What's New                                                     Fenimore's Macro Suite

Modified:      ALT A. B, D, E, F, L, M, N, P, T, V, X,; CTRL D, G, L, Z;
               ADDR2ENV, ALTKEY, ASCII, BARCODE, CTRLKEY,
               CTRL INS/ENH INS, DP, ENH, FN, OPT, TABLE, TOC;
         NEW:  ALT Tab, CTRL Home, SPRDSHET

The following are the most recent changes:

ALT A
8 Nov2       Modified to turn off reveal codes during execution and back
             on at the end of the macro. Made some minor menu changes.
             (Version 3.73)

ALT B
13 Sep2      Added access to menu #4 for manual index entries. (Version
             4.10)

2 Oct2       The menu #4 option mnemonic was changed from the letter "I"
             to the letter "X" for consistency with menu #2's access
             option for the same menu. (Version 4.10a)

5 Nov2       Added numerical/symbol access to all options. Numbers which
             used to access the other menus were converted to Function
             key options. (Version 4.2)

ALTD
6 Nov2       When a requested directory doesn't exist, an error message
             is now displayed rather then the macro quitting without
             informing of a problem. (Version 3.90a)

12 Dec2      Hitting SETUP (Shift F1) now runs LISTSET (formerly ALTL) to
             switch between long and short document names. (Version 3.91)

ALT E
20 Sep2      Partially rewrote to increase (slightly) speed and for
             easier support. Numerical menu items are no longer
             highlighted, alpha menu items are uppercase; non-menu items
             are lowercased. (Version 1.20)

2 Nov2       Changed the menu a little for clarity (1.20a)

ALT F
21 Sep2      Hitting Shift F7 (Print) displays a prompt requesting the
             number of the document to print. If the number is out of
             range an error message is displayed and AutoRetrieve is
             reentered. If the document exists, it is printed and the
             normal document edit screen is reentered (this is because if
             a macro is running the print operation can't properly
             proceed - macros consume resources the print option needs to
             operate). Hitting ENTER or EXIT (F7) reenters the
             AutoRetrieve menu. This macro option allows only a single
             print operation per execution. Incompatible file formats
             won't be allowed print (WordPerfect cancels the print
             attempt). (Version 4.30)

7 Oct2       Made a minor menu change. Now when a file is saved a menu
             header appears above the file specification of the file
             being saved and the main menu disappears. (Version 4.30a)

14 Oct2      Change allows the deletion of all files from the
             AutoRetrieve file. Previously, when an attempt was made to
             remove all files or the only file within the AutoRetrieve
             file, the macro wouldn't allow it to happen - now it does.
             (Version 4.31)

18 Oct2      1. Added ability to enter the AutoRetrieve file while within
             a file. Access is via the "Retrieve: function (shift F10).
             All functions except retrieve a listed file are available
             (print a listed file or delete one or more file listing(s)).
             Hitting the ENTER, EXIT, or ESC key exits this AutoRetrieve
             file listing. 2. Added ability of macro to APPEND a blocked
             region to a file. When ALTF is executed with an active
             block, a menu is displayed with options to save or append
             the defined block to a file. (Version 4.40)

25 Oct2      Added file LOCK option (password). Enhanced WordPerfect
             function. Provides user option to immediately activate
             password/lock or remove password/lock via file save.  NOTE:
             the WordPerfect manual refers to passwording a file as
             LOCKING A DOCUMENT (see LOCKED DOCUMENTS in the manual),
             whereas in their functional (TEXT IN/OUT) menu it's referred
             to as PASSWORD. (Version 4.5)

28 Oct2      The reveal codes wasn't always being restored upon
             completion of the macro. This was fixed. (Version 4.50a)

1 Nov2       Made changes which allow ALTB to rely upon the block
             SAVE/APPEND feature. (Version 4.51)

7 Nov2       Made a minor fix relating to filesaves. Seems that an
             intermittent problem occurred in which document names got
             switched/changed during filesaves somehow. Made minor
             improvements to the password enter/remove options. Added
             some numeric options to submenu's which didn't have them.
             (Version 4.51a)

21 Nov2      Fixed minor bug which prevented MASTER/SUBDOCUMENT
             condensing from properly working. (Version 4.51b)

