INSTALLING THE HP DESKJET SERIES V.3.0 PRINTER DRIVER 
FOR MICROSOFT(R) WINDOWS(TM) 3.0 AND 3.1 
THROUGH THE CONTROL PANEL
=====================================================

Follow these instructions if you are having difficulty 
installing the HP DeskJet Series v.3.0 Printer Driver for
Microsoft(R) Windows(TM) 3.0 and 3.1 with the HP Printer Setup 
Program.

If you have problems installing printer driver, go to the 
Printers dialog box. If your printer driver appears in the 
Installed Printers list box, select it, click Configure, 
Remove, and OK. Then begin installation again.

If you still need help, call HP CPO Customer Support Center
at (208) 323-2551.



INSTALLING THE DRIVER AND ITS SUPPORT FILES ON YOUR HARD
DISK
=========================================================

1.   Start the Windows program and ensure that no memory
     resident programs are running.

2.   Open the Main group window.

3.   Open the Control Panel icon.

4.   Open the Printers icon.

5.   3.1 users: Click the Add>> button. 

     3.0 users: Click the Add Printer button, then scroll 
     through the List of Printers box until Unlisted Printer
     appears.

6.   3.1 users: Double click Install Unlisted or Updated 
     Printer.

     3.0 users: Double click Unlisted Printer.

7.   Insert the HP DeskJet Series Printer Driver Installation
     Disk 1 into your computer's disk drive.

8.   3.1 users: Indicate the drive into which you inserted your
     disk. Click OK.

     3.0 users: Double click your computer's disk drive in the 
     Directories list box on the right.

9.   3.1 users: Select your printer model from the Add Unlisted
     or Updated Printer dialog box. Click OK.

     3.0 users: Double click deskjetc.drv in the Driver Files 
     list box on the left.

10.  If you are using 5 1/4 in. disks, insert the HP DeskJet 
     Series Printer Driver Installation Disk 2 when prompted 
     and type the drive in which the disk was inserted, then 
     click OK.

11.  Click Close (3.1 users) or OK (3.0 users) to close the 
     Printers dialog box.

12.  IMPORTANT! Exit the Control Panel to ensure that
     the driver is installed properly. This will return you to
     the Main Group window.



SELECTING PRINTER SETTINGS
==========================

1.   Open the Main group window.

2.   Open the Control Panel icon.

3.   Open the Printers icon.

4.   Click your printer driver in the Installed Printers
     list box.

5.   Click the Connect (3.1 users) or the Configure (3.0 users)
     button.

6.   Click LPT1 or COM1 in the Ports list box on the left to
     select the port to which you connected your printer. 
     LPT ports are parallel ports. COM ports are serial
     ports. If no other printers are installed on your
     system, select LPT1. Click OK (3.1 users).

7.   Click the Setup button.

8.   Select your printer settings, as desired.

     Click the Help button for more information on printer 
     settings.



INSTALLING PRINTER FONTS
========================

1.   Open the Main group window.

2.   Open the Control Panel icon.

3.   Open the Printers icon.

4.   Click your printer driver in the Installed Printers 
     list box.

5.   Click the Configure button (3.0 users).

6.   Click the Setup button.

7.   Click the Fonts button.

8.   Click the Printer Fonts button.

9.   If you are using 5 1/4 in. disks, insert the HP DeskJet 
     Series Printer Driver Installation Disk 2 into your 
     disk drive (if it isn't already in the drive).

10.  Specify the directory in which to store your font
     configuration files. Use the default directory 
     (C:\TD\TYPE), or type an alternate drive\directory  
     and click OK.

     For first time installation, you must confirm 
     creation of the new directory (C:\TD\TYPE). Click OK.

11.  Click the Install Fonts button.

12.  Specify the disk drive from which your fonts will be 
     installed in the Install Fonts: Source Directory
     dialog box and click OK.

13.  Specify the directory where your fonts will be stored. 
     Use the default directory (C:\TD\TYPE), or type an 
     alternate drive\directory and click OK.

     The printer fonts will appear in the Printer Fonts From: 
     list box on the left.

14.  Select the fonts you wish to install from the Printer
     Fonts From: list box on the left. Select all or some 
     of the source fonts by pressing and holding the Ctrl key 
     while clicking on the name of each font you wish to 
     install.

15.  Click the >>Copy>> button.

     For first time installation, this process may take
     several minutes. When this is complete, the list of
     fonts you just installed will appear in the Installed
     Printer Fonts list box on the right.

16.  Click OK to close the Install Printer Fonts dialog box.

To create screen fonts for the printer fonts you just 
installed, continue with Creating Screen Fonts, below. Or, 
click Cancel to exit the fonts dialog box and continue with
Activating Your Printer in the next section.



CREATING SCREEN FONTS
=====================

Creating screen fonts is optional; you will be able to use
the scalable printer fonts whether screen fonts exist or
not.

1.   Open the Main group window.

2.   Open the Control Panel icon.

3.   Open the Printers icon.

4.   Click your printer driver in the Installed Printers
     list box.

5.   Click the Configure button (3.0 users).

6.   Click the Setup button.

7.   Click the Fonts button.

8.   Click the Screen Fonts button.

9.   Select the printer fonts for which you wish to make
     screen fonts from the Installed Printer Font(s) list
     box on the left.

     You may select more than one printer font by pressing
     and holding the Ctrl key while clicking each the name
     of each printer font.

10.  Click the >>Create>> button.

     The screen fonts will be created in the following
     standard point sizes: 8, 10, 12, 14, 18, and 24. You
     may add or delete sizes for a screen font by selecting
     the font from the Installed Screen Font(s) list box and
     clicking the Edit Sizes button. Click the Help button
     for more information on editing screen fonts.

11.  Click OK to close the Create Screen Fonts dialog box.

12.  Click Cancel to exit the Fonts dialog box.



ACTIVATING YOUR PRINTER
=======================

Before you may use your printer, you must activate it.

1.   Click OK to close the printer setup dialog box.

2.   3.0 users: Click OK to close the Printers-Configure 
     dialog box.

3.   3.0 users: Click Active in the Status box in the 
     Printers dialog box.

4.   Double click your printer driver to make it your default 
     printer.

5.   Click Close (3.1 users) or OK (3.0 users) to close the 
     Printers dialog box.

6.   Close the Control Panel, returning to the Main group
     window.

7.   Remove the disk from your disk drive and store it 
     in a safe place.

Your printer driver is now installed and set up for use. 
Additional information on using the printer driver can be 
found by clicking the Help buttons in the printer setup 
dialog boxes. 



ACKNOWLEDGMENTS
===============

Microsoft is a U.S. registered trademark of Microsoft
Corporation.

Windows is a trademark of Microsoft Corporation.
