

			 Word Translator for DOS
			      Version 3.52
		Copyright 1990-94 Translation Experts Limited
			   All rights reserved



				User's Manual





			       Distributed by
			  TRANSLATION EXPERTS USA
			    Post Office Box 18035
			 Denver, Colorado 80218-0035
			       (303) 329-8716
			   CompuServe #70750,1415
                         Internet: transusa@usa.net



		     Welcome to Word Translator for DOS!

Word Translator for DOS is the pop-up bilingual dictionary utility used all 
over the world.  With Word Translator, you can quickly and easily translate 
words, phrases and even complete sentences from one language to another.  
Word Translator works unobtrusively in the background alongside your favorite 
DOS word processing or editing program. You just need to type the word or 
phrase you want in the language you know best and call-up Word Translator for 
DOS. Because Word Translator provides translations faster than you can flip 
through the pages of a conventional dictionary, you'll see all available 
translations for any word or phrase you type within seconds. Just choose the 
translation you want and Word Translator will automatically replace the word 
or phrase you typed with its translation in another language.

The registered version of Word Translator for DOS allows you to customize 
your bilingual dictionary or dictionaries. At any point, you can change, 
alter or delete any word, phrase or translation or even add new words, 
phrases or complete sentences that reflect your individual business or 
personal needs. With Word Translator, you can even create your own, original 
bilingual dictionary with any two languages you want. Word Translator is a 
must for anyone who regularly works in another language.  

For foreign or English language studies, business communications or personal 
correspondence, Word Translator for DOS is the on-line, pop-up program that:

>quickly and accurately translates foreign words, phrases and even short 
 sentences right on your computer
>eliminates the need for you to flip through pages of a conventional 
 dictionary to look-up translations
>permits you to use multiple bilingual dictionaries and change from one to 
 another quickly and easily
>works unobtrusively together with your favorite DOS word processing program
>provides bilingual spell-checking as you type 
>predicts what word you are typing after only a few letters are entered
>provides grammar help in certain language modules
>translates complete documents word-by-word and phrases-by-phrase 
>allows you to customize your bilingual dictionary by changing, deleting or 
 adding your own words and translations
>lets you to create your own original, computerized bilingual dictionary 
 using any two languages saves you time writing business and personal 
 letters, reports, essays, memos, faxes and more 
>helps you improve your foreign or English language skills
>more effectively helps you study for foreign or English language quizzes 
 and tests and helps with homework too



			 Word Translator Shareware

If you have a shareware version of Word Translator for DOS or Windows
you may freely copy and circulate it to whomever you choose.  If they like 
the software and want their own registered version, they can order one by 
printing and completing the "invoice.txt" document on the shareware 
disk or the WORDTRAN directory after installation. Becoming a registered 
user provides numerous advantages including:

>language modules with a significantly greater number of entries
>a useful grammar help file for certain language modules
>the ability to change, add or delete bilingual dictionary entries
>notice of new versions of Word Translator and new language dictionaries



			    System Requirements  

To allow you to both successfully install and use Word Translator for DOS, 
your computer must be an IBM - PC/XT/AT, or be IBM compatible ("IBM clone") 
and have:

>A hard disk with 1 to 4.5 MB of free space (depending upon the size of the 
 specific dictionary to be installed)
>DOS version 2.0 or higher
>For Russian dictionary users, an EGA, VGA or Hercules Graphics Plus with 
 Ramfont monitor is required.

If you are not sure if your hard disk drive has sufficient free space 
available, type CHKDSK at the C:\> prompt and then press the <enter> key on 
your keyboard. The amount of free disk space on your machine will be 
displayed. If you are not sure what version of DOS is installed on your 
computer, type VER at the C:\> prompt and then press the <enter> key on your 
keyboard. The DOS version installed on your machine will be displayed.



		       Word Processor Compatibility  

Word Translator for DOS has been found to be compatible with the following 
word processing programs:

>Word Perfect 5.1 (If using Word Perfect 5.1 with the Russian language                                           
 module, you MUST call Word Perfect by typing: wp/cp=866 and then  
 the <enter>  key and you MUST also choose the "RUSCII" standard                                          
 in the Setup menu)
>WordStar 6.0
>Microsoft Word 4.0 (will not work with 5.0, 5.5 or 6.0)
>Professional Write 2.0 and 2.2
>Other simple editors (QEDIT, et cetera)
>Borland C and C++ compiler editors
>Symantec Q & A
>For other word processors, editors or applications, you will have to test 
 Word Translator for compatibility



		   Installing Word Translator for DOS

Remember, your MUST have DOS version 2.0 or greater and a hard disk drive 
with 1 to 4.5 MB of free space (depending upon the specific language module 
and version you are installing) to successfully install and operate Word 
Translator for DOS on your machine.

