



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   55
    ________________________________________________________________________


    CHAPTER 3:  THE HOME PAD

    At one level, the Home pad is the control center for all the work you do
    with HyperPAD. At another level, the Home pad is nothing more than a
    collection of buttons sitting beneath the question "What would you like
    to do?" The answers to that question are what this chapter is all about.
    To find the answers, we have to look more closely at those buttons and
    where they can take you.

 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    You will recall that many buttons are navigation devices that can
    transport you from where you are to where you want to go. What makes the
    Home pad so special--what makes it, in fact, your gateway to HyperPAD--
    is that it brings together on a single page the buttons that can take
    you to all of HyperPAD's major functions.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   56
    ________________________________________________________________________


    You answer the question "What would you like to do?" by selecting one of
    the Home pad's six main buttons and letting it take you to where you can
    perform the operation you're interested in, which could include any of
    the following:

        0  Running a program that's outside the HyperPAD environment

        0  Managing files that are on your disks

        0  Running a DOS command

        0  Going to a pad to perform an action

        0  Customizing HyperPAD to suit your personal needs

        0  Learning about HyperPAD

    In this chapter, we'll journey to each of these destinations and see
    what you can do once you get there.

    But before we depart, let's give a bit of thought to the return trip.
    After all, whenever you travel, it's comforting to know how to get Home
    again! So in the accompanying table, we've summarized the techniques you
    learned in Chapter 1 for reaching the Home pad from anywhere in
    HyperPAD.

    Action:                     Result:
    ------------------------------------------------------------------------
    Press the F5 key.           Retraces your steps through the pages you
                                just viewed, one by one--even if those pages
                                are in several different pads.

    Press ALT+F5.               Takes you to the Home pad.

    Select the Home button      Takes you to the Home pad.

    Select the Home command     Takes you to the Home pad.
    from the Go menu.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   57
    ________________________________________________________________________


    CUSTOMIZING HYPERPAD

    Let's start by selecting the Customize HyperPAD button. Even though this
    isn't the first button on the Home pad, there are a couple of reasons
    why it's a good place to begin our journey. What you'll learn in this
    section not only could keep you from getting into trouble with HyperPAD
    but will also come in handy later on, when we discuss one of the
    functions you can perform with the Programs pad.

 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    In addition to a text box for your name, the Customize HyperPAD screen,
    shown here, displays three columns of buttons--the first for setting the
    user level, the second for activating or deactivating certain HyperPAD
    features, and the third for choosing which pad appears when you start
    HyperPAD. In the following subsections, we'll take a closer look at
    exactly what each of these controls allows you to do.


    SETTING THE USER LEVEL

    The user level refers to the range of capabilities presently available
    to you while working with HyperPAD. You can choose only one option from
    this group. As soon as you select an option, the previously selected
    option is automatically unselected.

    With the user level set to browsing, you can manage files, run DOS
    commands, and launch programs. You can also open up pads, operate their



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   58
    ________________________________________________________________________


    working parts, read the information in the pads, and use the information
    already entered there to print reports and labels. But you can't perform
    many of the more advanced HyperPAD features.

    When the user level is raised from browsing to typing, you retain all
    the capabilities you had at the browsing level and also gain the ability
    to add text to fields and manipulate text in fields. When you first
    start working with HyperPAD, the user level is set to typing.

    The remaining three user levels (painting, authoring, and scripting)
    enable you to perform increasingly sophisticated operations with
    HyperPAD, such as would be required to redesign existing pads or develop
    new pads.

    Since you'll hardly ever need the more advanced user levels just to
    operate the pads that come with HyperPAD, we suggest that you keep your
    user level set at typing for now. That way, you won't be able to make
    any drastic changes that could accidentally damage your pads. (If you
    think you might be interested in using some of HyperPAD's design
    features, Part 2 of the HyperPAD User's Guide, "Designing with
    HyperPAD," discusses the more advanced user levels and the capabilities
    that come with them.)

