44m ends the message.  Maximum of
47 lines,
47 characters per line.        
47[40m[37;44m }#word ==> }1 Blue, }2 Green, }3 Red, }4 Violet, }5 Yellow, }6 White   
47[40m [D
47CIEDALPSGF%
47[0;35m   text> [1;32mC[0;36montinue entering, [1;32mI[0;36mnsert lines, [1;32mE[0;36mdit, [1;32mD[0;36melete lines, [1;32mG[0;36mrammar check,
47[1;32mDo you wish to fix any misspellings now
47
47+|
47|[1;30;47m
47[0K
47[40m[76C [D[0m[0K[A[3C
47|
47
47[0K[79C
47[40m [D[0m[0K[A[C
47[0m[0K
47/S /ES /POST /EXIT
47 chars, 
47 words, 
47 lines
47 line
47, 
47[0;32m(
47)
47[0;32m" is not a valid line number.>
47:
47Don't insert>
47 cpm)
47>[8C[0;36m[Enter][32m leaves unchanged.>>
47 [1;32m%[0;36m,
47|
47[0;36mInsert before which line number ([1;32m[Enter][0;36m for none) :  [1;37m
47>[0;35mmessage> [1;32mA[0;36mbort, [1;32mL[0;36mist, [1;32mP[0;36mreview, 
47[1;32mF[0;36minish later, 
47[1;32mS[0;36mave :  [1;37m
47[1;37mDelete>>
47[1;37mInsert>>
47[1;37mList>>
47[1;37mPreview
47~
47[1;37mGrammar
47[1;37mContinue>>>[A
47[1;37m%>>[32mSave this message as a MESSAGE.xxx file (%%%xxx)
47[sFinish later
470.DAT
471.DAT
472.DAT
473.DAT
474.DAT
475.DAT
476.DAT
477.DAT
478.DAT
479.DAT
47[1;37mAbort>
47[1;32mDelete from which line number ([Enter] for none) :  [37m
47Don't Delete>
47>>[1;32mUp to and including which line number ([Enter] =
47) :  [37m
47>[0;32m"[37m
47[0;32m" is not a valid line number.  Block NOT deleted.>
47>[0;32mBeginning exceeds end.  Block NOT deleted.>
47 one line.>
47 lines.>
47[0;32mUnable to insert, at message length limit.>
47|[0;32mDeleted
47>[0;32m"[37m
47[1;32mNo grammar errors found.>
47|[0m[2J
47[37;44m Words not found are reversed. 
47>[1;32mConfirm: Abort this message
'
' Text (all, entire) for Message Entering: Header input.
'
48
48
48
48
48
48
48
48
48
48Fellow Sentient Beings        
48ANONYMOUS                     
48ALL                           
48ALL
48
48
48
48
48
48
48
48
48
48
48
48[13;53f[0;31;47m[Enter] to begin text body.
48ACDFILQRSTUN
48Only sysop can FREQ from other BBS's.
48[9;74f[0;30;47m[5D[B[D[B[D[B[2A[1mDo a[4D[BFREQ[4D[B[37m[D[A[D[A[D[A
48[9;74f[1;37;47m[5D[BDo a[5D[BFREQ[5D[B[0;30;47m[D[A[D[A[D[A
48This is only for private mail.
48[9;51f[0;30;47m[10D[B[D[B[D[B[2A[1mReception[9D[BReport[6D[B[37m[D[A[D[A[D[A
48[9;51f[1;37;47m[10D[BReception[10D[BReport[7D[B[0;30;47m[D[A[D[A[D[A
48You will be notified when it is read.
48[1;32mMove to which message area ([Enter] to do nothing)?
48[9;2f[0;30;47m[8D[B[D[B[D[B[2A[1mLine[4D[Bnumbers[7D[B[37m[D[A[D[A[D[A
48[9;2f[1;37;47m[8D[BLine[5D[Bnumbers[8D[B[0;30;47m[D[A[D[A[D[A
48Either quoting or uploading, not both.
48[9;12f[0;30;47m[9D[B[D[B[D[B[2A[1mQuote[5D[Boriginal[8D[B[37m[D[A[D[A[D[A
48[9;12f[1;37;47m[9D[BQuote[6D[Boriginal[9D[B[0;30;47m[D[A[D[A[D[A
48[9;22f[0;30;47m[8D[B[D[B[D[B[2A[1mUpload[6D[Bmessage[7D[B[37m[D[A[D[A[D[A
48[9;22f[1;37;47m[8D[BUpload[7D[Bmessage[8D[B[0;30;47m[D[A[D[A[D[A
48Either FA's or CC's, not both.
48>>[0;31mNot enough drive space for a message at this time.>I'm sure ! will notice and fix it.  Please try again tomorrow.>**
48[16;2f[0;35;47mEnter path\filename.ext to import> [s[30;46m                                                                [u
48There are 
48 bytes available.
48**Not enough to allow file attaches.
48                              
48[0;33;47mWill the file(s) be free
48No CC's with Net or Echo mail.