Installation Procedure:

1. Insert the Word Translator program disk into your A (or B) drive.
2. At the C:\> prompt, change to your disk drive prompt (the drive you just 
   inserted the disk into) by typing A:\ (or B:\) [depending upon which drive 
   you placed the disk into] and pressing the <enter>) key on your keyboard. 
   The C:\> prompt should change to A:\> (or B:\>), the drive containing the 
   disk.
3. After the A:\> (or B:\>) prompt appears, type: install and then press the 
   <enter> key on your keyboard.
4. Carefully follow the on-screen installation instructions.



		      During the Installation Process 

You will be requested to "Please enter the destination drive?" (the "default" 
is the "C" drive). For most users, using the "C" drive will not cause any 
conflict. But if you need to install Word Translator on a drive other than 
"C," type the letter of the drive your require ( e.g. "D, "E, "F," et cetera) 
and then press the <enter> key on your keyboard. If you do not type a 
destination drive letter and only press the <enter> key, the installation 
program will use "C" drive as the "default."

You will be asked, "Are there any more Word Translator disks? (F10=Yes)." If 
you have more than one disk, answer "Yes" by pressing the F10 function key on 
your keyboard until you have inserted (and, thereby, installed) all the disks. 
If you only have a single disk, you can press any key except the F10 function 
key as a"No" answer to this question.

You will also be asked, "Do you want to install Word Translator in your 
'autoexec.bat' file? (F10=Yes)." If you want Word Translator to automatically 
run (become memory-resident) every time you boot-up your machine, you should 
answer Yes to this question by pressing the F10 function key. If you don't 
want Word Translator run every time you boot-up your computer, you should 
answer No by pressing any key except the F10 function key. For more 
information about what the "autoexec.bat" file is and how it functions, 
please refer to your DOS User's Manual.

During installation, you will also be asked "Do you want to define your own 
'hot keys?' (F10=Yes)." Those users who find that the "default" hot keys used 
by Word Translator interfere with some of the commands of their word 
processing program (or other program) may want to define their own hot keys.  
You may also change the "default" hot keys after installation by using Word 
Translator's "setup.exe" program.

If, at any point during installation, you're in doubt about how to proceed 
with the installation, push the F-1 function key on your keyboard to open 
Word Translator's Help menu.  The installation program for Word Translator 
for DOS creates a directory on your hard disk drive normally called WORDTRAN.



	       Word Translator's Basic "Default" Hot Keys

	(Control) Ctrl + LEFT SHIFT = Activates/opens Word Translator
		  Alt + RIGHT SHIFT = Opens Word Translator's Setup




	    Changing the "Default" Hot Keys After Installation

If, after you have installed the program, you want to redefine Word 
Translator's "default" hot keys, you may do so. First change your current 
directory to the directory containing Word Translator. For example, if the 
Word Translator files are on the C drive in a directory called WORDTRAN, 
you would change the directory by typing CD WORDTRAN at the C:\> prompt and 
then pressing the <enter> key on your keyboard. The prompt (and, thereby, 
the directory) should change to C:\>WORDTRAN 

At the C:\>WORDTRAN prompt, type SETUP and press the <enter> key. From the 
setup screen, press the F10 key on your keyboard as a Yes answer to the 
question: "Do you want to define your own 'hot keys?' (F10=yes)."  For each 
hot key combination, you have the either choice to keep the "default" or 
change it.  

Each hot key combination can consist of a maximum of three (3) keys. The 
first key can be ALT, CONTROL, LEFT SHIFT, or RIGHT SHIFT. The second key 
may be ALT, CONTROL, LEFT SHIFT, RIGHT SHIFT or a Function Key (F1 through 
F12). The third key can (1) be "blank" (omitted) or (2) be another Function 
Key (F1 through F12) or (3) a Letter key. This allows you the widest range 
of hot key possibilities to help prevent any potential hot key conflicts 
between Word Translator and your other programs or applications. 



			Word Translator's Function Keys

ESC Key..........Exits Word Translator without performing any further actions
F1 Key...........Opens Word Translator's Help File
F2 Key...........Opens Word Translator's Grammar Help
F3 Key...........Adds new translation(s) to your dictionary
F4 Key...........Deletes translations.
F5 Key...........Deletes a word from your screen in document translation mode
PgUp/PgDn Keys...Moves up or down in the current pop-up window
<enter> Key......Chooses the current highlighted translation or highlighted 
		 field in the help or grammar menus



		  How to Load/Call-Up Word Translator

If you included Word Translator in your autoexec.bat it will become memory-
resident (loaded into memory) every time you boot-up you computer. To open 
Word Translator, you only need to press the hot key combination (the 
"default" hot key combination (Control) Ctrl + LEFT SHIFT to call-up the 
program.  

If Word Translator is NOT included in you "autoexec.bat," you will need to 
load it each time you want to use it. To do so, first make sure you have 
changed to the directory containing your Word Translator program and files.  
For example, if the Word Translator program and files are on the C drive 
in a directory called WORDTRAN, you would change the directory by typing: 
CD WORDTRAN at the C:\> prompt and then pressing the <enter> key on your 
keyboard. The C:\> prompt (and, thereby, the directory) should change to 
C:\WORDTRAN. At the C:\>WORDTRAN> prompt, type WORDTRAN and press the 
<enter> key. Word Translator is now loaded into your computer's memory. 
Once loaded into memory, you can call-up Word Translator by pressing the 
hot key combination you have selected or the "default" hot key combination 
(Control) Ctrl + LEFT SHIFT.