    When we describe how to perform those very few operations covered in
    Part 1 of the User's Guide for which you do need a higher user level,
    we'll remind you to reset the user level temporarily for that purpose.
    You should be aware that raising the user level causes additional menus
    to appear and makes some of the menus you're familiar with expand to
    include additional commands. These extra menus and commands are used
    almost exclusively for redesigning existing pads and developing new
    pads, so don't worry about them when they appear. As soon as you finish
    the operation that requires the higher user level and reset your user
    level to typing, they'll disappear.


    SELECTING OPTIONS

    The Options column contains three buttons used to control the display of
    the status bar and tool box, as well as determine how frequently
    HyperPAD saves your work during a session.


    THE STATUS BAR OPTION

    If you select the Status bar option, the status bar is displayed at the
    bottom of your HyperPAD screen instead of the message line. Even if you
    turn the status bar off during a particular HyperPAD session (either by



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   59
    ________________________________________________________________________


    selecting the Status Bar command from the Workspace menu or by pressing
    ALT+SPACE, which toggles both the status bar and the menu bar on and
    off), the status bar reappears once you restart your system or reenter
    HyperPAD after exiting and returning to DOS.


    THE TOOL BOX OPTION

    The tool box is a feature that can be operated with a mouse at the
    painting and authoring user levels. Since you won't need the tool box
    just to use the pads that come with HyperPAD (it's only for performing
    design functions), you should leave this option unselected.


    THE AUTO SAVE OPTION

    If you select the Auto save option, HyperPAD saves your work
    automatically every 30 seconds. If you don't select this option,
    HyperPAD still saves your work automatically but does not do so as
    frequently. Lengthening the interval between "saves" may cause HyperPAD
    to be a bit slower when it does save your work, simply because the
    longer interval gives you time to accumulate more changes for HyperPAD
    to save.


    SETTING STARTUP

    The options in the third column can be used to control which pad is
    displayed when you start HyperPAD. The selected pad then appears
    whenever you first enter HyperPAD from DOS and whenever you reenter
    HyperPAD after having exited and returned to DOS. The selected pad also
    appears whenever you first turn on your computer if you allowed Setup to
    modify your AUTOEXEC.BAT file so that HyperPAD runs automatically every
    time you start your system.

    By default, the Home pad is already selected as the startup option.
    Selecting the second option causes HyperPAD to start at the Programs
    pad, from which you can launch your other DOS and Microsoft Windows
    programs. Selecting the File manager option causes HyperPAD to start
    with the file manager, which, as you'll learn in Chapter 4, you can use
    to manage your files.

    For now, you'll probably want to leave the default setting unchanged so
    that HyperPAD continues to start with the Home pad, since this is the
    pad you'll be most familiar with after completing this chapter. Later in
    this chapter you'll learn about running programs, and in Chapter 4
    you'll learn about managing files. After you understand those two



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   60
    ________________________________________________________________________


    HyperPAD functions better, you might want to come back and select a
    different startup option.


    RUNNING A PROGRAM

    Now that you know what the Customize HyperPAD button can do for you,
    let's press ESC to leave the Customize HyperPAD screen and return to the
    Home pad. Then select Run a program, the first button on the Home pad,
    which takes you to the following pad.

 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    In this section, you'll learn not only how to launch the programs on
    your hard disk but how to perform maintenance functions on the Programs
    list, such as editing program information, scanning your drives for
    additional programs not shown, adding programs, and creating buttons to
    launch programs on the list.


    RUNNING A PROGRAM FROM THE PROGRAMS LIST

    Do you remember running the Setup pad before you started to use
    HyperPAD? Well, one of the purposes of Setup was to let HyperPAD scan
    your hard disk for programs it recognizes--programs that you might later
    want to launch from HyperPAD. After Setup scans your disk, the Programs
    list box displays an alphabetized list of those programs.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   61
    ________________________________________________________________________


    You can launch any of the programs on this list by highlighting the
    program name with the keyboard and pressing ENTER or by pointing to the
    program name with the mouse and double-clicking the left mouse button.

