TBBS 2.2 - Boca 6-Port Multiport Card Setup

Contact:   eSoft, Inc. (Makers of TBBS)
           15200 E. Girard Ave., Suite 3000
           Aurora, CO  80014
           (303) 699-6565      Voice
           (303) 699-6872      Fax
           (303) 699-8222      BBS
           support@esoft.com   E-Mail

BOCA 6-PORT MULTIPORT CARD SETUP
--------------------------------

TBBS Version 2.2 can support up to one (1) Boca 6-port multiport serial
card.  Due to the architecture of the card, no more than one of these
cards can be used in a single TBBS system.

The setup of the jumpers on the card is as follows:

      J1 = A thru F on Pins 2-3 (Right)
      J2 = A thru F on Pins 2-3 (Right)
      J7 = Pins 1-2 (Left)
      J8 = Pins (Left)

The resulting settings for this board are as follows:

      Port   Base Address   IRQ
      ----   ------------   ---
      1      220            4
      2      228            4
      3      240            4
      4      248            4
      5      260            4
      6      268            4

Multiport Settings in CEDIT:

      Status Port Address:    208
      Multiport Board Type:   BitMap LSB (+)


TBBS0073
Rev. 4/94

Copyright (C) 1994 eSoft, Inc., All Rights Reserved.  Permission granted
to distribute this file in its entirety, without modification, to any
interested party.  Any other use requires the written permission of
eSoft, Inc.

IMPORTANT:  The information herein is subject to change without notice.
Please call or write to confirm factual information of importance to you
or your organization.