		   Translating a Word From the Screen

First, make sure Word Translator is loaded (memory-resident). Refer to the 
instructions under the heading: "How to Load/Call-up Word Translator" if 
you're not sure how to do that. After Word Translator is loaded (memory-
resident), load your word processor. Now you can either type something on the 
screen or load an existing file into your word processor. Position the cursor 
on top of the word (or one space to the right of the word) you want to 
translate. Simultaneously press the (Control) Ctrl + LEFT SHIFT hot key 
combination. The word that was under the cursor (or one space to the left of 
the cursor) should appear in the upper box of Word Translator under the 
heading "Word/Phrase to Translate."

A second Word Translator box will appear displaying the heading "CHOOSE 
Word/Phrase." If the word under the cursor exists in the dictionary, you can 
press the <enter> key to translate the word. If the word under the cursor 
does not exist in the dictionary, you can choose to either add it to the 
dictionary (by pressing the F3 key), or your can choose another word from the 
dictionary. In order to choose another word from the dictionary, use the 
PgUp or PgDn keys to "scroll" up or down through words and then the up and 
down arrow (toggle) keys to highlight different words. 

To translate a word, either press a number key (from "1" to "5") or use the 
up and down arrow (toggle) keys to highlight the word to translate then press 
the <enter> key. 

To exit without choosing any of the words displayed, press the ESC key. 

The pop-up window will change and display the heading "CHOOSE Translation" in 
the second box from the top of the pop-up window. Choose a translation in the 
same way you chose a word in the "CHOOSE Word/Phrase" box. Simply use the up 
or down arrow (toggle) keys to highlight different translations and then 
press the <enter> key when the translation you prefer is highlighted. The 
same choice can be made by pressing a number key between "1" and "5."  

If all the available translations for a word fail to appear on the screen at 
the same time, use the PgDn and/or PgUp keys to scroll through all available 
translations for the word you want a translation for. Press the ESC key if 
you do not want to choose any translation.

IMPORTANT: If at any point you wish to exit Word Translator without 
performing any further actions, simply press the ESC key. If, after pressing 
the ESC key, you return to the previous Word Translator window, press the ESC 
key again. You should exit from Word Translator without performing any 
further actions.



		       Typing Your Own Word or Phrase

First follow the instructions under the heading "How to Load/Call-Up Word
Translator." After making Word Translator memory-resident, load your word 
processor. Now you can either type something on the screen or you can load 
an existing file into your word processor.  Position the cursor on part of 
the screen where there are no words under the cursor nor any words just to 
the left of the cursor. Press the Control (Ctrl) + LEFT SHIFT ("default") 
keys simultaneously. 

The Word Translator window will pop-up on the screen with the heading 
"Word/Phrase to Translate" in the top box. The cursor will be in this box.  
Now type a word or phrase you would like to translate. A maximum of 
thirty-four characters is allowed. You may use the backspace key to delete 
any characters in the word or phrase that you are typing. When you are done 
press the <enter> key.

A second box will appear and display "CHOOSE Word/Phrase." If the word under 
the cursor exists in the dictionary, you can press the <enter> key to 
translate the word.  If the word under the cursor does not exist in the 
dictionary, you can either add it by pressing the F3 function key, or your 
can choose another word from the dictionary. In order to choose another word 
to be translated, you should use the PgUp or PgDn keys to scroll up or down 
through words. 

You can use the up arrow and down arrow (toggle) keys to highlight different 
words. To translate a word, either press a number key from "1" to "5" or use 
the up and down arrow (toggle) keys to highlight the word to translate, 
then press the <enter> key. Press the ESC key to exit Word Translator without 
choosing any of the words.  

The pop-up window will should change and display the heading "CHOOSE 
Translation" in the second box from the top of the pop-up window. Choose a 
translation in the same way that you chose a word in the "CHOOSE Word/Phrase" 
box. Simply use the up or down arrow (toggle) keys to highlight different 
translations and then press the <enter> key when the translation that you 
prefer is highlighted. The same choice can be made by pressing a number key 
between "1" and "5." 

If all available translations fail to appear on the screen at the same time, 
use the PgDn and/or PgUp keys to scroll through all the translations for the 
word. Press the ESC key if you do not want to choose any translations.

IMPORTANT: If at any point you wish to exit from Word Translation without 
performing any further actions, simply press the ESC key. If, after pressing 
the ESC key, you return to the previous Word Translator window, press the ESC 
key again. You should exit from Word Translator without performing any 
further actions.



		    Adding Translations to The Dictionary

If the word or phrase you have entered (or one that Word Translator has 
"copied" from the screen) is not found in the bilingual dictionary, you can 
easily add this word or phrase to the dictionary together with translations 
for it by pressing the F3 function key.