    If HyperPAD knows enough about the program you're launching to make a
    guess about the type of work file the program uses, it presents a dialog
    box that asks "Load a work file?," to which you can reply <<Yes>>, <No>,
    or <Cancel>.

    If you select <No> (or if the "Load a work file?" dialog box doesn't
    appear), HyperPAD runs your program alone, without a work file.

    If you select <Cancel>, HyperPAD returns you to the Programs page
    without launching the program.

    But if you answer the question "Load a work file?" by selecting <<Yes>>,
    HyperPAD asks you which work file you'd like to load by presenting the
    Work File dialog box, shown here.

 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    By entering the right information into this dialog box, you can use
    HyperPAD to save yourself the time and trouble of remembering how to
    load a work file for the program you've chosen.

    To use this dialog box, type the drive, directory, and filename of the
    work file you'd like to load in the Work filename text box. If you don't
    happen to remember all the vital statistics, you can also fill in this
    text box by selecting the filename from the Files list box.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   62
    ________________________________________________________________________


    If the desired work file already appears in the Files list box, here's
    how to tell HyperPAD to load it.


    To load a work file that appears in the Files list box:

    1.  TAB to the Files list box.

    2.  Use the up and down arrow keys to highlight the work file that you
    want to load.

    3.  Press ENTER or select <<Ok>>.

    HyperPAD loads the selected work file and runs the program you want.

    You can also load a work file that appears in the Files list box by
    pointing to it with the mouse and double-clicking the left mouse button.

    If the desired work file is on another drive, use the following
    procedure to view the contents of a different drive.


    To change drives:

    1.  TAB to the Other drives & directories list box.

    2.  Use the up and down arrow keys to highlight the drive that you want
    to view.

    3.  Press ENTER or select <<Ok>>.

    You can also change drives by pointing to the desired drive with the
    mouse and double-clicking the left mouse button.

    If the work file you want is located on the drive whose contents you're
    currently viewing but is in a different directory, here's how to view
    the contents of the desired directory.


    To change directories:

    1.  TAB to the Other drives & directories list box.

    2.  Use the up and down arrow keys to highlight the desired directory.

    If you want to view the contents of the parent directory, select the ".
    ." choice in the Other drives & directories list box. This moves you up
    one level in the directory hierarchy.

    3.  When the directory you want is highlighted, press ENTER.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   63
    ________________________________________________________________________


    You can also change directories by pointing to the desired directory (or
    to the ". ." choice) with the mouse and double-clicking the left mouse
    button.

    Once the desired filename appears in the Files list box, load the file
    as described above.

    Assuming you do run a program (either with or without a work file),
    HyperPAD gets out of your way by shrinking down to 3K of memory while
    the other program is running. When you exit from the selected program,
    HyperPAD reloads and returns you
    to the Programs pad.


    SCANNING YOUR DRIVES FOR ADDITIONAL PROGRAMS

    Suppose you go to the Programs pad with high hopes of launching a
    program that you know is on one of your drives, only to find that the
    program doesn't appear on the Programs list. Why not? When HyperPAD last
    scanned your hard disk, it didn't recognize your program, either because
    the program hadn't been installed on your hard disk yet, or because it
    was located on a remote drive on a network file server, or because
    HyperPAD simply doesn't have the information it needs to launch your
    program successfully.

    You'll have to give HyperPAD a chance to scan each drive where such
    changes have occurred and update its Programs list accordingly. To do
    this, select Misc. from the command line (ALT+4) and then select the
    Scan for programs button from the screen that appears. HyperPAD displays
    a list of drives, from which you can choose the drive you want scanned.
    You can select a network drive if you wish, but be aware that network
    drives can have enormous capacity, leading to a time-consuming scan.

