Software:     VLSI RESPONSE SOFTWARE,  Version 3.1,     August 1, 1993 

Description:  VLSI RESPONSE SOFTWARE is a system which provides
              an 'event driven' response to external events.
              For example, the software can be configured by
              the user to cause his/her computer system to
              automatically perform certain functions when a
              security sensor is tripped. This might include
              sending commands to turn switches on, autodialing 
              you at work to send a voice message, etc. It is
              designed to work in conjunction with popular remote
              automation or security systems like the  X-10, AT&T,  
              G.E., Schlage, Sears, Stanley and many other systems.

Requirements: IBM PC or compatible. 
              2 meg memory
              1.5 meg disk
              Windows 3.1 or greater
              DOS 5.0 or greater
              Hayes compatible modem
              Mouse
              VGA 640 X 480 or higher resolution

Author :      Virtual Logic Systems, Inc.
              Bob Brinkoetter
              4960 Jasper Avenue North
              Lake Elmo, MN  55042

Suggested Installation Instructions:

    1) Make a new directory on the C drive:
           C:>mkdir response

    2) Copy the software from the installation floppy's to new directory.
       For example, assuming that a Response Software installation 
       disk is in drive B: 
           C:>copy B:\*.*  C:\response
       Repeat the procedure for the second installation disk.
       Or if you have the XTZ.ZIP version, use PKZIP version 2 to
       unzip the software to the C:\response directory.
       NOTE: You will also need to obtain a copy of the VBRUN300.DLL
             file, available from Compuserve, Microsoft, or VLSI. It
             is a commonly used language interpreter, not duplicated
             for distribution with this package. 

    3) Go into Windows Program Manager and add a program item
       for the Response System program, under Startup Group as follows:
          a) Under Program Manager, click the Startup Group.
          b) Under the File menu, click New.
          c) Under New Program Object, click Program Item, click OK. 
          d) Under Program Item Properties:
               Description:       Enter Response System
               Command Line:      Enter C:\response\xtn.exe
               Working Directory: Enter C:\response
          e) Click the Change Icon button.
          f) Under Change Icon:
               File Name:         Enter C:\response\earth.ico, click OK
          g) Click OK, the program item will appear with an earth icon
             under the program group you selected.

     4) From now on, you may run the program from within Windows,
        just by double clicking the Response System earth icon.
        If you want to stop running the program automatically each
        time Windows begins, just move (drag with mouse) the earth 
        icon from the Startup Group to any other Group of your choice.

     5) Additional information on installation can be found in the
        on-line help system within the application.

Help:  If there are any questions I can answer about the software....
       Please contact me at my above address or phone (612)770-8937.
            

          