The F3 function key is also used to add single (individual) translations to 
an existing set of translations when the second box from the top bears the 
heading "CHOOSE Translations."



			   Deleting Translations

When the second box from the top displays the heading "CHOOSE Translations," 
you can use the F4 function key to delete single translations (one at a time) 
from the existing list of translations. This is accomplished by first 
highlighting the translation to be deleted by using the up and down arrow 
(toggle) keys and then pressing the F4 function key. You will be asked if you 
are sure that you want to delete the highlighted translation. Be sure to 
answer this question carefully because nothing can retrieve a deleted 
translation. However, any translation you inadvertently delete can later be
re-entered but only individually.



		       Word Translator's Setup Menu

The setup menu can be opened by simultaneously pressing the Alt + RIGHT SHIFT 
hot key combination (Alt + RIGHT SHIFT is the "default" hot key combination).  
When this hot key combination is pressed, you will see the following key 
options displayed:
		      0--Word Translation = ON
		      1--Spell Checking = OFF
		      2--Spell Checking Beep = OFF
		      3--Document Translation = OFF
		      4--Prediction = OFF
		      6--Speed of Return Buffer = MEDIUM
		      7--Current Language = The Selected Bilingual 
			 Dictionary Module being used by Word Translator 
			 (e.g. English-Spanish-English)

You cannot have Word Translation "ON" at the same time Spell-Checking, 
Document Translation or Prediction is "ON." You can have only one of these 
options "ON" at any one time.  

If you press "1," both the Spell-Checking and the Spell-Checking Beep will be 
"ON." Then, if you press the ESC key to exit the setup menu, Spell-Checking 
will be activated. When the Spell-Checking Beep option is "ON," Word 
Translator will "beep" every time a word is misspelled or cannot be found 
it in the bilingual dictionary.  You may turn the "beep" off once Spell-
Checking is selected by pressing the number "2" key.  

The fourth option is Document Translation. Before activating this option, you 
should first load the document that you wish to translate into your word 
processor and, then, position the cursor on top of the first word in the 
document.  Press the Alt + RIGHT SHIFT keys simultaneously (Alt + RIGHT SHIFT 
is the "default" hotkey combination) to call the setup menu. Press the number 
"3" key to turn Document Translation "ON."

If you press the number "4" key to turn Prediction "ON," another choice 
labeled "number 5" will appear and display the notice "5-Activate Prediction 
after XX characters." After this choice appears, press the number "5" key a 
few times and notice how the "XX" changes incrementally and, after reaching a 
count of 15, starts again from 1. This number denotes how many typed 
characters must be typed before the prediction function is activated. For 
more details about how the Prediction mode works, please read the Prediction 
section of this Manual.

You can change the speed by which Word Translator "returns" words or phrases 
to your word processor by pressing the number "6" key.

By pressing the number "7" key repeatedly, you can access different language 
modules if more than a single language module is installed on your computer.

For the Russian language you have the option of choosing between the 
CYRILSCII or RUSCII character standards by pressing the number "8" key. When 
using the Russian language module, you can also change the keyboard layout by 
pressing the number "9" key.  You can also disable the Russian keyboard 
driver by pressing the F10 function key.  We recommend that you use the 
CYRILSCII standard unless, for some reason, you prefer the RUSCII standard. 



			       Spell-Checking

Word Translator can spell-check in two different languages as you type. Every 
time you press the space bar, Word Translator will determine if a spell-check 
is required. If it is, Word Translator will spell-check the word occurring 
just before the last space entered. If a word is misstyped or not in the 
bilingual dictionary, Word Translator's spell-check will "beep" and display a 
window with a suggested spelling. You may scroll up and down the window using 
the PgUp/PgDn (toggle) keys and to choose a word to replace the one just 
typed in your word processor. Move the highlight bar to the correct spelling 
and press the <enter> key or just press the number of the correct translation.  
Either action will replace the incorrectly spelled word with one that is 
correctly spelled.  

If you are an extremely fast typist, some letters will only appear on the 
screen after a slight delay (because it takes time to spell-check each word), 
however, no entry will be lost if the spelling is correct. 

To activate spell-checking, follow the steps shown above under the heading 
"Word Translator's Setup Menu." You may deactivate the spell check "beep" 
whenever you wish by changing the setup menu (called-up by simultaneously 
pressing the Alt + RIGHT SHIFT "default" hot key combination). 

Whenever you wish, you may also deactivate the spell-checking feature in 
the Setup menu.



			    Document Translation

The Document Translation feature allows the user to translate a complete 
document from one language to another inside your word processor. The 
Document Translation feature will perform a word-by-word and phrase-by-phrase 
translation with phrases totaling five or less words. This will not 
accomplish a "perfect" sentence translation because the proper grammatical 
order of words might differ from one language to the other. However, it will 
provide a good "first approximation" and can serve as an aid in final 
translation. You might find that you are able to use this feature to 
translate most sentence segments, leaving only some segments that you will 
have to edit. Despite its limitations, the Document Translation feature can 
greatly assist you in translating documents from one language to another.