    HyperPAD then scans the selected drive for programs it recognizes that
    don't already appear in the Programs list box. If it finds any, the new
    program names are added to your Programs list, and the list is
    automatically realphabetized.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   64
    ________________________________________________________________________


    ADDING PROGRAMS AND EDITING PROGRAM INFORMATION

    Suppose you want to run a program that doesn't appear on your Programs
    list and you come up empty-handed after scanning for additional
    programs? Perhaps the program you're trying to run isn't one that
    HyperPAD recognizes. To add a program to your Programs list, select the
    Add command (ALT+2) from the Programs screen's command line. The Add New
    Program dialog box, shown here, appears.

 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    To fill out this dialog box, you can use the same procedures you learned
    above for filling out the Work File dialog box.

    After you select a program filename, HyperPAD presents a dialog box that
    asks "Would you like to edit the program description and run
    parameters?" If you answer <No>, HyperPAD simply adds the program to
    your Programs list and realphabetizes the list accordingly.

    If you answer <<Yes>>, HyperPAD presents the Edit Program dialog box,
    shown here. (This dialog box can also be accessed by highlighting a
    program name in the Programs list box and then selecting the Edit
    command [ALT+1] from the command line.) You may want to use this dialog
    box to give HyperPAD some important information about the program, such
    as where to find its work files and how to load them.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   65
    ________________________________________________________________________


 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    The following subsections explain how to fill out the Edit Program
    dialog box. If you need further information about what should appear in
    any of the text boxes in this dialog box, refer to HyperPAD's Help
    system (which can be accessed by pressing F1).


    PROGRAM DESCRIPTION

    The default entry in this text box is the name of the program you
    selected. If you'd like the program name to read differently when
    HyperPAD adds it to the Programs list, you have to change it here.


    PROGRAM PATH

    This is the location of the program on your hard disk. You cannot edit
    this information.


    COMMAND LINE PARAMETERS

    This text box contains optional instructions that HyperPAD will pass on
    when it runs the program. For information on your program's command line
    options, refer to your program's documentation and to HyperPAD's Help
    system.


    WORK FILE DIRECTORY AND WORK FILE EXTENSION

    Earlier in this section, you learned that HyperPAD may ask whether you'd
    like to load a work file when you run a program. The information you
    enter in the Work file directory and Work file extension text boxes sets



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   66
    ________________________________________________________________________


    the defaults for the Work File dialog box, which appears when you run
    your program. The Work file directory text box specifies the location
    where work files associated with the program are stored, and the Work
    file extension text box shows the default extension for your program's
    work files.

    For example, if your Word Perfect documents are located in the C:\WPDOC
    directory and each uses a .DOC extension, you would enter C:\WPDOC into
    the Work file directory text box and .DOC into the Work file extension
    text box.


    KEYSTROKES

    In this text box you tell HyperPAD the exact sequence of keystrokes it
    must use to load a work file from a particular program. You won't
    ordinarily need to edit this text box. If you ever do, refer to the Help
    system (F1) for directions.


    RUN FROM PROGRAM DIRECTORY

    This option, which is selected by default, causes the program to be run
    from its own directory. In rare circumstances, you may want to unselect
    this option, causing the program to be run from the directory in which
    HyperPAD is located.

    When you're through editing program information, select Ok to implement
    your changes and return to the Programs screen, where the new program
    now appears on the Programs list. In the future, HyperPAD will
    automatically run the program according to the additions and changes you
    made.


    RUNNING A PROGRAM QUICKLY

    Here's a program-launching shortcut you can use when you want to launch
    a program that isn't on your Programs list and you don't want to take
    the time to add the program to the list by scanning your drives for
    additional programs or using the command line's Add command.


    To run a program quickly:

    1.  Select Run Program from the File menu (ALT+F, R).

    The Run Program dialog box appears.