22 Nov2      Added a display menu documenting the function keys available
             for use by ALTF. Added a master document tool menu for
             condensing or expanding master documents. It includes an
             option for directly entering the associated WordPerfect
             menu. (Version 4.60)

ALT L
5 Nov2       Added function key access to SAVE option (F10) and LIST
             option (F5). (Version 2.10)

12 Dec2      Renamed LINESET. Called from ALTD Now. From now on ALTL
             performs LINE specific functions. See ALTT for more
             information. (No Version change)

ALT M
17 Sep2      PAGE. The options which placed page numbering at the top or
             bottom of the page weren't working correctly and so,
             wouldn't place a page number location into the document.
             (Version 2.55a)

27 Sep2      CROSS-REFERENCES. If the letter option for Indexes was
             chosen in the list definition menu, the macro would fail
             (the numerical menu entry had no problem). The macro now
             recognizes the letter entry as well as the numerical entry.
             (Version 2.55c)

30 Sep2      PAGE. Selecting FOOTER A would select HEADER A instead.
             (Version 2.55d)

1 Oct2       PAGE. Minor improvement in menu handling. Added the option
             "SUPPRESS". This option enters the Wordperfect
             header/footer/page numbering suppress for the current page.
             (Version 2.56)

18 Oct2      Improved the CANCEL operation used during a cross-references
             update session so that the marker flag (used to relocate the
             cursor to its calling location at the conclusion of the
             update) is found and removed correctly. (Version 2.57)

19 Oct2      Added MARGINS option under PAGE option. (Version 2.57a)

23 Oct2      LINES/WINDOW. If reveal codes was on before the window
             option was executed, it wouldn't be restored at the
             conclusion of that option. This has been fixed. (Version
             2.57b)

26 Oct2      TAB_SET. Removed TAB Set and placed in the macro ALT Tab.
             MARGINS. Moved main menu option MARGINS to a menu option
             under PAGE. Moved options 5 (PAGE) and 6 (Screen reset) to
             options 4 and 5 respectively. New options: 6-Table and 7-
             Column. Option 6 is essentially the same as hitting ALT F7
             and chosing the Table option. If the cursor is within a
             table, the macro enters WordPerfect's table edit mode. If
             the cursor isn't within a table, the user is presented the
             option to create or edit a table. Option 7 is essentially
             the same as hitting ALT F7 and chosing the Column option.
             (Version 2.6)

28 Oct2      Made a few changes which allow ALTT (typeset macro) to use
             the LINE function. (Version 2.61)

29 Oct2      ALT M can now call ALT T directly using the TAB key.
             (Version 2.62)

30 Oct2      PAGE. Added force ODD or EVEN options to allow forcing a
             page as even or odd. LINE. Added WIDOW/ORPHAN protection and
             END_CENTERING. Widow/Orphan protection turns on/off
             widow/orphan protection. NOTE: 1) no protection code is
             entered into the document if the option chosen is already
             active. 2) no end_centering code is entered into the
             document if centering is not already active. (Version 2.63)

11 Nov2      COMMENTS. Conversion of a comment wasn't working (fixed).
             (Version 2.63b)

12 Nov2      COMMENTS. Blocked text may now be directly converted to a
             comment. Error handling improved for cases where a comment
             upon which to act does not exist. The option to convert a
             block of text to a comment does not appear unless a block is
             active. Empty blocks generate an error message. (Version
             2.64)

14 Nov2      PAGE. Added NEW PAGE option under the page numbering option.
             This option restarts page numbering at the current page with
             page one. (Version 2.65)

6 Dec2       SPREADSHEET. NEW option. Relies on SPRDSHET.WPM for some
             simplification to working with spreadsheets. This option
             replaces the screen reset option (which is built into the
             ALTM exit routine anyway). (Version 2.70)

12 Dec2      Added a new menu option. PAGE DOWN enters a second menu
             which provides access to hyphenation functions (on or off at
             this time) and the ability to add a word to a dictionary.
             (Version 2.71)

ALTN
16 Oct2      The option "K", menu #2 (large solid box) wasn't working.
             The menu option titles for boxes were changed; the single
             word "(SOLID)" replaced all occurrences of the word "fill"
             (they were removed entirely. Slight rearrangement of box
             options also took place. An additional math option was
             added. This is the triangular dots arrangment known as
             "therefore." (Version 3.00c)

