                         
                    
                    
                       WinPak#1 Version 1.1 README.TXT 
                       -------------------------------
                    

       Hello and welcome to  the  WinPak#1  Version 1.1 software package
       from Rhode Island Soft Systems, Inc.!
   
       This package contains eight unique, custom designed screen  saver
       modules  for  use  with  Windows  3.1.   This package contains an
       automated installation utility that should be used to install the
       screen saver modules.
       
       Most of the files in  this  package  are compressed using the DOS
       "COMPRESS" and "EXPAND" utilities.  The compressed files end with
       an   underscore   on   the   distribution   diskette,   such   as
       "WINPAK1A.SC_".   The  installation  program  will  automatically
       uncompress these files.
       
       The eight screen saver modules themselves must  be  installed  in
       the  main  Windows  directory,  such as "C:\WINDOWS", or whatever
       that directory is on  your particular computer.  The installation
       program  will  ask  for  this  directory  upon   start-up.    The
       documentation  and  other  ancillary  files  will  be placed in a
       sub-directory  called   "WINPAK#1",   below   the   main  Windows
       directory.   If  you  specify  "C:\WINDOWS"   as   your   Windows
       directory,  then  the  documentation  files  will  be  copied  to
       "C:\WINDOWS\WINPAK#1" for example.

       The  following  information will guide you through installing the
       WINPAK#1 files.  Once installed, the  SETUP program will create a
       program group and install  icons  for  the  documentation  files,
       which you can read by clicking on the document's icon.
   
   

                             VERIFICATION OF FILES 
                             ---------------------
                             
       At this point, please look  for  all  of the files that belong to
       the WinPak#1 package.  All of the files are listed  in  the  file
       PACKING.TXT If the PACKING.TXT file or any of the files listed in
       PACKING.TXT  are  missing, please contact us for an official copy
       of WinPak#1 -- it would not  be  fair to either the user or Rhode
       Island Soft Systems, Inc.  to have a user evaluate an  incomplete
       package.
   








       WINPAK#1 - README.TXT                                     Page: 1
       
                              INSTALLING WINPAK#1
                              -------------------
                               
       WinPak#1  is shipped with a comprehensive installation program to
       automate traditional installation.  To install WinPak#1, you must
       be in the Windows environment.   To  install WinPak#1 we will use
       the SETUP program supplied as part of the package.
       
       From Program Manager's main window,  select  "File".   This  will
       cause  a menu to drop down.  Next, select "Run...".  A dialog box
       will pop up requesting a "Command Line".
       
       If the WinPak#1 files are  on  a floppy disk, insert the diskette
       into  the  A:  or  B:  drive,  as  appropriate  and  type  either
       "A:\SETUP" or "B:\SETUP",  respectively.   We  must  execute  the
       "SETUP" program that is located on the floppy disk.
       
       If  the  WinPak#1 files are in a directory on a hard drive, enter
       the full drive and directory path to where the WinPak#1 files are
       located, such as: "C:\DOWNLOAD\TEMP\SETUP".
       
       Please note that these are just examples -- the directories names
       and  drives  will  certainly  be  different  for  each individual
       computer.  The above examples are for illustrative purposes only.

       After entering the command to execute SETUP, press the ENTER  key
       or click on the "OK" button.

       At this point SETUP will handle the entire process of installing
       the WinPak#1 files.  
       
       To activate the screen savers, we must first  select  the  "Main"
       group in Program Manager.  Next, select the "Control Panel" icon.
       Finally,  within  Control  Panel, select the "Desktop" icon.  The
       "Screen Saver" portion of  the  dialog  box  will now contain the
       WinPak#1 modules in  the  list  of  Screen  Saver  "Names".   The
       WinPak#1  modules  can  be  easily identified as they are labeled
       with "WP=>".



















       WINPAK#1 - README.TXT                                     Page: 2
       
