5/13/92            ͻ
                       CREATING LOGOS - OVERVIEW     
                   ͼ

This information explains how to use several applications to create a logo
file. Keep the following in mind when creating a logo file.

o    A logo file must be a graphics file in PCX format.
o    To be used as a logo, the PCX file must be in the FAX directory.
o    The logo file must be black and white (single color plane).
o    The image resolution must be 200 dots per inch (dpi) -- 300 dpi won't
     work.  (Scanning programs and graphics packages typically create images
     at 300 dpi, but fax machines produce images at 200 dpi. You can
     circumvent this conflict by saving the image at 200 dpi [or lower]).
o    The image should be no more than 1712 pixels (8.56 inches) wide and
     600 pixels (three inches) long.   While images longer than three
     inches will work, the text area of the cover page will be
     proportionally decreased from the maximum 36 lines of text.

                   ͻ
                       CREATING LOGOS - COREL DRAW   
                   ͼ

Here's how to create a logo using Corel Draw version 2.0.  (If you want to
convert an existing image into a logo, open the file before going to step 1.)

1.   Choose Page Setup from the File menu, and change the page size to 10.625
     inches by 5 inches.
2.   If you are creating a new image, make sure it does not extend beyond the
     top or sides of the page.   Images that extend beyond the bottom of the
     page will work, but the text area of the cover page won't hold the
     maximum 36 lines of text.

     If you are working with an existing document, choose Select All from the
     Edit menu. Then use Stretch and Mirror from the Transform menu to size
     and position the image to fit on the new page size.

3.   Choose Export from the File menu, and select PCX for file type and 150dpi
     for resolution.  Then name the file.

4.   Copy the logo file to the FAX directory.

                 ͻ
                     CREATING LOGOS - PC PAINTBRUSH IV PLUS 
                 ͼ

1.   Select "Cancel" from the Load a File from Disk menu.
2.   From the Create a New Picture menu, enter:
	    1712 for width
	    600 for height
	    2 for the number of colors
	    Pixels for units.

	Click on OK.

3.   Create your logo.
4.   When you're finished, select "File" from the pull-down
     menu, then "Save As."
5.   Select PCX for the "Image Format."
6.   Name the logo file (to save the file directly to the FAX
     directory, include a path, such as C:\FAX\MYLOGO.PCX).

                       ͻ
                           CREATING LOGOS - ANSEL   
                       ͼ

Ansel is the software shipped with the Intel hand scanner.

1.   For logos that are mostly graphics, scan the image at 256 gray-scale
     setting and 200 dpi (higher dpi for intricate or fine graphics). For
     logos that are text, scan the image at B/W and 200 dpi.

2.   From the File dialog box, click on Save As. Select PCX for File Format.
     Click on Output Format, then select Error Diffusion for Document, Custom
     200 for Destination, and Original Size for Document Size.   Then enter
     a name for Filename (it must have the .PCX extension).

3.   Save the logo file to the FAX directory.