24 Oct2      Minor change made to macro to attempt to avoid an
             intermittent problem. This problem manifests itself by
             dropping the option letter into the document rather than the
             character the option represents. (Version 3.00d)

ALTP
24 Oct2      Fixed problem with block printing when generation of cross-
             references was required (printing failed). Rearranged macro
             code some. Made code international compatible (the
             underlying print operations use the number rather than
             mnemonical code). (Version 2.60a)

1 Nov2       If the answer to "print blocked region" is "YES" then a
             "printing" message is displayed. (Version 2.60b)

6 Nov2       Revamped the OPTIONS menu; the new OPTIONS menu now has the
             following new options:  Select printer, binding, multiple
             copies generated by, initialize, set graphics quality, and
             set text quality. Additionally, the current WordPerfect
             print option settings are displayed.  Changing these options
             is controlled via the macro with the exception of the
             selection of a printer. In this case, the WordPerfect
             select-printer option is entered and the user is dropped off
             there (and the macro exited). Finally, all menu items are
             now accessible by a numerical option as well as mnemonical.
             (Version 2.70)

8 Nov2       Added option to print Summary. Added information in print
             menu help for printing Summary as part of print range and
             printing Logical Odd or Logical Even pages. Logical pages do
             not depend on page numbering. (Version 2.71)

11 Nov2      Improved speed of screen rewrites for certain operations.
             Added printer tips for multiple copies menu. For those menus
             having only a single character option the ESC key now exits
             the macro completely and, typically, the EXIT key enters the
             main menu. Finally, the ENTER key moves to the previous
             menu. If an error of some sort occurs the error message will
             not occur more than twice. Previously, it was possible,
             under some rather unique circumstances, to create an
             infinite error loop in which the only possible exit was to
             reboot the computer. (Version 2.72) 

22 Nov2      Added an option to count document sections from either the
             main print menu or the options menu. (Version 2.73)

30 Nov2      The option to print from a specific page to the end of the
             document or from the beginning of the document to a specific
             page wasn't working correctly. (Version 2.73a)

ALTT
28 Oct2      Provided LINES option. This provides control over line
             spacing by specifying line height and/or the amount of
             additional space to add to wordwrap (a soft return/enter)
             and/or an enter (a hard return). This function is provided
             by accessing existing capabililites of ALTM (Misc Macro)
             LINE function. (Version 1.10)

29 Oct2      ALT T can now switch to ALT M directly using the TAB key.
             This is useful for when typeset functions were called but
             weren't really what was desired. (Version 1.10a)

ALTV (VIEW)
3 Nov2       Major change. Switch (Shift F3) now switches between print
             previewing document screens. For instance, if you're print
             previewing document #1, Shift F3 switches to print
             previewing document #2. To change view colors, as is the
             normal WordPerfect function, hit = and then F3. Hitting
             List (F5) shows the current file's name for a few moments
             before returning to the normal screen. GOTO has been
             improved. The native WordPerfect GOTO prompt display removes
             the menu options, the document number and the page number.
             The macro GOTO prompt also removes the menu options, and
             document number but displays the current page in addition to
             the GOTO prompt. Exiting the macro is performed by CANCEL
             (F1), ESC, or EXIT (F7). If, for some reason, you aren't
             getting the options to work as desired it means WordPerfect
             jumped out of the macro. This is especially possible if you
             run help and hit the EXIT key during the course of going
             through help menus. To re-enter the macro enhanced print
             preview, just re-execute the macro.  Additionally, the
             keyboard definition file no longer contains the print
             preview macro. The print preview macro, ALT V, now points to
             a named macro, VIEW. (Version 2.0)

 4 Nov2      Added a time delay to the filename display. This time delay
             is over-ridden by hitting the ENTER key (the main menu print
             preview menu is then restored). (Version 2.00a) 

15 Nov2      Added a GOTO GOTO function. The normal WordPerfect GOTO GOTO
             doesn't really exist. The function is provided by hitting
             CTRL END. The CTRL END feature is page oriented. This means
             that when a page preview is at the bottom of the page and a
             goto goto (CTRL END) is requested, the macro goes to the top
             of the requested page. If there is no location to return to,
             the normal "Go To" function is entered. (Version 2.00b)