48[0;30;46m
48                               
48[14;24f[0;34;46mBesides:[15;24f
48[0;30;46m>
48[0;34;46m+NAME to add, -NAME to remove  
48+-
48[9;32f[0;30;47m[7D[B[D[B[D[B[2A[1mCarbon[6D[BCopies[6D[B[37m[D[A[D[A[D[A
48[9;32f[1;37;47m[7D[BCarbon[7D[BCopies[7D[B[0;30;47m[D[A[D[A[D[A
48Dest: via HUB to 
48>>[9C[1;32mUpload a single text/ascii/ansi file (not compressed).>>[0;32m
48>>>[1;33m     Begin uploading now, or press <Ctrl-X> several times to abort. . .[0;32m>>>
48Sending Anonymous 
48Sending 
48Private 
48Public 
48Net Mail
48Mail
48[1;1f[0;34;47m[
48C
48[3;2f[35mIn      [0;30;46m
48[5;10f[0;30;46m
48[7;10f[0;30;46m
48You must supply an address.***
48All                           
48[5;2f[0;35;47mTo      [30;46m
48[5;2f[0;35;47mTo      [1;37;46m
48[31m  (a reply)
48MSGID: 
48REPLY: 
48[7;2f[0;35;47mSubject [30;46m
48[7;2f[0;35;47mSubject [1;37;46m
48[5;40f[0;35;47m  At [30;46m
48[5;40f[0;35;47m  At [1;37;46m
48 [
48]
48 (
48)
48[16;29f
48[17;29f
48[18;29f
48[19;29f
48 is the SysOp[20;29f
48[0;47m[2J
48[9;40f[0;30;47m[9D[B[D[B[D[B[2A[1mFile(s)[7D[BAttached[8D[B[37m[D[A[D[A[D[A
48[9;40f[1;37;47m[9D[BFile(s)[8D[BAttached[9D[B[0;30;47m[D[A[D[A[D[A
48[13;2f[1;31;47m                                        [13;2f
48[0K[14;1f
48[0K[B
48[14;1f[0m[0K[B[0K[B
48[14;1f[0;47m
48[15;2f[1;34;47mFull destination address:  
48Type '?<ret>' for help.[5;45f[0;30;46m
481234567890:/.@-
48[s                   Searching. . . [u
48No match found
48[1;32m>Select which BBS to send to :
48No match found*
48 Not found.  But I will use it.
48 Not found.  Message will be local.
48[9;69f[0;30;47m[4D[B[D[B[D[B[2A[1mNet[3D[BFAs[3D[B[37m[D[A[D[A[D[A
48[9;69f[1;37;47m[4D[BNet[4D[BFAs[4D[B[0;30;47m[D[A[D[A[D[A
48Only the sysop can net-send files.
48[15;2f[0;31;47mSorry!  But you must wait till another call to leave more messages.***
48[15;2f[0;31;47mSorry!  We're Full.  You must wait till another call to leave a message.***
'
' Text (all, complete, entire) for Internode Chat.
'
49
49
49
49
49nothing, available to chattransfering filesin a door programtyping in a messagereading a messagechatting with sysopin inter-node chat
49[0K%1 [0;36m%2 [1;32m%3  [0;32m(
49)>[1;36m
49[1;34m[0K>[0K>
49[u[0;1;36m
49[0m[2JType "q<ret>" to exit inter-node chat, "?<ret>" for help.>>>>[1;36m
49+|~|>
49+|~|[s[1;1f
49[0;33m[0KWho[23CFrom[15CIs Doing What[16CWhere>[1;34m[0K>[1;36m
49<waiting for call>
49[0m[2J[44m                               [0;1;31m Internode Chat [44m                                 [0m >Type "?<ret>" for help.>>>[1;36m
49+[0;36m
49>[0;1;36m
49[s[1;1f
49[0;1;30m[0;32m
49[1;30m
49[s[1;1f[0m!<ret>  for Who's Doing What.[0K>q<ret>  to exit inter-node chat.[0K>@<node number><ret>  to send a short private note to another node.[0K>[0K[21CThey need not be in internode chat.>Nothing is ever sent until you actually hit <ret>.[0K>[0K[1;36m[u
49[0;1;33m%1 on node %2 says:%3[1;37m
49[1;31;44m
49[0;1;30m[31mpvt[30m.
49[25;1f
49Q
49!
49?
49[1;33m[%1 has logged out of node %2.]
49[1;33m[%1 has logged on node %2.]
49[1;33m[%1 on node %2 has just entered chat.]%3
49[1;33m[%1 on node %2 has just left chat.]%3
49[0m[2J[44m                              [0;1;31m Internode Chat [44m                                 [0m>>>>>>[1;36mSending an Internode Note.  [Enter] past end to send.
49[0m[2J[44m                               [0;1;31m Internode Chat [44m                                 [0m >[1;32mSend a short note to which node :  [37m
'
' John's Address command text.
'
63   John Rohner
63   POB 340304
63   Milw. WI  53215
63
'
' Messages areas for use in main menu's NetMail option.
' 004 = message area #4 = Public NetMail
' 005 = message area #5 = Private NetMail
'
75004005
'
' end.

