
  So you want to become a POINT off this system...........

  It's really easy, fun and, inexpensive! As a POINT, you can;

   1. Send and Receive mail packets without ever logging onto the BBS.

   2. Send and Receive mail from user's Worldwide.

   3. Request FILES while reading theu the messages.

   4. Schedule your MAIL RUNS at night, when the rates are lower.

   5. Participate in most Worldwide NETWORKS.

   6. Have your own INTERNET E-MAIL Address, off this system

  There are several packages available for POINTS. Obviously, we recommend
  TERMINATE as a complete communications package that includes; Terminal
  program, Point System, FIDO/QWK Reader, Send/Receive FAX, plus a lot
  more. If you don't have TERMINATE, download 400TER.ZIP.

  Another good POINT package is PROFESSIONAL POINT. It is easy to setup
  and use however, is limited to the POINT System only. If you are looking
  for an easy to setup & use Point Software package, this is it.
  Download POINT200.ZIP for the current version or, POINT200B.ZIP for
  the current version that includes the BinkleyTerm mailer (required for
  PPOINT to operate)

  Other software available for POINTS includes; FrontDoor, InterMail,
  BinkleyTerm, D'Bridge, CPoint, etc., all of which is available from
  this system, in either the POINT SOFTWARE or FRONT END MAILER directories.


  We encourage POINTS however, we have a few rules we INSIST be followed.

   1. Only fully functional software (Commercial/Shareware/Freeware) is
      to be used. NO "HACKED" SOFTWARE will be permitted. There will be
      NO EXCEPTIONS to this rule!

   2. If using Shareware software, it MUST be registered before the end
      of the evaluation period. We support the Shareware concept.

   3. All FTSC (Fido Technical Standards) must be followed.

   4. Moderator's rules for each echo (conference) must be followed ie:
        a. No foul or offensive language permitted.
        b. Messages must remain ON TOPIC
        c. No FLAMMING of other user's

   5. You MUST setup a conference called 2250/24_POINTS in whatever
      software package you use. This echo is for communications between
      us and all user's of this system without going thru any of the
      networks we participate in. THIS IS REQUIRED!
      All new files received will also be announced in this echo.

   6. If you decide to stop as a POINT, you MUST dis-connect from all the
      echo's you were receiving, via AREAFIX.

  If you don't have a current FIDOnet Nodelist of listing of available
  echo's, you can FREQ or download the files NODELIST.ZIP and BACKBONE.NA
  which are updated weekly.

  At the present time, we do NOT have a charge for anyone Pointing off our
  system however, should our network costs increase dramatically, then all
  Points will be expected to share in the increased cost. Having said that,
  there is no indication of the network costs increasing in the near future.

  Join the growing number of people participating in the various worldwide
  networks. At the present time we participate in FIDOnet (the second
  largest, surpased only by the Internet), TOADnet, SEEKnet, PROnet and
  PHOTOnet. As soon as we can locate another HUB, we will again be a part
  of RACEnet as well.

  If you are interested in becomming a POINT off this system, download the
  file POINT.APP (Point application), complete it, following all the
  directions it contains, and upload it back to this system. Upon receipt
  of the properly completed POINT.APP, your Point Node address will then
  be assigned.

  Have fun and, enjoy.

  Dave Davidson