20 Nov2      Made macro table aware. The macro now recognizes ALT HOME-
             left, right, up, and, down arrows; Go to-Home (home, home),
             left, right, up, and down; Go to-up, down, left, right
             arrows. The macro now has the capability to go to a
             particular cell. So, if the macro detects that it's within a
             table a different menu comes up asking about going to a
             table cell or document section. If an alpha character is
             detected the macro assumes you're going for a cell address
             and enters the address prompt. Hitting the ALT HOME or HOME
             arrow keys means you want to move around the table confines.
             Typing a number enters the document section prompt. NOTE:
             the method used to get the addresses (cell versus document)
             are different. This is reflected in the fact that if an
             alpha character is entered it isn't displayed (or otherwise
             recognized except as a flag as to the type of address
             desired); however, if a numeral is entered that number IS
             reflected as part of the address! (Version 1.10)

21 Nov2      When the cursor is in a table and GOTO is executed, as
             indicated in the 20 Nov entry, a menu is displayed asking
             for a cell address or page (or section:page). The user may
             use the menu entries indicated to enter that menu or begin
             typing the desired location. Hitting an alpha key assumes a
             table cell location, hitting a numeral assumes a page or
             Section:page; either menu grabs the letter/number hit at the
             menu (previous version treated the beginning of a cell
             address differently from the beginning a page/section:page).
             Hitting the ENTER key backs out of the menus (if an option
             hasn't been chosen). (Version 1.11)

29 Nov2      Added the capability to go to a particular page within a
             section. Since this capability isn't directly allowed while
             within a page preview, the macro exits to the document
             screen, moves to the desired section and page, and then
             reenters the page preview. The only disadvantage to this is
             that during the GOTO mode, entering a character makes the
             command line blink. This might be a tad disconcerting on the
             slower machines. (Version 2.10)

ALTX
6 Oct2       Hitting ENTER the first time still removes any active help
             or exit options menus but hitting it the second time exits
             the macro. Made a change to the menuing so that if there are
             more than 25 horizontal screen lines the menus stay
             together. Now, rather than the options and help menus
             becoming progressively more separated from the main menu,
             they all stay together. (Version 5.30b)

5 Nov2       Changed the Exit options menu. The Legend is now on the left
             side of the screen, the options is now boxed in, and the
             options revised. When the AutoRetrieve is updated by the
             exit option the letter "A" is indicated; when it's not
             updated the letter "a" is indicated. Likewise, when a file
             save is indicated, "S" is used; no file save is indicated by
             an "s". (Version 5.4)

ALT - (Para)
6 Nov2       Added alternate access to alphabetical options by providing
             character access. Minor programming changes related to flags
             and macro size reductions were made. Access to the
             WordPerfect functions are now provided by numerical access
             (international code rather than language specific). The
             macro was removed from the keyboard definition file. The
             macro accesses a standalone macro called PARA (short for
             paragraph). (Version 3.20)

ALT Tab
26 Oct2      NEW. Enters the Tab Set menu. Same as Shift F8 1 (Line) 8
             (Tab Set). (Version 1.0)

CTRL D (Date)
6 Nov2       Changed macro's access to the WordPerfect functions to
             numerical (international). Added numerical entry to all
             menu's as an alternate menu access. (Version 3.20)

9 Nov2       Made some code improvements to better accomodate the
             addition of the numerical menu entries added to 6 Nov 92
             change. (Version 3.20a)

CTRL G (Graf)
4 Oct2       Removed highlighting from numerical menu options. Added
             mnemomical menu entries for manual border selections. Made
             all mnemonical menu selections uppercase, all other letters
             lowercase. (Version 1.11c)

28 Oct2      Editing options for a figure element would result in finding
             the cursor somewhere inside the border option changes menu.
             This was fixed. An "enhancement" was made in that when a
             request is made to change the options for a particular
             graphic element (box), the macro first locates that box and
             then enters the options menu for that box. When the macro is
             exited, the cursor rests on the code for the graphic element
             itself and immediately preceding the cursor is the newly
             created box options code. (Version 1.12)