    2.  Type the program name, including drive and directory, into the
    Program to run text box.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   67
    ________________________________________________________________________


    3.  If necessary, select the Keep current directory option if you want
    the program to be run from the directory in which HyperPAD is located.

    4.  Select <<Ok>>.

    Your program runs immediately.

    You can also access the Run Program dialog box by selecting
    Misc. from the command line (ALT+4) and then selecting the Quickly run a
    program button.


    REMOVING PROGRAMS

    At some point you may find your Programs list getting a bit cluttered.
    Perhaps you'd like to tidy up the list by removing the names of seldom-
    used programs.

    There are two ways to take unwanted programs off the list. The first way
    is to use the keyboard or the mouse to highlight the name of a program
    you want to remove from the list and select Remove from the command line
    (ALT+ 3).

    The second way to weed out your Programs list is to "mark" programs for
    removal by highlighting the name of each unwanted program and either
    pressing SPACE or clicking the right mouse button. An arrow appears
    beside each program name as you mark it. Then select the Remove command
    to take the marked programs off the list. This method is especially
    handy if you're trying to remove more than one item at a time.

    The Remove command only takes program names off the Programs list. It
    does not remove these programs from your hard disk. After removing a
    name, you could restore it to the list by rescanning the drive on which
    the program appears or using the Add command (ALT+2).



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   68
    ________________________________________________________________________
      

    CREATING A PROGRAM BUTTON

    Once you become proficient in working with HyperPAD and begin to explore
    the other pads that came in your package, you may find yourself wishing
    you had a button you could use to launch one of the programs in the
    Programs list from a different pad. In fact, it's easy to create such a
    button.


    To create a program-launching button from the Programs pad:

    1.  Set your user level to Authoring.

    To do this, go to the Home pad (ALT+F5), select the Customize HyperPAD
    button, reset the User level control, press ESC to return to the Home
    pad, and then select the Run a program button to come back to the
    Programs pad. (If you need more information on resetting the user level,
    refer to the "Customizing HyperPAD" section earlier in this chapter.)

    2.  Highlight the program name in the Programs list box.

    3.  Select Misc. from the command line (ALT+4).

    4.  When the screen of miscellaneous commands appears, select Create
    button.

    HyperPAD presents a dialog box informing you that the button has been
    created.

    5.  Use the Open command from the File menu (ALT+F, O) to go to the pad
    where you want to put the button.

    6.  When you arrive at the target pad, select Paste Button from the Edit
    menu (ALT+E, P).

    7.  To move the button to the desired location, press the arrow keys or
    point to the button with the mouse and drag it while pressing the left
    mouse button.

    8.  To end the button-pasting operation and make the button operative,
    it's important that you press CTRL+B.

    This tells HyperPAD that you're through performing design functions,
    such as pasting buttons, and want to resume using the pads. If you
    forget this step, your pads will no longer work the way you expect!

    9.  Set your user level back to Typing.

    You can now use your new button to launch the program directly from the
    pad where the button appears. When you exit from the program, HyperPAD



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   69
    ________________________________________________________________________


    "remembers" which page that particular program-launching button is on
    and returns you there.

    If you ever want to delete a program button, refer to the directions in
    Chapter 14.


    GOING TO THE DOS PROMPT

    If you want to return to the DOS prompt from anywhere in HyperPAD,
    here's how.


    To go to the DOS prompt without exiting from HyperPAD:

    1.  Select Run Program from the File menu (ALT+F, R or ALT+F10).

    2.  When the Run Program dialog box appears, press ENTER.

    HyperPAD shrinks down to 3K of memory and sends you to the DOS prompt.

    When you want to come back to HyperPAD from DOS, type

    EXIT
    and press ENTER.

    HyperPAD reloads and returns you to the page you were from when you
    selected the Run Program command.