The Document Translation feature is activated in the Setup Menu. Once 
it is activated, Word Translator will start translating the document 
beginning with the word under the cursor. The Word Translator translation 
window will appear.  At this point, you can either choose to translate the 
word by selecting a translation, or you can choose not to translate the word 
by pressing the ESC key.  

You can also stop the document translation process at any point by pressing 
the F4 function key.



				 Prediction

Word Translator's prediction feature is the latest addition to the program.  
While you are typing in your word processor, Word Translator will display 
suggestions (predictions) of what you want to type after a certain number of 
letters/keystrokes have been entered. The number of letters/keystrokes Word 
Translator counts before going into "prediction mode" can be changed in the 
setup menu.  The prediction feature also simultaneously accomplishes a form 
of spell-checking as it provides prediction. By using the prediction feature, 
skilled translators can significantly reduce translation time because the 
computer does most of the "typing."

To activate the Prediction feature, press the Setup hot key combination 
(Alt + RIGHT SHIFT is the "default"), then press the number "4" key to turn 
the Prediction feature "ON."  

You can press the number "5" key to change the number of letters/keystrokes 
required to activate the Prediction feature. After setting this selection, 
you can press the ESC key to exit the setup menu. Then, start typing in your 
word processor. After the allocated number of letters/keystrokes have been 
entered (displayed on one side of your screen), you will seen a pop-up window 
with the number key choices "0" through "9" and function key choices F1 
through F12. One of the choices will be highlighted.  

You can change the highlighted choice by using the up and down arrow (toggle) 
keys. To select a highlighted choice, either press the <enter> key or its hot 
key combination--the number keys "0" through "9" or the function keys 
numbered F1 through F12.  

You can obtain the translation for each line displayed on the screen by 
pressing the SHIFT + (Choice) hot key combination (Choice = the number "0" 
through "9" keys or F1 through F12). If any key combination other than the 
"Choice" hot key (SHIFT + Choice or the <enter> key) is selected, Word 
Translator will exit from the pop-up window and accomplish nothing.

It might require a little practice to obtain full benefit from the 
Prediction feature but try it out. You'll find that the time invested will, 
ultimately, be well worth the time. 



			  Uninstall Word Translator

In some cases, you may want eliminate Word Translator from your computer's 
memory in order to free memory for some other purpose. Word Translator allows 
you to easily do this. To uninstall Word Translator, first Exit your word 
processor so that you are in DOS. Press the (Control) Ctrl + Alt + E keys 
simultaneously.  The message "Word Translator has been removed from memory" 
will appear on the screen. Then, press the <enter> key. This action will 
effectively free the memory of your computer that was previously used by 
Word Translator. You can also uninstall Word Translator by using the "/u" 
command line parameter: WORDTRAN /u + <enter>. 

This option is provided to enable you to uninstall Word Translator from a 
batch file.



			      Change an Accent

To change an accent:
									       
1.  You must NOT be using the Russian language module.
2.  Place the cursor after the character that you want to accent.
3.  Press the accent hot key combination (Alt + C is the "default") 
    repeatedly until the current accent is displayed on the screen.



			 Typing Russian Characters

To type Russian characters, you must use Word Translator with the Russian 
language module. To change from one language module to another, please refer 
to the Setup section in this Manual. 

The following applies ONLY If you do NOT use Word Perfect with the Russian 
language module: if, while typing, you see only Roman characters, you can 
change to Russian characters by pressing the Russian language hot key 
combination once (Alt + C is the "default"). Doing so will enable you to 
type Russian characters. To return to typing English characters, again, 
simultaneously press the Russian language hot key combination (the "default," 
again, is Alt + C). 


			Printing Russian Characters

If you do NOT use Word Perfect with the Russian language module, you will 
need additional software to be able to print Russian characters. This 
software is called "NewKey" and can be obtained from:

			      Frank Bell
			      FAB SOFTWARE
			      Post Office Box 336
			      Wayland, MA  01778
			      (508) 358-6357



			     Accented Characters
       
Accented characters are critical for some languages. You can easily enter 
accented characters in your word processor by using the Alt, Shift, Ctrl and 
number keys on your numeric keypad to enter the ASCII codes of th various 


	 Quickly Adding Lists of New Words or Phrases and Translations

A special utility program for quickly adding lists of new words or phrases 
and their translation(s) to your dictionary is available to registered users  
To use this special utility program, the new words or phrases and their 
translations must first be entered in ASCII text/file format in specific 
order and manner/format. The utility will read your ASCII file and add all 
the words and phrases to the bilingual dictionary you specify. Please contact 
Translation Experts or an authorized distributor if you would like to order 
a copy of this utility program.



			Word Translator for Windows 

With Word Translator for Windows, Windows users can now have Word Translator 
working for them. Word Translator for Windows' speed and file access is very 
similar to that of the DOS version but has the characteristic Windows look 
and feel. It works with most Windows word processing programs, editors, and 
other Windows applications. Please see the attached order form for ordering 
and pricing information.


