
Hello OM's !

The program MLOOP is designed to aid construction of magnetic
antennas for frequencies from 1 to 60 Mc. It runs under DOS,
Windows and DOS-window of OS/2.
The calculation of round, square and 8-sided loops is 
possible. The output is provided in three columns.
Different materials, forms, loop diameters, pipe diameters,
frequencies and power ratings may be entered. The Q-factor and 
bandwidth are modified to provide values as they occur in
practice. Loading and saving of the parameters as well as a 
hardcopy is possible. You can calculate also qualified
capacitors for the loop. In the helplines you have two pictures
which show the design of the loop, the link-loop and the
construction of the pipe-capacitor.
To ease the use under windows, an icon was created.
Decompress with PKUNZIP and execute !MLOOP.EXE. Install the
programm with INSTALL.EXE in your choosen directory.
In CGA-mode you cannot see the pictures.

The program is free and can distributed for non commercial
use. This text file must be included in the zip-package.

Reports of errors and other comments are welcome.

                  Have fun!!


Hallo liebe OM's

Das Programm MLOOP ist geeignet zum Eigenbau von Mag.-Antennen
fuer Frequenzbereiche von 1 bis 60 MHz. Es laeuft unter DOS,
Windows und DOS-Fenster von OS/2.
Es sind Berechnungen von runden, 8-eckigen und
quadratischen Schleifen moeglich. Die Ausgabe erfolgt in 3 Spalten.
Es sind Eingaben von verschiedene Materialien, Materialformen,
Schleifendurchmesser, Rohrdurchmesser, Frequenzen und 
Leistungen moeglich.
Die Kreisguete und die Bandbreiten sind so angepasst, dass sie 
in etwa der Praxis entsprechen. Das Laden und Speichern der 
Werte sowie eine Druckerausgabe ist moeglich.
Es koennen fuer die Loop geeignete Kondensatoren berechnet werden.
Zwei Bilder im Hilfetext zeigen die Loop-Formen, die Koppel-
schleife und den Aufbau von Rohrfoermigen Kondensatoren.
Ein Icon zum Aufruf aus Windows wurde auch erstellt. Nach dem 
entpacken mit PKUNZIP erhalten Sie einen selbstentpackenden EXE-
File. Starten Sie !MLOOP.EXE zum entpacken. Mit INSTALL.EXE
koennen Sie das Programm in gewuenschtem Verzeichnis installieren.
Im CGA-Modus koennen keine Bilder gezeigt werden.

Das Programm ist frei und kann kopiert und verteilt werden nur
fuer nicht kommerzielle Zwecke. Dieses Text-File muss im Zip-
Packet enthalten sein.


Fehlermeldungen und Anregungen sind erwuenscht.                  

              Viel Spass beim Basteln!


73's by Hans DK1NB @ DBOTCP.#HES.DEU.EU 
   
***************************************

Comments, reports and errors to Hans via e-mail :
metternich@msmrd.frankfurt.hoechst-ag.d400.de
 
end of file                      