    You can also return to the DOS prompt by selecting Misc. on the Programs
    screen's command line (ALT+4) and then selecting the Go to DOS prompt
    button from the screen of miscellaneous command buttons that appears.
    When you exit from DOS, HyperPAD reloads and returns you to the Commands
    screen.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   70
    ________________________________________________________________________


    MANAGING FILES

    Press ESC to leave the Programs pad and return to the Home pad's Main
    Menu, where you'll learn about the Manage files button next. This button
    takes you to HyperPAD's DOS Shell, shown here, which can be used to
    perform a wide variety of file-management chores.

 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    For instance, the DOS Shell is where you go if you'd like to view the
    files in each of your drives and directories; sort and find files; view
    your files in a tree list format; copy, move, and delete files; and
    browse the contents of files. But we're going to postpone our tour of
    the DOS Shell because this is such a powerful pad that we've devoted all
    of Chapter 4 to explaining the capabilities it gives you.


    RUNNING A DOS COMMAND

    To end your brief journey to the DOS Shell and return to the Home pad's
    Main Menu, press ESC. To proceed to the next stop on our tour, select
    the Home pad's Run a DOS command button, which is your ticket to the DOS
    Commands Index screen, shown here.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   71
    ________________________________________________________________________


 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    The buttons displayed on the DOS Commands Index screen let you perform
    some very common DOS operations within HyperPAD, merely by filling out
    simple dialog boxes. This saves you the trouble of having to exit to
    DOS, look up the long, complicated, and often nonintuitive syntax for a
    particular DOS command, and then type it in.

    But before we check out these buttons, let's take a look at the command
    line. The purpose of the DOS Prompt command is pretty straightforward.
    Select it (by pressing ALT+2) if you want to exit to DOS to run a DOS
    command not available from this page. When you're finished, type EXIT at
    the DOS prompt and press ENTER to return directly to this page. The
    Options command (ALT+1), however, requires a bit more explanation.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   72
    ________________________________________________________________________


    In order to carry out a command listed on the DOS Commands Index screen,
    HyperPAD needs to find the program on your system that runs the command.
    So if you select a command whose program HyperPAD can't find for some
    reason, use Options (ALT+1) on the command line to call up the Options
    dialog box, shown here, which you can use to tell HyperPAD where to look
    for your DOS programs.

 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    If necessary, press F1 to access the on-line Help system, which provides
    instructions for using this dialog box.


    CHECKING A DISK

    When working with DOS, you sometimes need to check how much disk space
    or memory is free. To do this with HyperPAD, select the Check a disk
    button. This produces a very simple dialog box, in which you can specify
    the drive you want to check (the Pick button lets you indicate a drive
    other than the one already shown). Use the two option buttons to tell
    HyperPAD whether you want it to write corrections to the disk and
    display a list of the directories it checked. HyperPAD prints out the
    results in a scrollable field for your review. When you're done, press
    ESC to close the dialog box.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   73
    ________________________________________________________________________


    FORMATTING A DISK

    HyperPAD makes it easy for you to prepare a disk for use. Just select
    HyperPAD's Format a disk button, which brings up a simple dialog box.
    Fill it out by picking which drive to format, specifying what type of
    disk you're formatting, and indicating whether you'd like to make the
    disk bootable and whether you want to assign a volume label to the newly
    formatted disk. Close the dialog box by pressing ESC when you're
    through.


    COPYING A DISK

    A really simple dialog box appears when you select the Copy a disk
    button. All you have to specify is which drive your source disk is in
    and which drive your target disk is in. When you're done, press ESC.


    BACKING UP FILES

    You can also use HyperPAD to run the DOS Backup command, a helpful DOS
    command that receives little use, perhaps because of its difficult
    syntax. HyperPAD merely asks you to fill out a simple dialog box and
    then creates the proper syntax and runs the Backup command for you.