		      Word Translator for Macintosh  

Mac Language Translator, a fully operational Macintosh version of Word 
Translator, will soon be available. Please contact an authorized distributor 
about the Macintosh version of Word Translator. 


		   Currently Available Language Modules

		English-Portuguese-English---25,000 entries

		English-Russian-English I----40,000 entries
		English-Russian-English II---72,000 entries
		English-Russian-English III-103,000 entries

		English-Danish-English I-----40,000 entries
		English-Danish-English II----72,000 entries

		English-German-English I-----30,000 entries
		English-German-English II----80,000 entries
		English-German-English III--126,000 entries

		English-Spanish-English------25,000 entries

		English-Croatian-English-----28,000 entries

Additionally, for a relatively small charge, Translation Experts can provide 
you with a bilingual dictionary module with any two of the languages listed 
above. So if, for example, you need a German-Portuguese-German dictionary 
module, Translation Experts can produce it for you. For further information 
about special bilingual dictionaries, please contact either Translation 
Experts or an authorized distributor. Periodically, all registered users of 
Word Translator will be notified of new language modules as well as program 
upgrades and new language software products.


			New Features We're Working On

>More languages 
>More words in each language
>Specialized dictionaries for business, science, the arts, et cetera
>A Thesaurus for each language
>Grammar help for every language and better grammar help for those languages 
 that already have it
>Conjugation help
>Complete document translation capability
>Speech capability so that each word or phrase can be heard


		  Experiencing Problems?  Have New Ideas?
	
Our software is designed to work the way you do; to fit your needs not ours.  
The financial support you provide by becoming a registered user of Word 
Translator allows us to continue to improve and expand the capabilities of 
our software to better serve your needs. Without the financial support 
provided by registered users this wouldn't be possible. 

If you experience a problem with the operation of our software, please report 
it to us immediately. We'll do all we can to see that the problem is 
resolved to your satisfaction as soon as possible. And we love to hear your 
comments about our software as well as ideas you may have for future versions.  
What new features would help you?  Which new language modules would you like 
to see?  How can we make our software even easier to use?

Users who have significantly modified a language module by adding new words, 
phrases and translations or have created entirely new bilingual dictionaries
are entitled to receive significant discounts on new releases of our software 
as well as other available language modules. If you are such a user, please 
contact us or send us a disk copy of the dictionary files that you have 
enhanced.  Please understand that we cannot accept any dictionaries that have 
been simply copied from other sources. The dictionaries must be both original 
and the intellectual property of the user that created them.


			    The Software Authors

Nenad Koncar         Principal software engineer and designer of Word 
		     Translator. M.S., Computer Science. Currently doing 
		     Ph.D. research. 

Koert Zeilstra       Software engineer and co-designer of Word Translator for 
		     DOS and Word Translator for UNIX.  M.S degree., Computer 
		     Science.  Currently working as a software engineer in                                                              
		     Virginia.

Halldor Gislason     Author of the Macintosh version of Word Translator. The 
		     team's most experienced software engineer with several 
		     years experience working for a major software company.

Robert Devcic        Microsoft Windows expert and responsible for Word 
		     Translator for Windows. B.S., Computer Science, Zagreb, 
		     Croatia. Currently a computer consultant and software                                                                        
		     developer.

Jens Rex             Our main "idea engine."  He gives us our best ideas 
		     about what our software should do and how it should do 
		     it. He is the largest distributor of shareware in 
		     Denmark and a distibutor of Word Translator software.


		  Dictionary Authors/Copyright Holders            

		  Spanish..............Patricio Burbano
		  Portuguese...........Americo de Almeida
		  Croatian.............Zeljka Martinis
		  Norwegian............Arkeo A. S. - Word Office
		  Danish...............Jens Rex
		  Russian..............Victor A. Makuha
		  German...............Alan Bridgewatrer
		  Danish-German........Jens Rex



			  Authorized Distributors


			 North America & CompuServe

			  Translation Experts USA
			  P.O. Box 18035
			  Denver, Colorado 80218-0035 
			  (303) 329-8716
			  CompuServe: #70750,1415

United Kingdom
Testware U.K. Ltd.
46 The Avenue
Harrogate, N. Yorks.
United Kingdom, HG1 4QD
tel: (+44) (0)423 886415 (24hrs)
tel: (+44) (0)423 880471 United Kingdom

SMS Shareware
19 Carshalton Road
Camberley, Surrey GU15 4AQ
United Kingdom
tel: (+44) (0)276 681-864
fax: (+44) (0) 276 643-82

Austria, Germany & Switzerland
Patrick Awart
Marchfeldstr. 16-18/4/7/28
A-1200 Wien, Austria
tel: (+43) 1-33-00-659
tel: (+43) 1-55-88-755

Denmark, Netherlands
PRO-SOFT
Benloese Skel 4G
DK-4100 Ringsted, Denmark
tel: (+45) 53-619-042
fax: (+45) 53-619-391

