**********************************************************************
*** Important information for use with PKLITE (R)                  ***
*** Copyright 1990-1992,1995,1996 PKWARE Inc. All Rights Reserved. ***
*** PKLITE Reg. U.S. Pat. and Tm. Off.                             ***
**********************************************************************

This disk contains the SHAREWARE version of PKLITE.
If you distribute the Shareware version of PKLITE to 
friends, associates, or to a computer bulletin board 
(BBS), please distribute the file PKLTS201.EXE
rather than the individual files for PKLITE.  
If you need assistance with installing, or using this 
software, please contact our Technical Support Department 
as follows:

     Phone: 414-354-8699                  Fax:  414-354-8559
     Email: support@pkware.com            Web:  http://www.pkware.com
CompuServe: Go PKWARE          America OnLine:  pkwaresup
   Address: 9025 N. Deerwood Drive        BBS:  414-354-8670
            Brown Deer, WI 53223
            USA



INSTALLING PKLITE

To install the program and documentation files for PKLITE 
version 2.01:


1)  Open a DOS window, if you haven't already.

2)  Change to the drive and directory onto which you are going
    to install PKLITE (for example C:\PKWARE\PKLITE) and copy
    the self-extracting file into that directory.

#)  Type the following and press ENTER:

      pklts201


PRINTING THE DOCUMENTATION FILES

To print the documentation files, do the following:

1)  Using the "cd" command, change to the directory into which
    PKLITE was installed.

2)  Type the following commands:

      copy *.txt PRN and press ENTER
      copy *.201 PRN and press ENTER


Included for use with Windows is a .PIF file and the associated icon
for PKLITE.  This allows you to run PKLITE from within Windows.

NOTE:  Under Windows 95, make sure that the Properties for 
       PKLITE are correct. Under the Program tab, make sure the Cmd 
       line area contains the correct path to PKLITE.EXE and that a 
       ? is placed after the executable name.  For example, if PKLITE 
       was located in the PKWARE\PKLITE directory, the Cmd line would appear
       as the following: 

            C:\PKWARE\PKLITE\PKLITE.EXE ?