31 Oct2      Minor menuing change to help user identify wanting to change
             graphic box options. If the user requests "0" (or any non-
             valid graphic box "number" for that matter) or if the
             graphic number is None, the macro drops the created
             options code at the current cursor location. Otherwise, the
             macro attempts to find the graphic number. For edit
             requests, if the graphic can't be found an error message is
             displayed and the main menu is then reentered.  Likewise for
             box options, if an error message is displayed and then the
             box options are entered. Since no box was found, the macro
             treats the requested box as 0 (None) and drops the
             resulting options code accordingly. (Version 1.12a)

17 Nov2      Some menu's weren't returning to the next level correctly
             when ENTER was hit without choosing an option. This was
             fixed. Removed some redundant code. Option #8 (Shadow) of
             the border options has the same mnemonic as the single line
             border option. This option was therefore changed to H.
             (Version 1.12b)

31 Oct2      Minor menuing change to help user identify wanting to change
             graphic box options. If the user requests "0" (or any non-
             valid graphic box "number" for that matter) or if the
             graphic number is None, the macro drops the created
             options code at the current cursor location. Otherwise, the
             macro attempts to find the graphic number. For edit
             requests, if the graphic can't be found an error message is
             displayed and the main menu is then reentered.  Likewise for
             box options, if an error message is displayed and then the
             box options are entered. Since no box was found, the macro
             treats the requested box as "0" ("None") and drops the
             resulting options code accordingly. (Version 1.12a)

CTRL L (LtrHead)
6 Dec2   The macro had a problem cleaning up after itself if the user
         CANCELED. This has been remedied with this update. Hitting
         CANCEL or ESC at the date prompt removes the letterhead
         information entered to that point. Hitting EXIT at the date
         prompt acts exactly the same as choosing "NO." (Version
         1.30)

CTRL Z (BLNKSCRN)
14 Oct2  Macro now turns off reveal codes if it's active and restores
         it upon exit. (Version 1.02)

13 Dec2  Both screens are now erased while the macro is on. This is
         done in case of a split screen. Also, hitting the = key
         turns on a message display scroll effect (Version 1.02a)

Shift Enh Right Arrow (NextSent)
26 Nov2  Completely rewritten to increase the speed at the size of a
         block is increased (blocking from left to right) or
         decreased (blocking is from right to left). Slower machines
         should notice a nearly order of magnitude increase in speed
         (if used at all). For instance, on a 12 MHz AT, what took
         over a minute to block now takes only about 7 seconds.
         (Version 3.00)

28 Nov2  At the end of a move block end action and the cursor ends up
         at the same location it started from, the cursor is now
         moved to the next sentence. This routine only occurs when
         right to left blocking was used and the cursor, during a
         move, attempts to move into a situation where blocking now
         becomes left to right. (Version 3.00a)

Shift Enh Left Arrow (PrevSent)
26 Nov2  Completely rewritten to increase the speed at the size of a
         block is increased (blocking from right to left) or
         decreased (blocking is from left to right). Slower machines
         should notice a nearly order of magnitude increase in speed
         (if used at all). For instance, on a 12 MHz AT, what took
         over a minute to block now takes only about 7 seconds.
         (Version 3.00) 

CTRL Home (GO To)
14 Nov2  NEW. Enhanced version of WordPerfect's "Go to" command. This
         version allows going to any page within a section much like
         the print command allows printing of a page within a given
         section. The format is the same as for the print command: 
         section #:page number. If no colon (":") is provided then
         the macro goes to the specified page. If a section number is
         requested without a page number, that number is converted to
         a page number. (Version 1.00)

15 Nov2  Tweaked the GOTO GOTO (return to last position) a little
         bit. (Version 1.00a)

20 Nov2  Made macro table aware. The macro now recognizes ALT HOME-
         left, right, up, and, down arrows; Go to-Home (home, home),
         left, right, up, and down; Go to-up, down, left, right
         arrows. The macro now has the capability to go to a
         particular cell. So, if the macro detects that it's within a
         table a different menu comes up asking about going to a
         table cell or document section. If an alpha character is
         detected the macro assumes you're going for a cell address
         and enters the address prompt. Hitting the ALT HOME or HOME
         arrow keys means you want to move around the table confines.
         Typing a number enters the document section prompt. NOTE:
         the method used to get the addresses (cell versus document)
         are different. This is reflected in the fact that if an
         alpha character is entered it isn't displayed (or otherwise
         recognized except as a flag as to the type of address
         desired); however, if a numeral is entered that number IS
         reflected as part of the address! (Version 1.10)