Norway, Sweden & Finland
Arkeo A.S. - Word Office
Hellestvedveien 42
3965 Herre, Norway
tel: (+47) 3-966-700
fax: (+47) 3-966-656



				 Tutorial

Sample Session 1--Translate a Word from Your Word Processor Screen
Sample Session 2--Translate a Word by Typing it into Word Translator
Sample Session 3--Translating a Phrase from Your Word Processor
Sample Session 4--Add a New Translation to an Existing "Base Word"
Sample Session 5--Delete a Translation for an Existing "Base Word"
Sample Session 6--Add a New "Base Word" with a Set of Translations
Sample Session 7--Using the Help Menu
Sample Session 8--Using Grammar Help
Sample Session 9--Bilingual Spell-Checking
Sample Session 10-Translating a Document
Sample Session 11-Using the Prediction Feature

This eleven session tutorial will take you step-by-step through all of 
Word Translator's basic functions.  The same commands, instructions, steps 
and techniques detailed in the tutorial are valid for all language modules.  
Each session will guide you through the steps you'll need to know to 
successfully use Word Translator for DOS. Before any session make sure you 
have taken these two steps:

1. Followed the instructions on how to make Word Translator memory-resident
2. Opened your word processing program


Sample Session 1:  Translate a Word From Your Word Processor Screen

1. Type a word in English in your word processor. For example, the English 
   word "car." Simultaneously press the (Control) Ctrl + LEFT SHIFT 
   ("default") hot key combination.
2. The Word Translator Screen will appear.
3. Press the <enter> key on your keyboard.
4. Another Word Translator screen will appear.
5. Press the up and/or down arrow (toggle) keys to highlight a selected 
   translation.
6. Press the <enter> key.
7. The translation for the English word "car" will replace the word "car" 
   in your word processor.   

Sample Session 2:  Translate a Word by Typing it into Word Translator

1. Position the cursor at a point in your word processor screen where there 
   are no words under or just to the left of the cursor.
2. Simultaneously press the (Control) Ctrl + LEFT SHIFT ("default") hot key 
   combination keys.
3. The Word Translator Screen will appear with an empty line under the 
   heading "Word/Phrase to Translate."
4. Type the word such as the English word "beautiful" (or some other word) 
   and then press the <enter> key.
5. Another Word Translator screen will appear.
6. Press the number "1" key.
7. The translation for the word you typed (e.g. "beautiful") will be put into 
   your word processor at the point your cursor was positioned before 
   calling-up Word Translator.


Sample Session 3:  Translate a Phrase from Your Word Processor

1.  Type a two to four word phrase on your word processor's screen.
2.  Move the cursor so it is on the first letter of the first word of the 
    phrase you just typed on the screen.
3.  Simultaneously press the (Control) Ctrl + M ("default" hot key 
    combination).
4.  Press the right arrow (toggle) key a number of times to "ighlight the 
    entire phrase.
5.  Press the <enter> key.
6.  Press the down arrow (toggle) key.
7.  Press the <enter> key.
8.  A Word Translator screen will appear.
9.  Move the cursor by using the up and down arrow (toggle) keys to highlight 
    the word or phrase you want to translate.
10. Press the <enter> key.
11.  The translation for the phrase you originally typed will appear on you 
     word processor the screen--if a translation for the phrase is in your 
     bilingual dictionary. 


Sample Session 4:  Add a New Translation to an Existing "Base Word"

1.  Type the English word "car" in your word processor. Simultaneously press 
    the (Control) Ctrl + LEFT SHIFT ("default") hot key combination.
2.  Press the <enter> key to choose the word "car."
3.  Press the F3 function key to add a new translation.
4.  Press the F10 function key to answer Yes to the question: "Are you sure?"
5.  Press the number "1" key (to add one new translation) and then press the 
    <enter> key to answer the question "Number of Translations:"
6.  For fun, type any word (as a translation) and press the <enter> key.
7.  Press any key.
8.  Simultaneously press the (Control) Ctrl + LEFT SHIFT "default" hot key 
    combination again.
9.  Press the <enter> key.
10. The new translation you typed for fun will appear on the screen.



Sample Session 5:  Delete a Translation for an Existing "Base Word"

1.  Type the English word "car" in your word processor. Simultaneously press 
    (Control) Ctrl + LEFT SHIFT ("default") hot key combination.
2.  Press the <enter> key to choose the word "car."
3.  Position the "highlight" bar on the translation you want to delete. This 
    could be the translation you added "just for fun" in Sample Session 3.)
4.  Press the F4 function key to delete the "highlighted" translation.
5.  Press the F10 function key to answer Yes to the question "Are you sure?"
6.  Press any key.
7.  Simultaneously press the Control (Ctrl) + LEFT SHIFT ("default') hot key 
    combination again.
8.  Press the <enter> key.
9.  The translation you just deleted will no longer appear on the screen.