    To run the DOS Backup command, select the Backup files button. A dialog
    box appears that lets you tell HyperPAD the location of the files you
    want to back up (use the Pick button if you prefer to select this
    information from a tree list rather than type it in) and the drive to
    which you want to back up the specified files (again, use the Pick
    button to choose a drive other than the one shown).

    With the option buttons in this dialog box, you can tell HyperPAD
    whether to include subdirectories, back up only changed files, overwrite
    duplicate files, or back up only those files created since a particular
    date or time.

    The default settings for this dialog box are for files to be backed up
    to the A drive and for the Include subdirectories and Overwrite
    duplicate files options to be selected, with the remaining options
    unselected. To instantly restore the default settings, select the Set
    Default button.

    Once you've finished backing up your files, press ESC to
    exit from the dialog box.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   74
    ________________________________________________________________________


    RESTORING FILES

    The Restore files button takes you to a dialog box that you can fill out
    to tell HyperPAD the location of the files you want to restore and where
    you want them restored to. The two Pick buttons are used to change the
    source drive that's specified and to call up a tree list from which you
    can select the target drive and directory. With the option buttons, you
    can control whether subdirectories are included and whether HyperPAD
    prompts you before overwriting files. Press ESC to close this dialog box
    once you're done.


    SETTING THE DATE AND TIME

    Whenever you ask DOS to display a list of the files in your directories,
    it also shows the date and time when each file was created or when it
    was last modified. In order for this information to be accurate, your
    personal computer's clock and calendar must be set properly. The Set
    date and time button gives you an easy way to reset DOS's clock and
    calendar. After you've reset the date and/or time, exit from the dialog
    box by pressing ESC.


    GOING TO A PAD

    Once you're through exploring the DOS Commands pad, press ESC to get
    back to the Home pad's Main Menu, where we'll be selecting the Go to a
    pad button next. This button takes you from the Home pad to the screen
    shown here.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   75
    ________________________________________________________________________


 Ŀ
                                                                        
  **** The Printed Documentation has a picture or screen shot here **** 
                                                                        
 
    

    As you can see, its buttons hint at a variety of intriguing
    capabilities. Just to whet your appetite, let's take a brief peek at the
    pads you can access by selecting these buttons.

        0  Phone:   Enables you to create a flexible, easily accessible
           database of names, addresses, and phone numbers. Selected
           information from this database can also be used to print labels.
           You can access the Phone Dialer pad and the Track Call pad from
           within the Phone pad (as well as from the Pads screen) to
           automatically dial phone numbers in your database and record
           histories of your calls to people listed there.

        0  Phone Dialer:   Dials calls for you if your computer is connected
           to a Hayes-compatible modem. This pad is accessible not only from
           the Pads screen but from within the Phone pad, the Take Message
           Pad, and the Track Call pad, too. Phone Dialer allows you to
           automatically dial a phone number recorded on the current page of
           those pads.

        0  Take Message:   Lets you quickly and easily record phone messages
           on-line and then print them out. If you later decide you want to
           call the individual who left the message, you can access the
           Phone Dialer pad from within the Take Message pad and place that
           call automatically.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   76
    ________________________________________________________________________


        0  Track Call:   Enables you to create (and print out) an ongoing
           history of your calls, both to individuals listed in your Phone
           pad and to others. A timer feature is included, which records the
           starting time and elapsed time for each call you make. The Phone
           Dialer pad is linked to the Track Call pad and can be used to
           automatically place your calls and start the timer.

        0  Project:   Helps you coordinate and monitor the progress of team
           projects by keeping track of who's supposed to do what by when.

        0  Notes:   Enables you to create a database of notes, which can be
           searched for specified material, and also offers the capability
           of printing out the notes, importing text into the notes from
           files created in other programs, and exporting text from the
           notes to files in other programs.

        0  Calculator:   Offers, in addition to a regular calculator,
           specialized calculators for performing financial, scientific,
           programming, and time computations.