21 Nov2  When the cursor is in a table and GOTO is executed, as
         indicated in the 20 Nov entry, a menu is displayed asking
         for a cell address or page (or section:page). The user may
         use the menu entries indicated to enter that menu or begin
         typing the desired location. Hitting an alpha key assumes a
         table cell location, hitting a numeral assumes a page or
         Section:page; either menu grabs the letter/number hit at the
         menu (previous version treated the beginning of a cell
         address differently from the beginning a page/section:page).
         Hitting the ENTER key backs out of the menus (if an option
         isn't chosen). (Version 1.11)

10 Dec2  Made table aware. GOTO GOTO (CTRL Home CTRL Home) returns to
         a previous cursor location within the table (whether in
         table edit mode or not) (Version 1.12)

12 Dec2  If in other than the main editing structure, GOTO can go to
         a specified character. If in the main editing screen, going
         to a specified character was added to the features provided.
         Hit = at the GOTO prompt. This enters a menu which
         requests a character to go to. (Version 1.13)

CTRL ENH DEL (CUT)
20 Nov2  If blocking is off, the macro now senses if the cursor is
         within a table. If so, a menu is displayed with the options
         to delete the table row (in which the cursor rests) or the
         current word. CANCEL, EXIT, ENTER, or ESC exit from the
         macro. (Version 2.20)

21 Nov2  Trying to block a region within a table cell which has no
         text seemed to leave the macro in limbo. This was fixed.
         (Version 2.20a)

CTRL Ins/Enh Ins (PASTE)
21 Nov2  Senses if within a table. If so, a menu is displayed asking
         to insert a row or to paste text. Choosing the option
         performs the associated task immediately. (Version 1.20)

ADDR2ENV
2 Nov2   Fixed a problem which occurred when an improper end of block
         was found. The result now is better error handling than
         before. (Addr2Env - Version 1.31; AddrSet - 1.10)

ALTKEY
4 Nov2   Updated/modified information for ALT B, M, N, P, V,
         Addr2Env, Barcode. Added ALT TAB (tab set macro). (Version
         2.32.2)

14 Nov2  Broke macro into three parts to keep a manageable size for
         use in computers with relatively minimal memory. (Version
         2.32.4)

ASCII
5 Nov2   Added numbers as alternate menu options. (Version 2.20)

BARCODE
22 Oct2  If the character immediately following the last number of
         the zipcode is a table cell boundary or the end of a column,
         the macro wouldn't terminate normally (nor would it
         necessaryly do it's job correctly, especially if within a
         table!). It should now work as intended. (Version 1.41)

1 Nov2   An improper test resulted in the zipcode, when found, not
         being displayed. (Version 1.41a)

2 Nov2   The tab being entered to position the barcode was being
         entered into the document incorrectly during an address-to-
         envelope-move-with-barcode procedure was being performed. 
         This resulted in the barcode being entered prior to the tab.
         (Version 1.42)

7 Nov2   Encountered a problem with generating zipcode barcode when
         within a table - resolved (the barcode was incomplete and
         incorrect). (Version 1.42a)

CTRLKEY
4 Nov2   Added screen blanking macro, ALT Z (Version 2.31.1)

DP
18 Oct2  Added ability of ALTF display AutoRetrieve file while within
         a file. See ALTF, 18 Oct 92 for further information.
         (Version 1.06)

25 Oct2  Added LOCK option to ALTF menu and options, and the
         OPERATIONS section. (Version 1.10)

5 Nov2   Added numerical options to menu's for ALTD and ALTF.
         Numerical entry for access to the WordPerfect directory was
         changed to a character. (Version 1.20)

22 Nov2  Added support for the SAVE macro's (ALTF) master document
         menu. (Version 1.20a)

ENH
1 Nov2   Removed some code used by OPT for saving blocks of text.
         (Version 1.02c)

5 Nov2   Added numerical/symbol access to all options. Numbers which
         used to access the other menus were converted to Function
         key options. (Version 4.20)