Sample Session 6:  Add a New "Base Word" with a Set of Translations

1.  Type a word in your word processor that you KNOW is NOT in the bilingual 
    dictionary.
2.  Simultaneously press (Control) Ctrl + LEFT SHIFT ("default") hot key 
    combination.
3.  Press the F3 function key to add a new base word and its translations.
4.  Press the F10 function key to acknowledge the action--answer Yes.
5.  Press the number "3" key (to add three translations) to answer the 
    question "How many translations:" and then press the <enter> key.
6.  Type three words (translations) of your choice for the translation of the 
    word typed in the first step. Press the <enter> key after each word has 
    been typed.
7.  Press any key.
8.  Simultaneously press the (Control) Ctrl + LEFT SHIFT ("default") hot key 
    combination again.
9.  Press the <enter> key.
10. The translations you just entered for the word will appear under or just 
    to the right of the cursor in your word processor.



Sample Session 7:  Using the Help Menu

1. Press the F1 function key while you are in any Word Translator screen.
2. Press the up arrow or down arrow (toggle) keys to select and highlight a 
   menu item word from the help menu. If you press the <enter> key when a 
   help menu item word is highlighted, the help menu item word will be 
   explained in greater detail.
3. Press the PgDn or PgUp keys to view more help topics.
4. Press the ESC (Escape) key to exit the help menu.



Sample Session 8:  Using Grammar Help

1. Press the F2 function key while you are in any Word Translator screen.
2. Press the PgDn or PgUp to view other pages.
3. Press the ESC (Escape) key to exit the grammar help menu.



Sample Session 9:  Bilingual Spell-Checking

1. Simultaneously press the Alt + RIGHT SHIFT ("default") hot key 
   combination to call-up the setup menu.
2. Press the number "1" key to activate Spell-Checking.
3. Check that the proper language module has been chosen (selected).
4. Press the ESC key.
5. Start typing in your word processor.
6. If a word has been misspelled or it is not in the current bilingual 
   dictionary, the computer will "beep" and will offer you a list of 
   suggested spellings.
7. If the word is not misspelled but simply does not exist in the current 
   bilingual dictionary, press the F3 function key to add it (together with 
   one or more translations) to the current dictionary.



Sample Session 10:  Translating a Document

Before you start translating a document you should make a copy of the 
document you want to translate and give the copy the name of the translated 
version of the document the translation copy. It is also recommended that you 
frequently backup your translation copy during the translation process. It 
can be useful to have a hard copy (printout) of the original source text in 
front of you as you are translating.

1. Load the translation copy of the document you want to translate into your 
   word processor.
2. Move the cursor in your word processor so it is on top of the first word 
   in the document you want to start translating.
3. Simultaneously press the Alt + RIGHT SHIFT ("default") hot key 
   combination to view the Setup menu.
4. Press the number "3" key to activate Document translation.
5. Check to see that the proper language module has been chosen (selected)
6. Press the ESC key.
7. Word Translator will first look to see if it can find any phrases (of up 
   to 5 words total length). If it cannot find any such phrases, it will 
   attempt to find the word under the cursor in the current bilingual 
   dictionary. You may add new words and phrases during the Document 
   translation process.
8. If you do not want to translate a word then you can either skip past it by 
   pressing the ESC key or erase (remove) it by pressing the F5 function key.
9. There may be occasions during the document translation process when you 
   want to stop the document process to accomplish some editing of the 
   translated sentence. This can be done by pressing the F4 function key.  
   After doing this you will probably want to continue with the document 
   translation process. This can be done by again following steps 2 through 6 
   in this sample session.


Sample Session 11:  Using the Prediction Feature

1.  Simultaneously press the Alt + RIGHT SHIFT ("default") hot key 
    combination to view the Setup menu.
2.  Press the number "4" key to activate Word Translator's Prediction feature.
3.  Adjust the number of letters/keystrokes after which the prediction will 
    be activated by pressing the number "5" key repeatedly until the desired 
    number appears.
4.  Check that the proper language module has been chosen (selected).
5.  Press the ESC key.
6.  Start typing in your word processor.
7.  After the allocated number of letters/keystrokes have been typed, the 
    Word Translator screen will appear with a window of 22 predictions.
8.  Choose the word or phrase that you want use from the list of predictions 
    by highlighting it with the up or down arrow (toggle) keys and then 
    pressing the <enter> key when the selected word is highlighted.
9.  You can obtain more predictions than the 22 provided by using the up and 
    down arrow (toggle) keys to go in the up or down direction beyond the 
    choices that are given on the screen.
10. You can also press the Shift + Choice ("default") hot key combination 
    (Choice=the number "0" through "9" keys or the F1 through F12 function 
    keys or <enter>) to view a list of translations for the word or phrase.  
    You may then choose one of the translations by moving the up or down 
    arrow (toggle) keys to highlight the desired translation and then 
    pressing the <enter> key, or you may exit without doing anything by 
    pressing the ESC key.
11. You may decide to disregard any given prediction by pressing any key 
    except the Shift + Choice ("default") hot key combination (Choice=the 
    number "0" through "9" keys or the F1 through F12 function keys or the 
    <enter> key).