        0  Expenses:   Consists of a spreadsheet that business travelers can
           use to record--and automatically total--daily and weekly
           expenses, which can then be printed out.

        0  Letter Writer:   Gives you the capability of creating and
           printing form letters, which you can automatically address to
           selected recipients from your Phone pad's database.

        0  Daily Planner:   Offers vastly more capacity and flexibility than
           conventional printed planners. This on-line appointment book's
           navigation devices let you record and easily access appointments,
           reminders, and notes on pages that are dated months or even years
           from now. Used on a laptop, this planner can go wherever you go,
           keeping you on time and up to date.

        0  Index Cards:   Offers the on-line equivalent of a very large and
           flexible stack of index cards, with which you can create a
           database of information that can be searched, sorted, and
           printed.

        0  Label Printer:   Lets you create a database of labels and then
           print either the entire database or selected items from it onto a
           wide variety of standard Avery labels or onto custom-designed
           labels of your choice.

        0  Network:   Lets you send messages and modify print queues if
           you're running HyperPAD on a Novell network.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   77
    ________________________________________________________________________


        0  Computer Info:   Automatically records important information
           about your system, such as its configuration, memory, and
           settings; allows you to enter general information about your
           computer; and lets you obtain a printout of this information.

        0  Script Printer:  Enables users who are working with PADtalk,
           HyperPAD's scripting language, to print out specified scripts
           created in HyperPAD.

        0  F/X Show:    Lets you view graphic slide shows and animation
           using the FXSHOW.EXE program. (This pad is geared toward users
           who want to operate HyperPAD in conjunction with Show Partner
           F/X, another Brightbill-Roberts program).

        0  Puzzle:   Provides a bit of diversion whenever you're in need of
           a break!

        0  Ideas:   Consists of a storehouse of navigational devices,
           musical and visual special effects, and working parts that you
           can copy and incorporate into the pads you create. (This pad is
           geared toward users who want to work with HyperPAD's design
           features.)

    One enjoyable way to familiarize yourself with what HyperPAD has to
    offer is to spend some time browsing through the pads that can be
    accessed via the Pads screen. And if you ever lose your way, just
    remember to press ALT+F5 to return to the Home pad.


    LEARNING ABOUT HYPERPAD

    The HyperPAD Tutorial is your destination when you select the Home pad's
    Learn about HyperPAD button. You could either select this button and go
    through the Tutorial right now or come back to it whenever you like. If
    you do decide to explore the Tutorial at this point, you may want to
    refer to Chapter 5, which explains in detail how to get the most out of
    this on-line, interactive tour of HyperPAD.



    ________________________________________________________________________
                                            Chapter 3: The Home Pad   78
    ________________________________________________________________________


    CONCLUSION

    Having read this chapter, you should recognize the Home pad as your
    gateway to HyperPAD--the point of access for all of HyperPAD's major
    functions. More specifically, this means you should understand where the
    buttons on HyperPAD's Home pad can take you and what you can do once you
    get there.

    You should know quite a bit about the Customize HyperPAD button (which
    takes you to a dialog box that lets you control important aspects of how
    HyperPAD works), the Run a program button (which takes you to where you
    can launch programs and perform related chores), and the Run a DOS
    command button (which takes you to where you can carry out some common
    DOS commands in a hassle-free way).

    And although you probably won't have an in-depth understanding of
    everything that the Manage files button, the Learn about HyperPAD
    button, and the Go to a pad button enable you to do, you will know that
    file management and the Tutorial are discussed in detail in Chapters 4
    and 5, respectively, and that the Go to a pad button takes you to the
    Pads screen, from which you can reach many of the pads that come with
    HyperPAD.

    Our journey through the Home pad has undoubtedly made you realize just
    how many other exciting HyperPAD features and capabilities remain to be
    explored. So now that you know how to use the Home pad to reach those
    destinations, you can begin taking side trips to additional points of
    interest!