FN
6 Oct2   Modified the placement of the help menu to allow better
         placement in screens with more than 25 horizontal lines.
         (Version 1.52b)

OPT
13 Sep2  Removed some unused code. Fixed a bug which occurred during
         quoting at the end of a document. BLOCK PROTECT option
         added. If blocking is inactive an error message is displayed
         and menu #2 is reentered. (Version 1.00c)

2 Oct2   The subscript/superscript menu now enters the previous menu
         level if the ENTER key is hit instead of an option. (Version
         1.01)

7 Oct2   The copy/move message is now removed if the operation is
         cancelled. (Version 1.01a)

1 Nov2   The SAVE block option was improved to relie upon the
         SAVE/APPEND block feature of ALTF. (Version 1.10)

5 Nov2   Added numerical/symbol access to all options. Numbers which
         used to access the other menus were converted to Function
         key options. The additional option to access SAVE is F10,
         for Del it's the DEL key. (Version 1.20)

7 Nov2   Fixed a minor bug relating to saving a block of text.
         (Version 4.20a)

29 Nov2  Once a block has been defined, the ALT UP and DOWN arrow
         keys move up/down one line (these keys replace the Up and
         Down arrow keys. These keys, which used to do this job, now
         are alternate menu choices to the uppercase/lowercase
         options). Additionally, CTRL UP and CTRL DOWN arrow keys are
         now recognized and move UP/DOWN a paragraph (block must be
         active). (Version 1.20c)

12 Dec2  Added option to add a word to the dictionary. Blocking
         action must be word or no blocking action at all to work.
         This function works on a single word only. (Version 1.21)

SPRDSHET
6 Dec2   Performs spreadsheet related functions. This macro basically
         duplicates the WordPerfect functions but creates ease of use
         not available in the non-macro version functions. This
         macro, which is callable as a standalone, is called from the
         MISCELLANEOUS macro (ALTM) as a menu option. (Version 1.0)

TABLE
14 Oct2  Made minor improvement to blocking entire table. Previous
         method wouldn't block entire table under certain rare
         circumstances. (Version 1.40a)

15 Oct2  When blocking table, column, or row by menu option and then
         hitting the ENTER key (to return to menu #1), the macro
         wouldn't turn blocking off (as desired). This was fixed.
         (Version 1.40b) 

9 Nov2   Placed numerical/character options in menus which didn't
         have them (i.e., had mnemonical choice(s) only). SPLIT and
         JOIN now are menu driven options under macro control rather
         than dropping into WordPerfect's table edit mode. Access to
         menu 1 from menu 2 and from menu 2 to menu 1 was provided
         numerically but has been switched to Function key access
         (F1=menu #1, F2=menu #2). (Version 1.50)

11 Nov2  Added the ability to change the decimal places assigned to a
         column. (Version 1.51)

19 Nov2  Added the ability to hit CTRL Down Arrow to quickly move the
         cursor to the last row of the current column. Improved the
         speed at which the column function blocked a column. Added a
         GOTO option. You specify the table address in terms of row
         and column just as in the standard WordPerfect table edit
         GOTO (for instance, to go to cell D43, hit CTRL Home, type
         D43 and hit the ENTER key). Works with or without an
         active block. (There's still no GOTO GOTO as provided in
         standard WordPerfect). (Version 1.52)

27 Nov2  Made some minor changes in the way certain operations work.
         Copying, moving, or deleting a block no longer exits the
         macro upon completion of its task. Also, there are times
         when exiting to the first menu (blocking options) confuses
         the macro as to the blocking status. If this is the case (at
         the main menu), hit "?". This resets the status of the
         blocking variable and turns blocking off. Use this function
         with care since you can confuse the macro by resetting the
         blocking variable and activating the blocking. (Version
         1.52b)

10 Dec2  Added a GOTO GOTO (CTRL Home CTRL Home) function. (Version
         1.53)

TOC
5 Nov2   Added numerical/symbol access to all options. Numbers which
         used to access the other menus were converted to Function
         key options. (Version 1.20)

9 Nov2   TOC main menu is now at the same height as the MAIN,
         ENHANCEMENTS, and OPTIONS menus (when transferring between
         each). (Version 1.21)
------------------------